Add option to set initial Retransmission Timeout value. The value is
different from NET_TCP_ACK_TIMEOUT since latter affects TCP states
timeout when waiting for ACK for example.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If we receive lot of data fragments, then yield after initial
processing so that TLS thread can start to work on these.
If we do not yield here, we pile up data buffers and might run
out of memory more easily.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It might happen in TCP client, that the TCP connection is terminated
in which case net_context is freed. Check this and mark corresponding
net_context inside net_app to NULL. This way there will be no issue
to access already freed net_context.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The client TLS code did not handle server issued close properly.
Now the connection is terminated properly and TLS thread is left up to
wait more requests from the user.
This commits adds new boolean field to net_app context. Because there
are already multiple boolean flags there, convert them all to bitfields
to save space.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the TLS handshake might take long time before connection is ready,
check this before trying to send user data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print information that we are sending plain data and receiving
encrypted data, the code claimed that we are sending encrypted
data which is not the case here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user closes the client connection, then make sure that
user can just call net_app_connect() instead of calling the
client init. The client initializes everything in net_app but
for simple re-connect that is not necessary.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that objects and samples have their return values fixed, let's
propagate them back up to the user if there's an error.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Previously, post_write and execute callbacks returned 1 when handled
and 0 for error condition. However, this wasn't detailed enough and
the engine can't propagate any sort of error back to users -- so it
doesn't even check the return values in many cases!
Let's adjust the resource callback functions of all objects and the
lwm2m_client sample to return 0 for success or a valid error code.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Now that we can access resource data in the lwm2m subsys, let's use
the user provided firmware push buffer (5/0/0) to also store the
firmware pull data.
This way the size of the firmware pull buffer is completely up to the
application.
NOTE: This patch adds a 64 byte firmware buffer to the lwm2m_client
sample for this purpose.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
With the change to support multi-fragement buffers in the LwM2M subsys,
the OPAQUE data type was direct write methods were broken.
Let's fix OPAQUE handling by using the newly introduced getter methods
which can use multiple user callbacks (depending on the size of the
user provided buffer). Let's also add public methods for users to set
/ get OPAQUE data in resources for future use with DTLS key data.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The lwm2m_engine_get_resource() function needs to be made available to
other portions of the lwm2m subsys in order for firmware resource data
to be used in the future.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
During conversion from the ZoAP to CoAP APIs the use for this variable
was removed, but the variable itself was left in place.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
No need for 2 different defines to specify URI lengths in the source
for firmware pull method. Let's combine them.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Each content formatter should have a way of handling opaque data.
For instance TLV data will individually be able to specify a length
but plain text will take up the rest of the packet.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Now that the LwM2M library can parse across multiple fragements,
let's remove the larger than normal buffer size setting.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The existing LwM2M framework expected contiguous buffers and this
was the reason for the 384 byte buffer sizes. This was previously
a limitation of the ZoAP API. The new CoAP API doesn't have this
limitation and the LwM2M library has already been migrated to use
it.
Let's finish the process by replacing any contiguous buffer handling
with the correct net_pkt APIs to parse across multiple fragments.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
application/octet-stream is used to indicate opaque payload format.
Use plain text handler to handle the opaque format.
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Use-cases for these subsystems appear to be limited to board/SOC
code, network stacks, or other drivers, no need to expose to
userspace at this time. If we change our minds it's easy enough
to add them back.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Certain interrupt-driven APIs were excluded as they are intended
only to be called from ISRs, or involve registering a callback
which runs in interrupt context.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Two tests were on the knife-edge of their current stack limit and
were overflowing when UART system calls were added and userspace
enabled.
Test case stack sizes are often pulled out of thin air, the current
value of 256 was just a guess.
Kick these stacks up to 384; verified with sanitycheck --all that
this doesn't break anything.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
spi_transceive_async() omitted as we don't support k_poll objects
in user mode (yet).
The checking for spi_transceive() is fairly complex as we have to
validate the config struct passed in along with device instances
contained within it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Many APIs had two versions, by port and by pin, which called the same
API with different parameters. This has been reorganized to reduce
the number of system calls.
Callback registration API skipped.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
pinmux_pin_get() needs memory validated for the func parameter since
it's a pointer that gets written to.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The page_layout API returns pointers to kernel memory and is not
exposed to user mode. This is fine for flash_get_page_count()
and flash_get_page_info APIs since these copy the values, but some
redesign work will be needed to get flash_page_foreach() working in
user mode since we do not want the callback running in a privileged
state.
Due to the way that (even unimplemented) system call prototypes are
generated, the definition of struct flash_pages_info needed to be
moved outside of the #ifdef.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Straightforward conversion for adc_enable/disable.
adc_read() uses a sequence table, which points to an array
of struct adc_seq_entry, each element pointing
to memory buffers. Need to validate all of these as being readable
by the caller, and the buffers writable.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
i2c actually only has two entry points into the driver,
i2c_configure and i2c_transfer. All the other APIs are derived
from these.
All derived APIs now just call i2c_transfer() with appropriate args.
The handler for i2c_transfer() needs to examine the message array
and validate all the buffers involved depending on whether we are
reading or writing to them.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add configuration to http_server sample making it possible to work
with USB Device stack with Ethernet ECM protocol.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The call to net_context_recv() with timeout returned -ETIMEDOUT
even when data was returned properly and there was no timeout.
Fixes#4565
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix the controller Kconfig to enable use of fast radio ramp
up by default, hence enabling support for Asym PHY updates
by default on nRF52 Series SoCs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Given that 6lowpan/BLE support is still work in progress, uses
debugging interfaces to setup, has known issues, and otherwise
not widely known or adopted, provided detailed instructions,
including reasonable diagnosing steps on how to set up and test
such a connection.
Tested using 96b_carbon.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Waiting for tx to complete should timeout after 10ms
instead of blocking forever in case ack is not received.
Signed-off-by: Kamil Sroka <kamil.sroka@nordicsemi.no>
In bind_default(), a local variable is passed to find_available_port().
However, the port number is unpredictable as it's not initialized and
will be used directly if not zero. This will lead to problems if the
port number is already used.
This patch makes find_available_port() always returns an available port
regardless of the port number in the sockaddr parameter.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
