Restore including board.h to get USB_VUSB_EN_GPIO and associate defines
if the board.h sets them. This should move to device tree in the
future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
/home/galak/git/zephyr/subsys/usb/usb_device.c: In function ‘usb_transfer_work’:
/home/galak/git/zephyr/subsys/usb/usb_device.c:1156:58: error: passing argument 4 of ‘usb_dc_ep_write’ from incompatible pointer type [-Werror=incompatible-pointer-types]
ret = usb_dc_ep_write(ep, trans->buffer, trans->bsize, &bytes);
^
In file included from /home/galak/git/zephyr/include/usb/usb_device.h:39:0,
from /home/galak/git/zephyr/subsys/usb/usb_device.c:68:
/home/galak/git/zephyr/include/drivers/usb/usb_dc.h:270:5: note: expected ‘u32_t * const {aka long unsigned int * const}’ but argument is of type ‘int *’
int usb_dc_ep_write(const u8_t ep, const u8_t *const data,
^~~~~~~~~~~~~~~
/home/galak/git/zephyr/subsys/usb/usb_device.c:1168:8: error: passing argument 4 of ‘usb_dc_ep_read_wait’ from incompatible pointer type [-Werror=incompatible-pointer-types]
&bytes);
^
In file included from /home/galak/git/zephyr/include/usb/usb_device.h:39:0,
from /home/galak/git/zephyr/subsys/usb/usb_device.c:68:
/home/galak/git/zephyr/include/drivers/usb/usb_dc.h:328:5: note: expected ‘u32_t * {aka long unsigned int *}’ but argument is of type ‘int *’
int usb_dc_ep_read_wait(u8_t ep, u8_t *data, u32_t max_data_len,
^~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move ECM functionality from netusb to function_ecm making defines not
needed in many cases.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When using composite devices, an error is printed during the
initialization:
| [00:00:00.000,000] <err> usb_device: set cb, ep: 0x81
|
| [00:00:00.000,000] <err> usb_device: set cb, ep: 0x1
|
| [00:00:00.000,000] <err> usb_device: set cb, ep: 0x82
|
| [00:00:00.000,000] <err> usb_device: set cb, ep: 0x2
This is actually not an error, but rather a debug message. In addition
it should not contain a new line as it is automatically added by the
logger subsystem.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
usb_dc_status_callback() parameters are interface or configuration
numbers and should be const.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Adding status callback allows to control report sending only when i.e.
device is connected or configured.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
USB controller was performing the fragmentation by itself and the driver
was not aware if current chunk is the last one if data size is equal to
maximum chunk size. Some hardware controllers (i.e. in nRF52840) handle
the status stage by hardware which must be triggered after the last data
chunk.
Currently, the whole remaining data is passed to the driver, and the
driver decides whether to fragment the data internally, or send only
the chunk and report back to the stack.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
Adding spaces around "=" when definining Kconfig template so
that is more consistent with overall style of these template
variables.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
patch add a OUT interrupt endpoint descriptor and registers a
corresponding notification callback with usb driver, which is invoked
when data is sent to device from host.
Implement the read ready notification as suggesteed by
Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
irq_lock returns an unsigned int, though, several places was using
signed int. This commit fix this behaviour.
In order to avoid this error happens again, a coccinelle script was
added and can be used to check violations.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Zephyr UART drivers offer very low-level functionality. Oftentimes,
it would be useful to provide higher-level wrappers around UART
device which would offer additional functionality. However, UART
driver irq callback routine receives just a pointer to (low-level)
UART device, and it's not possible to get to a wrapper structure
(without introducing expensive external mapping structures). This
is an indirect reason why the current UARt wrappers - uart_pipe,
console - are instantiated statically just for one underlying UART
device and cannot be reused for multiple devices.
Solve this by allowing to pass an arbitrary user data to irq
callback, set by new uart_irq_callback_user_data_set() function.
Existing uart_irq_callback_set() keeps setting a callback which
will receive pointer to the device.
While public API maintains compatibility, drivers themselves need
to be updated to support arbitrary user data storage/passing (as
legacy uart_irq_callback_set() functionality is now implemented in
terms of it).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
- Remove redundant 'n' defaults. 'n' is the default value for bool
symbols.
This makes the auto-generated documentation clearer as well: You get
"implicitly defaults to n" instead of
"- n if <propagated dependencies>".
- Shorten
<type>
prompt "foo"
to
<type> "foo"
This works for all types, not just bool.
- Various formatting nits.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
implement a method that can set SN string descriptor at runtime.
but runtime SN and default SN configured in Kconfig must has the
same length.
Fixes: #6593
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Remove some 'default ""' properties on string symbols too.
Also make definitions more consistent by converting some
config FOO
<type>
prompt "foo"
definitions to a shorter form:
config FOO
<type> "foo"
This shorthand works for int/hex/string symbols too, not just for bool
symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Since vendor commands cannot assume that wIndex keeps interface number
we change logic trying to call every vendor handler which should check
input parameters.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Set subCompatibleID value according to "C:\Windows\INF\rndiscmp.inf"
file. The exact matching part is:
"USB\MS_COMP_RNDIS&MS_SUBCOMP_5162001"
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support for MS OS Descriptors. The patch structures already
existing code for webusb to the single place to be easy added to other
places.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add loopback function. This function can be used to test
USB device drivers and device stack connected to linux host
and has the similar interface as "Gadget Zero" [1] of the Linux
kernel.
Use modprobe usbtest to load the module, see also [2] for the
description of the tests and for Vendor and Product ID of the
"Gadget Zero". The userspace tool testusb [3] is needed to start
the tests.
[1] linux/drivers/usb/gadget/function/f_loopback.c
[2] linux/drivers/usb/misc/usbtest.c
[3] linux/tools/usb/testusb.c
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Add callback codes for Set/Clear Feature ENDPOINT_HALT.
These can be used to inform a function that the device stack has
received Set/Clear Feature request ENDPOINT_HALT. The function can
then abort or restart the transfer accordingly.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
After PR #8608 every driver should call ethernet_init(), fixes missing
chunks of that PR.
Fixes: #8752
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix possible null pointer dereference if the device
descriptor is not complete.
Fixes: #8700
Coverity-ID: 186841
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
bcdUSB has been previously updated from 1.1 to 2.0 in default
device descriptor, but not in DFU class. After USB bus reset
performed by dfu-util, alternative descriptor is registered
with bcdUSB set to 1.1. This mismatch causes communication failure.
DFU descriptor's bcdUSB has been updated to match default one.
Relates to #7570
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
Remove all CONFIG_*_EP_ADDR options but keep the default
values for it, as they are necessary to find ep_addr in
usb_ep_cfg_data associated with bEndpointAddress in
interface descriptor.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
At the moment USB Device stack is not possible to enable for
native_posix architecture since there is not USB controller.
The patch allows to enable stack making possible to use it in unit
tests.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The payload size was hardcoded to 64.
This commit adds a configuration option to choose > 64 bytes
when the device allows larger packets.
A configuration option USB_HID_MAX_PAYLOAD_SIZE is added in
subsys/usb/class/hid/Kconfig
The default value is set to 64
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
A HID application can no longer write to the default
interrupt IN endpoint because the addresses are assigned
dynamically. Add hid_int_ep_write() function and leave
it to the hid-core to call the usb_write() with the correct
endpoint address.
fixes: #8424
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Adapt functions for new composite interface.
Assign bInterfaceNumber and similar variables of a Interface
default values, these should be valid values for non-composite
configuration. For the case of the composite configuration,
these variables must be set by the interface configuration
function (interface_config) accordingly.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch reworks composite device support. It allows the
functions to be modular and the user to combine its own
functions with the USB functions of the Zephyr OS.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Introduce function to configure interface descriptor at runtime.
It is simple to leave the corresponding function to configure the
interface descriptor and fix bInterfaceNumber and iInterface values,
for example.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Add the routine to validate endpoint address and update the endpoint
descriptors and usb_ep_cfg_data at runtime.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch changes all class functions so that the endpoint
address will be retrieved from the usb_ep_cfg_data at runtime.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch moves the descriptor parts to related class
and function drivers and extends the usb_fix_descriptor
function so that the wTotalLength and bNumInterfaces
are corrected before enumeration.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch simplifies the handling of the string descriptors.
It introduces common macro for all string descriptors to
calculate the length of the bString.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The Kconfig option HID_INTERRUPT_EP_MPS does not have a prompt entry,
so it is not configurable in practice. Fix that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use transfer API for ACL out transfers. No extra buffer is requested,
directly use the net buf and update its len on transfer completion.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Bluetooth net buffers have 1-byte reserve, which can be used by HCI bus
driver (uart, spi...) to set packet type (H4).
This fixes assert when building hci_usb with CONFIG_NET_BUF_SIMPLE_LOG.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Calling bt_send from IRQ context is not safe, at least in HCI SPI case.
In the same way as hci_core, create a thread for TX.
This fixes hci_usb sample for 96b_carbon board.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Do not set protocol in interface descriptor. Although this field has
been ignored by major OSs during the last decades, this creates a big
deal of problems with ModemManager sending unexpected AT commands when
plugging in a dev board.
Fixes: #6646
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This patch prevents eem_read_cb from trying to allocate a lot of memory.
It may happen that EEM payload size is zero, the eem_read_cb then tries
to allocate a buffer which is 0xfffc bytes large and luckily blocks.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The Kconfig symbol CONFIG_USB_DEVICE_HID_BOOTP isn't defined anywhere,
so remove dead code associated with it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rename CONFIG_RNDIS_TX_BUF_* to CFG_RNDIS_TX_BUF_* and rename
CONFIG_RNDIS_CMD_BUF_* to CFG_RNDIS_CMD_BUF_*. The CONFIG options where
not exposed in Kconfig so limit use of CONFIG_ to Kconfig only symbols.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Implementation of Get Descriptor Request should not return interface
or endpoint descriptors in a single request without configuration
descriptor, see USB Spec. Revision 2.0, 9.4.3 Get Descriptor
This patch fixes linux kernel usbtest subtest 7 and subtest 11 errors.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The 'if condition' in usb_handle_control_transfer is diffcult
to understand. So I rewrite another version.
Fixes#7340
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Add support for enabling multiple disk interfaces (Flash, RAM)
simultaneously in Zephyr by introducing a simple disk interface
framework where we can register multiple disks which would
interface with different storage devices. This would enable us
to have multiple instances of FATFS in Zephyr.
Add support for mass storage drive disk name which will be
used as an argument when calling the disk interface API's.
Enable multiple volumes support configuration in
ELM FAT library.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This patch moves USB DFU class driver to subsys/usb/class.
For the first the USB DFU class driver depends on DFU image
manager and partition layout and is limited to use as an
application for the bootloader. The driver fetches the
information about the flash, erase block size, write block
size and partitions offset from the DT now. The driver has
two interfaces associated with the two partitions "SLOT-0"
and "SLOT-1". The "SLOT-0" can only be read.
In the following work the class driver can be extended so
that it can be used from the bootloader and update a flash
region directly from the bootloader.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Fix regression with RNDIS due to different USB configuration method.
RNDIS drivers in Windows never call Set Interface and netusb is always
disabled. Change to enable netusb upon USB Set Configuration.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Some buggy system may be pass a larger wLength when it try read
HID report descriptor, although we had already tell it the right
descriptor size.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Implement Bluetooth over USB functionality through Bluetooth raw
access to the Bluetooth controller. Most devices with Bluetooth and
USB controllers supported by Zephyr can export themselves as USB
Bluetooth dongles.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
set_report() is used by the host to set a feature on the device such
as turning a LED on or off.
This is also used by protocols such as FIDO U2F to transfer data to
the device.
Signed-off-by: Michael Hope <mlhx@google.com>
int_in_ready is an optional callback that is called when the current
interrupt IN transfer has completed. This can be used to wait for the
endpoint to go idle or to trigger the next transfer.
This is needed for protocols like FIDO U2F that use the interrupt
endpoint for transfers.
Signed-off-by: Michael Hope <mlhx@google.com>
Add CDC Ethernet Emulation Model function driver. This usb network
function can be used for ethernet over USB. Ethernet packet are
encapsulated within EEM packets. An EEM pkt contains 2-byte header
and 4-byte sentinel (or crc).
Note that EEM packets can be split across USB packets but shall not
be split across USB transfers.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Consider media connected when interface is selected by the host and
disconnected on device diconnection.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
This allows creation of virtual lan (VLAN) networks. VLAN support is
only available for ethernet network technology.
Fixes#3234
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As per uart_pipe.c, irq_is_pending should only return true if any
*unmasked* interrupts are pending.
The device_get_binding() code only checks devices that have an API.
Set the API at compile time so that other devices can refer to the CDC
ACM driver.
usb_write() may return EBUSY if the endpoint is full. Propagate this
for future use.
Signed-off-by: Michael Hope <mlhx@google.com>
net_eth_get_hw_capabilities() calls .get_capabilities() which is part
of the ethernet API but not the net_if_api that netusb implements.
This causes a fault as .get_capabilities() was past the end of the
struct and resolved to a random address.
Also, make the API const and give it a unique name.
Signed-off-by: Michael Hope <mlhx@google.com>
Add new status event indicating an interface has been selected.
Interface and its endpoint(s) are enabled.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
The transfer API provides 'high' level functions to manage sending and
reception of USB data. A USB (class) driver has to register the generic
usb_transfer_ep_callback as endpoint status callback in order to use
the API.
With this API, the class driver does not need to take care of low-level
usb transfer management (packet splitting, ZLP, synchronization...).
The usb_transfer methods will split transfer into multiple transactions
depending endpoint max size and controller capabilities.
Once the transfer is completed, class driver is notified by a callback.
The usb_transfer method can be executed in IRQ/atomic context.
A usb_transfer synchronous helper exists which block-waits until
transfer completion.
In write case, a transfer is complete when all data has been sent.
In read case, a transfer is complete when the exact amount of data
requested has been received or if a short-pkt (including ZLP) is
received.
transfer methods are thread-safe.
A transfer can be cancelled at any time.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
In order to avoid confusion between "Unicode", UTF8, UTF16, UTF32,
and endianess of these encodings, rename all instances of "Unicode"
in the USB subsystem and samples into "UTF16LE".
Signed-off-by: Iván Sánchez Ortega <ivan@sanchezortega.es>
Make it possible to change USB manufacturer, product and
serial number strings by forcing prompt in the kconfig files.
Signed-off-by: Iván Sánchez Ortega <ivan@sanchezortega.es>
This fixes a bug in the cdc_ecm Ethernet over USB driver. The ECM
spec (section 3.3.1) says that the end of an Ethernet frame is marked
using the USB short packet mechanisim, where the last packet is less
than the maximum packet size. If the Ethernet frame is a multiple of
the USB maximum packet size then a final zero length packet must be
sent.
Linux however sends a one byte packet (usbnet.c:1393) to work
around hardware issues with zero length packets.
The current Zephyr driver works most of the time except when you send
an Ethernet frame of the right length where the last byte is zero,
such as:
$ ping 192.0.2.1 -s 23 -p 0
Zephyr then drops the last byte, creating a short frame which gets
dropped higher up in the stack.
Signed-off-by: Michael Hope <mlhx@google.com>
Fix Kconfig help sections and add spacing to be consistent across all
Kconfig file. In a previous run we missed a few.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch reworked logging so that the logging levels are more
finely graded and the locations with non-critical error handling
(below usb_ep_set_stall's) are logged with SYS_LOG_WRN.
Also cleanup, add log domain and fix indents.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
At the moment CONFIG_SYS_LOG_USB_LEVEL name does not specify that this
is log level for the Device Stack. Make it clear renaming to the
proper name.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Document USB Vendor and Product IDs and their intended usage.
Set the Vendor and Product IDs and define the USB bcdDevice
Device Descriptor Device Release Number to be the binary
coded decimal representation of the Zephyr major and minor
kernel version number.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Instead of accessing the environment variable ZEPHYR_BASE every time we
require accessing the source code root, use an intermediate variable
that has OS path separators correctly set to '/' to avoid issues on
Windows.
Note: This removes the ZEPHYR_SOURCE_DIR CMake variable. External
applications using that will need to change to use the new ZEPHYR_BASE
variable.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Even if endpoint addresses are configurable by each platform,
it would be better to make the default configuration compatible
with a larger board range.
e.g. STM32 OTG FS device has only four endpoints (0x84 is out).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Sometimes we need to select Endpoint addresses manually to get it
working with certain USB controllers having limit for endpoints. In
this case default values break endpoint limit check. The proper
solution would be automatic endpoint allocation.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support for selecting Endpoint numbers and move it under USB
Device Networking menu.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
conf member represents the configuration state of the device.
Change its type from u8 to bool and clean related functions.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
netusb endpoint config is specific to the function (ECM, RNDIS, EEM..).
Move this config to the function interface.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Move class_handler and send_pkt to netusb function interface.
This makes netusb 'function' agnostic.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Today, we support/use only one USB configuration descriptor.
Moreover I assume multi-config support should be managed at
usb core level and not by each class driver.
Let's track one netusb function per netusb instance for now.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
In a case we get packet without fragments return -ENODATA.
The bug was discovered by Coverity.
Fixes#4637
Coverity-CID: 178334
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use documentation defined values for virtual devices MAC addresses in
Zephyr and Host OS.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Ethernet emulation device allows to use networking interface for
interaction with USB endpoints.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Vendor ID and Product ID should be assigned on build time by
respective process.
For sanity check we assign some random values which are only used for
build tests and should not be used for real products.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This patch adds composite support for USB class drivers.
It acts as a relay between the usb_device stack and
class or function drivers.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Add common device descriptor for USB class devices.
The common descriptor allows easy configuration of Manufacturer,
Product, SerialNumber strings and PID/VID.
It also allows future support for composite devices.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Composite multifunction USB devices should be able to know about
configuration change, implement it through existing callback.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Sometime it is observed on the Arduino 101 that when we write more than
4 bytes into TX USB Endpoint, first 4 bytes are getting repeated
(frequency of occurrence ~1/3000).
This patch does following :-
1. In sample application "cdc_acm", it adds capability to
handle partial transfer data incase data is transferred partially
if exceeds maximum data transfer size.
2. It restricts write of more than 4 bytes into TX USB Endpoint.
This is work around to avoid issue occarance.
Jira: ZEP-2074
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The highest endpoint number supported by the STM32F4xx USB device
controller is 3. Change the cdc_acm driver to use endpoint 2
instead of endpoint 4 so that it will work with this platform.
Change-Id: I4a3cd08f546a7fe01558528de0990156f642d93b
Signed-off-by: Christer Weinigel <christer@weinigel.se>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: Icbf9e542b23208890a3a32358447d44cdc274ef1
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix doxygen comment typos used to generate API docs
Change-Id: I3efff6f5fa26f87d1e658d6336fef01ce45f5bb0
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Disk IO functions are used by both FS and USB Mass Storage.
This patch refactors those from FS directory to a separate one.
In addition existing, config options were modified to make
stuff meaningful.
Jira: ZEP-1276
Change-Id: Ia2a2e18f3dbbbdb964c3dc0427d8138ad86134cd
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Certain structures and defines in this file are from
from mbed's implementation. The file header is updated
as per this.
Change-Id: I688917cdd17cfc8b27d5b78181ced90df73c9efd
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
- {} are always required on if/for/while
- no break line before an if, if condition is testing previous
assignment
- parameters indentation etc...
Change-Id: I83f217c02733b9e63ef1e752f55937f3d7dc03e1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
s/nano_sem/k_sem + some necessary changes for the k_sem to work.
Change-Id: I96377083f5e17631b63d6da1a0546966ec95ff8b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add support for console output via the USB UART.
Note that console input via the USB UART doesnt work.
Adds a simulated poll method for UART interface exposed by USB.
Jira : ZEP-775
Change-Id: I357827ea52c027eb000baed80225f422df1f3358
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
This patch implements USB Mass Storage device Class,
which allows the Zephyr target Board to appear
as a USB drive to a host.
This code would invoke disk_read() /disk_write()
hooks which are to be provided by the storage
layer.
The Mass Storage protocol state machine is based on
mbed's implementation. We augment it by adding Zephyr's
USB transport and Storage APIs, and offload disk ops
to a fiber context rather than in the USB irq context.
origin: https://developer.mbed.org/users/mbed_official/code/USBDevice/file/01321bd6ff89/USBMSD
Jira: ZEP-233
Change-Id: I8199598c76da20ab20012d81dac7615f6a366303
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
USB class drivers may need to offload some work from
upcall interrupt context to a background fiber. This
requires some way to defer taking more data from host
till the offloaded work completes. Two APIs are added to
achieve this.
Further USB class drivers sometimes need to set STALL condition
on end-points to signal errors to host.These too are
added.
Change-Id: Ic973522c3394e23d7f9c4c67affc0cd050afc20f
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>