Disabling prints by default but have them around as we will need
them later.
Change-Id: I21d980018286be560b9a072ee08ef0be42b0e788
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We have an array of UDP connections so just go through
the list in a most simple way. Set only the UDP connection
pointer if we found something and clear it otherwise.
This helps to avoid weird errors where multiple UDP connections
were added but only the first one was found during list traversal.
Change-Id: Iae90ee6803eee1d06e7a49211d77692b0cf5ca50
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is better to initialize the UDP connection array
fully in init instead of setting only the port number
to zero. This way we do not have any garbage bytes
left around.
Change-Id: I90dcf6dc39a5a108818f25796160ca7dc52ba9d9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is difficult to know what multicast addresses were added
without this print.
Change-Id: I870a911b14a0349949f1581084d3b4ec4ffb0ecb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This makes the central sample discover the attributes and subscribe
to receive notifications of HeartRate Measurement Characteristic.
Change-Id: Icedbdd759638be0b8fa8515112208aa61ad5eb90
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes central sample to parse the Advertising Data and in case the
device supports HeartRate Service stop scanning and connect to it, if the
device disconnects then start scanning again.
Change-Id: I49962eadb5c82c7a910185212063cd576cadf62e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This will be needed to monitor connections with peripherals.
Change-Id: Iccea2696af72b0b8b3f40aac180738dc6b80abc8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
According to Core vol.3, part A 4.20, if we operate in slave mode,
and we receive a Connection Parameter Update Request, we should
respond with a Command Reject with reason Command not understood.
Change-Id: Icf67eae432836796b8249953f53890b15bc542bf
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
With this patch advertising state and scanning state are stored as flags.
Change-Id: I5d2dc37972620ee89aaf55d45e294e8be82863d3
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Initial setting of allowable commands can be put in one
function since it repeats in few places.
Change-Id: I645731810a2d83179af3e095bc20eb66809d9d8f
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
In smp_init we reset smp so that Pairing Failed command is deleted
from allowable commands and the pointer to the associated conn is lost.
With this patch associated conn is copied and the Pairing Failed
command is marked as allowed.
Change-Id: I7a71f985ca9d9d332e392aeb9368053a8c084750
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds gatt-unsubscribe which works as follow:
btshell> gatt-unsubscribe <CCC handle>
bt: gatt_write_ccc (0x0010edc8): handle 0x0015 value 0x0000
Unsubscribe success
Change-Id: I812fd237f71c4cad8e188015f1cd4cd2f2902aa6
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_gatt_unsubscribe which can used to unsubscribe to attribute
value notification using CCC handle.
Change-Id: I8a3b1594787a3322834516d0306a84c8ef7792dd
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_gatt_subscribe which can used to subscribe to attribute
value notification using CCC handle.
Change-Id: I0983843836b0c2253f750b34b7765dd880cb10a0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds function handler for Handle Value Notification PDU:
> ACL Data RX: Handle 3585 flags 0x02 dlen 8
ATT: Handle Value Notification (0x1b) len 3
Handle: 0x0014
Data: 00
Change-Id: I6faf9c8a3a3f892f889389c08380551268c7202a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Once connected store the bt_conn as context, this save the trouble of
entering the same parameter over and over and remove the lookups from
commands that requires a connection.
Change-Id: I9671b8fa07a1a61db45516f63eb007f19f0e59a1
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
After each response the start_handle shall be updated otherwise it will
loop foverever reading the same range over and over.
Change-Id: I9712f7a6cf0ca5c36460732ea96cf40471631e8a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Change-Id: I50f0f4548fdf5c79c783f4055974e427ba9cbfe8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds fiber which starts with some specified delay.
If the fiber is not cancelled, bt_disconnect is called to
cancel creation of connection.
Change-Id: I06667d970ba3398f205f19f1d2e76ab6c283f274
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Galileo testing uses Linux kexec() feature to load Zephyr OS.
kexec() requires all program headers page size aligned.
Add page size padding to initlevel section in order to make
BSS page aligned.
Change-Id: I7c0e309be70aef45b347b16c6d5c01bdf5659351
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Removes references to obsolete BSP terminology. Where appropriate, replaces it
with platform terminology.
Change-Id: I41fc099844d137dd0ea87cce0f675dc6f022ad40
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes references to obsolete BSP terminology. Where appropriate, replaces it
with platform terminology.
Change-Id: I26c199c50fefc9729ec07c48083bedc86890cc89
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Replaces references to obsolete BSP terminology with platform.
Change-Id: Ibd083558bbbb08a16a68d58251774fb4c84cbbf8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The Kconfig option SW_ISR_TABLE_BSP is not used anymore.
Change-Id: Ifc1be395f5ed7e5d1072a783d800385e69fbc4dc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes references to obsolete BSP terminology. Where appropriate, replaces it
with platform terminology.
Change-Id: Ifb17f98bc12d3a28198810351629a109abdc18a5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes references to obsolete BSP terminology. Where appropriate, replaces it
with platform terminology.
Change-Id: If38c859338c7cf0de58430336e1046b28f9e9944
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Replaces references to obsolete BSP terminology with platforms.
Change-Id: Id5f7760e2d14353a19c020afd8f87d9033ddbf69
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates instructions to use the new platform terminology and build variables
instead of the obsolete BSP nomenclature.
Change-Id: I165982c701cde6e645138b3346e42b4588706ffa
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes references to obsolete BSP terminology from the sample projects and
replaces it with references to platforms where appropriate.
Change-Id: I6c8071a84f77c2cfe1458e3891d2b5e5afdaf8f9
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes reference to the unsupported "-T <toolchain>" option and the replaces
the deprecated "-B <BSP>" option with "-P <platform>".
Change-Id: I21ab863dded9cbfd4fc0ab2fcade59137add08cf
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Add to the configuration that HPET timer legacy emulation
mode is not used, as hardware does not support it.
Change-Id: I51175a0ce8f06c9c38a3fc36f9723e431fc72dd6
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In order to work reliably on QEMU and not depend on the
host CPU frequency change basic_atom configuration to use HPET.
Change-Id: I1253a0224bcbff4a7d54406b089c29b5ace32080
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Qemu implements HPET so that it is connected to IRQ 2, which makes
necessary to use it in legacy emulation mode.
Add legacy emulation mode to HPET driver.
Change the way the HPET driver is initialized. QEMU requires that
the mode (one shot or periodic) gets set prior loading comparator
value.
Add debugging mode to HPET driver to ease the next port.
Change-Id: I668325d5968451585519a08b6c41863cf6e37f88
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Disable the PIC upon initialization to prevent it from
generating spurious interrupts.
Change-Id: I08ba1d00e269e1fd1d32960dcb844e9fa1ccc195
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Fixes README.txt for nanokernel's test_xip to refer to the nanokernel instead
of the microkernel.
Change-Id: I03866e88ec67515b827b901d49b1e7b10d3866d0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes a couple of references to obsolete resource terminology; they now refer
to mutexes.
Change-Id: Ie7f837b6657891bdde9b09bb0ff2311fe4c19928
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The configuration of SRAM and flash options are no longer hardcoded in the
platform's linker script file, but are instead defined in the platform
configuration file.
Change-Id: I557a8228080d607f6add5f86b9b2509ed3fd31ce
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds Kconfig options for specifying the following platform attributes:
SRAM size
SRAM base address
Flash size
Flash base address
This will allow them to be hoisted out of the platform's linker script file
in a later commit.
Change-Id: I09ba5c09d8f34eea5d787c669d77d27d4389d824
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The Cortex-M related Kconfig menus and options no longer show up at the top
level when "make ARCH=arm menuconfig" is issued. They show up under the
"General Platform Configuration" menu.
Change-Id: I6bf012e628212340f5e089d0193a9a71d90c79b9
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Eliminates bsp directory as part of transforming BSPs to platforms.
Change-Id: I8b5366bf32797ddbb1bfa3520ddfeed6344cec2f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes whitespace issues found by checkpatch.
Change-Id: I0bfa6721dcf2d6c0413b4ca39d3c5ea98631b96d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The online help ./scripts/sanitycheck --help describes usage.
Most users will simply want to run with no arguments.
Change-Id: Icedbbfc22599a64a6e3dbbb808ff3276db06f2e0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Performance is about the same, it does not appear to cause issues,
and older versions of QEMU don't support this flag.
Change-Id: Ie45a2396c7b0d3098923244d92b15422491413a1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This fixes issues building in a tree which has symlinks in its path,
for some reason PROJECT_BASE ends up having symlinks removed from it
but not ZEPHYR_BASE, causing Python to generate relative paths
with "../.." (for example) in the beginning. This patch ensures both
have symlinks removed before computing SOURCE_DIR.
Change-Id: I3e0688b602a320d7644834b73cde79cfe91cb677
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Enhances description for pipe definition. Adds examples of pipe
use. Enhances descriptions in pipe API table.
Change-Id: I14485a4c5ef964ab0000699a79d7632ee4130167
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
