We don't have any cases that need 'use-property-label' related to
handling of reg extraction so lets remove it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
No need to evaluate what's the ll reserve size here as net if has a
function to do so.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Tweak ROM usage of quark_se_c1000_devboard so that test_usbnet
test will pass. The board just disables network statistics as
that is not really needed here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that if network packet destination IPv6 address is
interface local scope multicast address FF01::, then those
packets must routed back to us when sending them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the destination IPv6 address is interface local scope multicast
address FF01::, then loopback those packets back to us as that is
the purpose of those addresses. They are to work same way as
localhost unicast address. See RFC 3513 ch 2.7 for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If IPv6 is disabled, then we can skip IPv6 checks and avoid
Coverity warnings. Same thing for IPv4.
Coverity-CID: 189506
Fixes#11100
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This function just stores the buffer pointer passed, so explicitly
mention that the buffer must remain valid while netif itself is
valid. For example, it can't be stored on stack.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This will exclude GATT Client response handlers from compilation
if GATT Client support is disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The API documentation for networking.rst can throw a doxygen warning
depending on the versions of sphinx/breathe being used.
Fixes: #11111
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This is a pure refactoring of the k32src_wait function. It used the
following rules when refactoring:
Don't use the preprocessor when unprocessed C language suffices.
Don't undefine macro's.
Avoid global variables when possible.
Use consistent names for similiar things (hf_clock, lf_clock).
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Now that the samples use DT generated defines we can remove the
hexiwear_k64 specific ones in board.h
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We update 'blink_led', 'fade_led' and 'rgb_led' to support dt generated
defines for the PWM info needed for each. Since hexiwear_k64 supports
generating the info, moved the support for hexiwear_k64 to just use the
dt generated defines.
For 'blink_led' and 'fade_led' we use an alias in dt called 'pwm-led0'.
For 'rgb_led' we use aliases 'red-pwm-led', 'green-pwm-led' and
'blue-pwm-led'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add the Red, Green, & Blue PWM LED info to the device tree. We will use
this in the future for any samples that utilize PWM on these LEDs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add #pwm-cells properties to kinetis dts files and update the yaml
binding to spec the two cells as pin and period (in nanosecond to match
Linux Kernel binding spec).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add support to the extract script to handle 'pwms' client properties.
This is pretty much identical to how we hand 'gpios'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
No need to check for BT being enabled. The UART entries will be
available for use if BT is enabled and will do nothing if not.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The wncm14a2a modem is an add-on/shield and not part of the frdm_k64f
board and should be maintained and configured outside of the board.
This needs to be moved to a shield, see #10965.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix RCOSC calibration initiation to ensure LF clock is
running; and the HF clock is running with crystal before
triggering the actual calibration in ISR.
Fixes#10811.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Convert gpio_cc32xx driver over to using device tree. Added binding
files, updates to dts for various SoCs that use cc32xx.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Driver for LSM303DLHC accelerometer now supports API function
sensor_attr_set for attribute SENSOR_ATTR_SAMPLING_FREQUENCY.
Signed-off-by: Dennis Wildmark <d.wildmark@gmail.com>
New Qemu is emitting binary charachters which is disturbing generation
of XML, so make sure we only log printable charachters.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board can run in recent qemu versions (>3.0.0), so enable it
instead of a dedicated qemu board.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In case no transfer is ongoing, the usb_transfer_ep_callback consumes
the received data. This is however associated with the wrong test. USB
is host centric, so data reception on the device is signaled by
USB_DC_EP_DATA_OUT and not USB_DC_EP_DATA_IN.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We set 'use-prop-label' incorrectly in the st,stm32-ccm binding file.
This property is meant to generate names based on there being a label
property set in the node. For st,stm32-ccm nodes we don't ever set
labels and the binding file doesn't specify a label. So remove setting
'use-prop-label'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Group various shell modules for kernel, peripherals and other
subsystems. This will be used to test board functionality interactively
using commands implemented in the individual shell modules.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add basic 'lspci' command to list PCI devices. This command can be
enabled with the new Kconfig PCI_SHELL.
Example:
uart:~$ lspci
0:1 8086:7010 class: 0x1, 1, 4, I/O, addrs: 0xC000-0xC00F, IRQ -1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If data is received before an IRQ handler was set and enabled,
hardware sets the ORE flag. Once set, the IRQ routine starts
hogging the CPU until ORE is cleared. This change will clear
the flag when user code attempts to drain incoming data.
Signed-off-by: Kiril Zyapkov <k.zyapkov@allterco.com>
Added bidirectional I2S support for Intel S1000
- Added implementation for I2S receive mode
- Extended driver instances to support 3 I2S ports
- Added DMA channel mappings for upto 4 I2S ports
- Utilized k_msgq to track buffers through the driver
- Allocate buffers for audio reception in the driver
- Free buffers after audio transmission in the driver
- Perform buffer reload for DMA after every reception/transmission
- Removed unused Kconfig variables
- I2S_CAVS_TX_BLOCK_COUNT
- I2S_CAVS_RX_BLOCK_COUNT
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Added a mechanism to refresh DMA buffers without the
need to call the "configure" API every time.
The reload is done after every DMA completion.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Config API is meant for initial configuration.
Using config API to reload DMA buffers is inefficient and hence
a reload API is added
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
