For some reason, some users have been facing a bizarre issue
in which the -m32 option was not being passed to the linker
by cmake when building for the POSIX arch as a 32bit target,
even though the option was actually supported.
Instead of using zephyr_ld_options() which checks if an
option is supported and drops it otherwise, use
zephyr_link_libraries()
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This commit adds a NULL pointer check for the destination
context pointer. The pointer is NULL in case the context
does not exist.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
In getting started, in case of macOS and Windows, the need to set
zephyr specific environment variables is only specified several links
away from the getting started, which can be easily missed for someone
who already has the toolchain installed. So just remind the user.
Signed-off-by: Laurent Meunier <laurent.meunier@st.com>
There are some changes that were introduced to the Nordic SW LL,
and as such, in order to maintain compatibility, propragate them
to the OpenISA SW LL as well.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
All states in the thread state diagram were initial-cap except
"suspended". Make it Suspended for consistency.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Expand a bit the README file to cover the compile.sh and
run_parallel.sh scripts, in case users would like to use
them locally, to guide them a bit.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In nRF51 which uses CONFIG_BT_CTLR_LOW_LAT, the advertising
PDU tend to get aborted in directed advertising at event slot
durations.
Dont not use continuous directed advertising event in nRF51
where CONFIG_BT_CTLR_LOW_LAT scheduling design alternative
is used. Instead close the event after each triplet of PDU
has been tx-ed.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the directed advertising event interval calculation.
When CONFIG_BT_CTLR_LOW_LAT is used then prepare duration
has to be included in the event slot reservation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
API comment for k_sem_take included an obsolete note about
porting from the legacy nanokernel interface.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
doxygen does not support ordered (numbered) lists using reST syntax
``1)`` or ``a)`` unless the doxygen comments are bounded by ``@rst`` and
``@endrst`` markers. The "doxygen" way to do ordered lists is to use
``-#``. This PR cleans this up for our API documentation.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
In Zephyr we have the rule of "do not use stdint defined types",
but unfortunately that leaves us with no properly defined
format specifiers for printing values out.
So cast to stdint types in this expression to actually be able to
do so.
Fixes Coverity CID: 205798
Fixes Coverity CID: 205825
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Add the possibility to compile out the PS/2 driver if
the application is not using the KBC 8042 peripheral. This
helps to remove warnings for unused PS/2 isr function
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
This header contains encoding offsets for all the eSPI channels which
communicate data from/to the host.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
Initial implementation of the keyboard controller peripheral
in the eSPI driver. This allows to communicate ps2 and kscan
data between EC and Host
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
eSPI is an aggregator device which is used by other blocks
to communicate with the master. This new APIs allows LPC
peripherals to communicate with eSPI master.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
The discard report is now generated for every run as
sanity-out/sanitycheck_discard.csv, the option --discard-report was
dropped.
Fixes#20804
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
According to API documentation, the bcdDevice field of the USB
descriptor is supposed to represents the Zephyr kernel major
and minor versions as a binary coded decimal value. However,
when using zephyr 2.0, bcdDevice is shown as 0.00 instead of 2.00.
This is due to a typo in the implementation of the BCD macro in
usb_commond.h. This commit fixes the macro.
Signed-off-by: Arnaud Taffanel <arnaud@bitcraze.io>
When building with support for BLE stack on the nRF5340 APP CPU
(Application MCU), use RPMsg HCI driver by default.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
When building with support for BLE stack, enable the BT_ECC
for the nRF5340 NET CPU (Network MCU).
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
When building with support for BLE stack, enable the Vendor Specific
commands for the nRF5340 APP CPU (Application MCU).
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
The HCI transport implemented by an application using the HCI raw
interface may have its own buffer headroom requirements. Currently the
available headroom gets completely determined by the selected HCI
driver. E.g. most of the time this is the native controller driver
which doesn't reserve any headroom at all.
To cover for the needs of HCI raw users, add a new Kconfig variable
for the apps to set to whatever they need. Correspondingly, use the
maximum of the HCI driver and HCI raw headroom requirements for the
buffer pool definitions and the headroom initializations.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The interprocessor communication can be based on shared memory.
Allow to declare this memory as with a generic name derived from
chosen declaration.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
When pass NULL to spi_transceive with user space enabled, stack buffer
is still passed to spi driver and it will cause kinds of problems like
MPU fault, so change it to pass relevant NULL pointers in the actual
transceive call.
Fixes: #20811.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Clarified that clock_control_off and clock_control_async_on can be
called from any context since they are non-blocking.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Description of clock_control_async_on contained information about
delayed start which is not supported by this function call.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This test is failing on platforms requiring a bigger stack size. This
issue is fixed by adding the missing CONFIG_TEST_EXTRA_STACKSIZE to
tweak the thread stack size.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Fix scanning so that we always use active scanning in case the UUID we
are looking for is in the scan response, and disable duplicate filtering
to handle devices that modify their advertising data at runtime, such as
smartphones reacting to apps being opened and closed.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the sample to indicate which device it was using, which helps
mitigate the existing problems identifyin Arduino I2C buses. Also
output a summary of results so cases where no devices are found
provide output after the Starting... line.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
As implemented this test runs for 20 s with no output, which makes it
difficult to identify the cause of failure. Add output indicating
progress, and emit diagnostics a particular failure observed on iMX
boards.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
/lib/libc/ was listed twice in the file
The first entry was overriden by the 2nd
And so was the case for
/samples/bluetooth/
In this second case, the override lost a user, so add it
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Enable SWO debug output during system initialization and not as part of
GPIO driver initialization. After the modification the logger output
becomes available earlier during the boot process. Also, it's not
necessary anymore to build full GPIO driver only to enable SWO. This may
be critical when building small images.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The init macro used outdated spellings for the instance-specific
properties, resulting in build warnings when I2C was enabled.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Provide the mapping from FE310-G002 GPIO pins to the Arduino Uno
headers. Note where pins have pre-assigned functions that may
interfere with use as GPIOs with the default pinmux assignments.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
