daor-oti and wopu-ot also want to be added automatically as
reviewers to POSIX arch, native_posix, nrf52_bsim and bsim
related test apps.
(see CODEOWNERS for more info about which each is interested on)
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
When checking build directory against cache on windows, certain
corner cases can end up failing the comparison because of case
difference on an otherwise identical path. This can be avoided
by ignoring case on windows.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
Fix host resolving the peer identity address in enhanced connection
complete event when the resolving list in the controller is full and
resolution is done in the host.
Move the handling from legacy connection complete into enhanced
connection complete event so that it is done for both connection
complete events.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Implements several changes to the transport layer segmented tx to
improve group message performance:
- Moves retransmit counter to tx context instead of per packet. As every
unacked packet is sent every retransmit, the retransmit counters would
be the same in each segment. This makes it easier to control progress.
- Delays the scheduling of the retransmit until the completion of the
last segment by adding a seg_pending counter. This is essentially the
same as the old behavior, except that the old behavior might retrigger
the sending before all segments are finished if the advertising is
slow.
- Allows the group transmits to stop as soon as all retransmits have
been exhausted, instead of timing out waiting for acks that won't
come. This allows group tx to finish without error.
- Fixes a bug where a failed TX would block IV update.
- Cancels any pending transmissions of acked segments.
- Reduces log level for several common group tx scenarios that aren't
erronous.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
When available, the shell will use the CDB when configuring. This
replaces the default key for configuration and self-provisioning,
ensuring that there aren't multiple key values for the same indexes.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
* arc supports mpu gap filling now.
* these tests can be used for any arch which supports mpu gap
filling.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
when MPU_GAP_FILLING is configured, the default mpu entry
(kernel read + kernel write) will be used to fill the gaps
among mpu entires to avoid dynamic mpu region splitting.
This will bring better performance in thread switch but fewer
constraints on privileged codes.
when MPU_GAP_FILLING is not configured, a sw-based mpu dynamic
region splitting is used to bypass the limitation of no mpu region
overlap in hardware. This approach will consume more hardware
mpu entries and more time in thread switch.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
arc mpu ver3 does not allow mpu region overlap, so need to enable
MPU_REQUIRES_NON_OVERLAPPING_REGIONS.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Add 2.2.0 to the version pick list. Also remove old versions so that
the oldest one is the LTS release.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a warning about the Gatekeeper issues that Catalina introduces in
the section about GNU Arm Embedded.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The GSG already includes the setup instructions. Remove the
duplicate that existed in installation_win.rst.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The GSG already includes the setup instructions. Remove the duplicate
that existed in installation_mac.rst.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The rx timeout timer callback need update trx_state variable and this
variable is protected by a mutex. Because of that, when compiling the
system with CONFIG_ASSERT=y the system reports 'ASSERTION FAIL
[!arch_is_in_isr()] @ ZEPHYR_BASE/kernel/include/ksched.h:262'.
This refactor the driver remove trx_state variable dependency and
consequently removes phy_mutex and rx timeout timer to be compliant
with kernel rules.
Fixes: #23198
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
When using internal IEEE 802.15.4 transceiver AT86RF233 at SPI speeds
above 6MHz was detected that frame buffer read returns corrupted data.
This set spi-max-frequency to 6MHz at atsamr21_xpro.dts to ensure best
relation of performance vs reliability.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The current version of at86rf2xx RX implementation don't uses advanced
capabilities offer by the transceiver. This access SRAM space to gatter
PHR information in parallel with transceiver frame reception. It allows
improve RX reception by handling properlly the frame protection feature
removing transceiver states changes.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Current rf2xx_thread_main code have too many if/for/while imbrication.
Extract methods from rx2xx_thread_main for better readability.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
blt is signed comparsion, if r6 is a negative number created by
malicious code, it will pass the check, bring a secure risk.
use blo (unsinged comparison) to do the check.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
ARC didn't have many changes, but there's a bunch of irq-related
fixes since the last release, so mention these.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This function is widely used by functions that validate memory
buffers. Macros used to check permissions, like Z_SYSCALL_MEMORY_READ
and Z_SYSCALL_MEMORY_WRITE, use these functions to check that a
pointers passed by user threads in a syscall.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Do not use the content of the status register to write into the
override register because it may have unpredictable effect,
instead to a read/modify/write on the override register.
Signed-off-by: Armand Ciejak <armandciejak@users.noreply.github.com>
It is necessary to poll the ENET_EIR_MII bit before reading
the data register as explained in the i.MX RT1060 reference
manual in chapter 41.7.17.4.
Use PHY_* functions from NXP HAL to correctly access the PHY
registers.
Signed-off-by: Armand Ciejak <armandciejak@users.noreply.github.com>
Extend the bad syscall-ID test case to cover
erroneously supplied larged unsiged syscall-ID
values.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We need an unsigned comparison when evaluating whether
the supplied syscall ID is lower than the syscall ID limit.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Now that the west parts of this file are in better shape, it seems a
shame not to flesh out the rest a bit more.
It's been a while since we looked at this document, as it's still
referring to boards (like Arduino 101) that are no longer supported by
Zephyr, and is generally lacking in concrete, step-by-step advice
for going from zero to working board.
Let's fix that.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This enables the ADC output data to be shifted right when using
10-bit resolution. Or else, data would be left justified as if
it's doing 12-bit ADC with the right 2 bits filled with zeroes.
Fixes#23202
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This includes the following changes:
- modules: Fix bugs in ECIA and PECI headers
- modules: Fix bug in MEC1501 TACH header
- mec1501: fix bits for setting 10-bit ADC resolution
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit fixes the multiple SERCOM interrupt handling for the SAM
D5x and E5x devices by replacing the obsolete device tree symbol with
the new `DT_INST` symbol.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
If the application has used bt_le_oob_get_local to retrieve the OOB
RPA address and OOB authentication information the central role should
use this RPA address for the next RPA timeout period.
The central role always refreshes the RPA address for the initiator,
this will make the OOB information not usable as the peer cannot
recognize the central role since the RPA address is changed.
Check if the initiator can use the address for the duration of the of
remaining RPA period.
Fix central role using the advertiser identity when setting the private
address. The central role should only use the default identity.
Regressions from:
fbe3285bfa
and
4876a8f39a
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
In C++ designated initializers require that designators used in the
expression must appear in the same order as the data members.
In addition, 7-2018-q2-update version of g++ doesn't support
implicit member initialization, so all members must be
initialized.
Signed-off-by: Alexey Eremin <a.eremin.msu@gmail.com>
The third argument in memmove can possible be greater than remaining
buffer size. Just ensuring that memmove will changes bytes only inside
the string buffer and nothing else.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fix possible NULL dereference in BT_DBG statement when
bt_mesh_friend_get is called before a successful cfg_srv init
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
In addition to having security vulnerability fixes reported within each
release note page, consolidate all of them in a new vulnerabilities
document.
This gives us two advantages: 1. The vulnerabilities can easily be
referenced in a single place, which is useful for someone trying to
cross reference against CVE lists, and 2. It allows a release to be made
with just CVE numbers when issues are under embargo, and the details can
be added to this vulnerabilities page. The release notes will be locked
to a tag, and updates will not be visible.
Signed-off-by: David Brown <david.brown@linaro.org>
