Make connection related code splitable. This is in preparation for
not compiling connection related code.
Change-Id: I24e21eb553da4a3522916e5cfe17e4b51526ad4d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to not compile SMP support for devices that don't
require pairing. It is required to support SMP channel and reply
with error for any command received even if pairing is not supported.
To handle this cleanly a null smp implementation is used that case.
Change-Id: I656a52dac882839db904eee65f25a4e29ea2d8c2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to not compile data signing support if it is not
required. Reduces image size of peripheral sample app from
45772 to 44436 bytes.
Change-Id: I2cd3515973d1a70f478cbd68426ec84fd1645d19
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to specify which roles are supported. Broadcaster and
Observer roles are always supported.
Image size reduction for samples apps:
beacon 43148 -> 15196
central 46892 -> 46356
peripheral 47532 -> 45940
Change-Id: If260c13d63651b9b54df5bafc2c412b01dcb1eb0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If remote IO capabilities is KeyboardOnly and local is KeboardDisplay
passkey should be displayed on local side.
This was affecting TC_PKE_BV_01_C Security Manager qualification test.
Change-Id: I4d21925f3f0903250b190ae83eee7f4529114579
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
bt_gatt_subscribe requires setting proper value in the parameters ever
since indication support was introduced.
Change-Id: Ib78dac717874e51e21bc9f8ad10279ba9fe68097
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds gatt-discover-secondary which works as follow:
btshell> gatt-discover-secondary <uuid> [start_handle] [end_handle]
bt: att_find_type (0x00110d18): uuid 0x180f start_handle 0x0001 end_handle 0xffff
Discover pending
btshell> bt: bt_att_recv (0x001134a8): Received ATT code 0x01 len 5
bt: att_error_rsp (0x001134a8): request 0x06 handle 0x0001 error 0x0a
bt: att_find_type_rsp (0x001134a8): err 0x0a
Discover destroy
In addition to this gatt-discover is now renamed to gatt-discover-privary
to avoid any confusion with other discover types.
Change-Id: Iee1fdf3e72269b134e222b4a2c6b4329858e71b0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support to BT_GATT_DISCOVER_SECONDARY to bt_gatt_discover using
Read by Group Type request as following:
Change-Id: I2c3907dcc18ad077c3161fda9ad94fe3b5e4fd45
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support to BT_GATT_DISCOVER_INCLUDE to bt_gatt_discover using
Read by Type request as following:
< ACL Data TX: Handle 3585 flags 0x00 dlen 11
ATT: Read By Type Request (0x08) len 6
Handle range: 0x0001-0xffff
Attribute type: Include (0x2802)
Change-Id: I4452e99f08d0b61cc52fe943eb40527561f3ed60
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add discover type to bt_gatt_discover_params to the API is reduced to
just bt_gatt_discover, this should simplify adding support for
discovering secondary and included services.
Change-Id: Iadeed86fed115afee1340b2c09821d7fafdda0f4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since atoi is available in libc this implementation can be removed.
Change-Id: I3cbb230916f382e27d59b503618b6291c8f0b691
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
All the data shall be sent in little-endian byte order.
Change-Id: I6d4ab0760f92e202ddcb348d30f0d1f208f84f1d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
If tinycrypt is compiled in use it for encryption instead of HCI LE
Encrypt command.
Change-Id: I9cf70540f14ed449bfda52c4a0901462b9a60fe9
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Some tester commands require to response with current settings.
This patch is needed to properly track the changes in these settings.
Change-Id: Ib9c919e804decbe26ba6ab2a23f1c30d812f98ab
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
We are seeing on some platforms that the VMA alignment
does not match the LMA alignment for this section, resulting
in problems when copying into RAM by __csSet(); any copied
sections afterwards end up misaligned in RAM.
While the true fix for this is under investigation, force
4-byte alignment for VMA and LMA.
Change-Id: I627d9e7a3446cbc09dc310a156d8b3268e61c91d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
PCI legacy bridge is a device connected to PCI bus and
allowing to program the routes from interrupt pins to IRQ
numbers.
Change-Id: I129719d71f958bbf5ad8c5c9949dcea93d94b89d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In some cases an MDEF file is not needed, especially when using
private objects. Check if the MDEF file actually exists and define
before trying to use it.
Change-Id: I69c78e6d30bc0df0397e5ae354f91b774fcb737c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Zephyr does not have a MAINTAINERS files, so remove the comment
about checking the file when reporting false positives to avoid
confusion.
Change-Id: I915dba009902a68d5e621603d22b7df57d84a1b1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Created config file for checkpatch ".checkpatch.conf"
Change-Id: Ic2d72eed38b333d4b05d2d0c8953cbe2795d2429
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce a new variant for the Zephyr SDK, do not call it
Yocto SDK anymore.
Keeping the yocto variant for now to avoid breaking developer
setup.
Change-Id: I545693eb4be4cec910096ca2ba7e3f38803b4c8d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Kconfig can't set the default for a choice, so it has to be done
using select.
Change-Id: I1d952eb48a7bcda79b4f8ff475110c7430be7b4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
do not use microkernel or nanokernel as the output binaries,
instead, use zephyr globally.
Also change the documentation to reflect this.
Change-Id: I8405761d1a0392c90cdfeec5c67d72eb4e5a76ff
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
PCI information and integration of designware's gpio controller
with shared irq.
Change-Id: I80c7fed35ff328e06d87ebad3e2f68fdd6f5672e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This application can be used to list the PCI devices through the
console.
Change-Id: I3409ab9025b1f18a42b4cdd594fb095ebeac96f3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Since the console is not yet setup, there will be nothing to be printed
out. Also, it adds a dedicated init function which is only useful for
it. Instead, debugging PCI enumeration can be simply done in application
side.
Change-Id: Ia8384caa97d43f0bc4300ecf36bc11d1b8bd5581
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
