After recent changes to shell, there is no more "no_such_command:
command not found" message when executing non-existing command. Restore
that message, so users are warned once again about wrong command,
instead of silently ignoring their request.
Fixes: 512de5ecac ("shell: Refactor command execution to enable raw
arguments")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Some Kconfig defined devices may be defined using dt_chosen_label
function. Since there is no way to ensure a device enabled in dts
is also defined in Kconfig, it may happen that instance is not
actually defined.
In this case device_get_binding might return 0, leading to undefined
behavior in the function that calls it.
When not already done, systematically check return of function
device_get_binding on devices defined through dt_chosen_label macro.
Trigger ASSERT when required and return error when possible.
Fixes#20068
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Default values were fixed in the code. Moved to Kconfig to allow
customized configuration. Custom configuration may be used to prevent
line breaking injected on terminal width.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When the device driver model got introduced, there were no concept of
SYS_INIT() which can be seen as software service. These were introduced
afterwards and reusing the device infrastructure for simplicity.
However, it meant to allocate a bit too much for something that only
required an initialization function to be called at right time.
Thus refactoring the devices structures relevantly:
- introducing struct init_entry which is a generic init end-point
- struct deviceconfig is removed and struct device owns everything now.
- SYS_INIT() generates only a struct init_entry via calling
INIT_ENTRY_DEFINE()
- DEVICE_AND_API_INIT() generates a struct device and calls
INIT_ENTRY_DEFINE()
- init objects sections are in ROM
- device objects sections are in RAM (but will end up in ROM once they
will be 'constified')
It also generate a tiny memory gain on both ROM and RAM, which is nice.
Perhaps kernel/device.c could be renamed to something more relevant.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Added special flag that can be used to indicate that optional
arguments are passed without any parsing (e.g. quotation marks
removal). Modified execute command to parse command line buffer
argument by argument.
After this change it is possible to forward whole command to
command handler (using select).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
At present it is not possible to write a printf()-like function in
board code which outputs to the shell. Add shell_vfprintf() to permit
this.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is useful to run tests which generate shell output and check that it
is correct. Update the existing 'dummy' backend to support this.
It works by retaining the output in a small buffer so that it can be
read and checked by the test.
Signed-off-by: Simon Glass <sjg@chromium.org>
Improve hexdump output of shell_hexdump() to match what is currently
printed by LOG_HEXDUMP*() family of functions. That way string buffers
that are sent/received using shell commands can be easily presented
using shell_hexdump() without loosing user experience (with previous
shell_hexdump() that printed only hex bytes) and code validity (printed
buffers are not always NULL terminated with only printable characters).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
New function allows to set from the code the root command. It is
an equivalent of calling 'select <rootcmd>' except it sets command
for all shell instances.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
There is a new init level SMP that was just added, and this module needs
to take it into account.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This reverts commit 8739517107.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
The set of interrupt stacks is now expressed as an array. We
also define the idle threads and their associated stacks this
way. This allows for iteration in cases where we have multiple
CPUs.
There is now a centralized declaration in kernel_internal.h.
On uniprocessor systems, z_interrupt_stacks has one element
and can be used in the same way as _interrupt_stack.
The IRQ stack for CPU 0 is now set in init.c instead of in
arch code.
The extern definition of the main thread stack is now removed,
this doesn't need to be in a header.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is placeholder code; better kernel support for dumping
exception/interrupt related stacks is forthcoming.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The variable needs to be an atomic_t, and in one case it was
being incremented outside of an atomic_inc/atomic_add.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Currently only supports Unix time.
‘get’ subcommand returns date in format “Y-m-d H:M:S”
‘set’ subcommand format is ‘[Y-m-d] <H:M:S>’
The ‘set’ subcommand is implemented with basic date validation.
For user convenience of small adjustments to time the time argument
will accept H:M:S, :M:S or ::S where the missing field(s) will be
filled in by the previous time state.
Signed-off-by: Nick Ward <nix.ward@gmail.com>
The third argument in memmove can possible be greater than remaining
buffer size. Just ensuring that memmove will changes bytes only inside
the string buffer and nothing else.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
A `k_timer` callback is called from the ISR context on certain devices
(nRF), which resulted in an assert in the kernel, as `telnet_send`, and
thus `net_context_send` used a mutex.
Fix the issue by replacing a timer used by the `shell_telnet` module
with a delayed work, which will execute it's callback in a system
workqueue context.
Fixes#22697
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
I think people might be reading differences into 'if' and 'depends on'
that aren't there, like maybe 'if' being needed to "hide" a symbol,
while 'depends on' just adds a dependency.
There are no differences between 'if' and 'depends on'. 'if' is just a
shorthand for 'depends on'. They work the same when it comes to creating
implicit menus too.
The way symbols get "hidden" is through their dependencies not being
satisfied ('if'/'depends on' get copied up as a dependency on the
prompt).
Since 'if' and 'depends on' are the same, an 'if' with just a single
symbol in it can be replaced with a 'depends on'. IMO, it's best to
avoid 'if' there as a style choice too, because it confuses people into
thinking there's deep Kconfig magic going on that requires 'if'.
Going for 'depends on' can also remove some nested 'if's, which
generates nicer symbol information and docs, because nested 'if's really
are so simple/dumb that they just add the dependencies from both 'if's
to all symbols within.
Replace a bunch of single-symbol 'if's with 'depends on' to despam the
Kconfig files a bit and make it clearer how things work. Also do some
other minor related dependency refactoring.
The replacement isn't complete. Will fix up the rest later. Splitting it
a bit to make it more manageable.
(Everything above is true for choices, menus, and comments as well.)
Detected by tweaking the Kconfiglib parsing code. It's impossible to
detect after parsing, because 'if' turns into 'depends on'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The existing stack_analyze APIs had some problems:
1. Not properly namespaced
2. Accepted the stack object as a parameter, yet the stack object
does not contain the necessary information to get the associated
buffer region, the thread object is needed for this
3. Caused a crash on certain platforms that do not allow inspection
of unused stack space for the currently running thread
4. No user mode access
5. Separately passed in thread name
We deprecate these functions and add a new API
k_thread_stack_space_get() which addresses all of these issues.
A helper API log_stack_usage() also added which resembles
STACK_ANALYZE() in functionality.
Fixes: #17852
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Show current power management state in the list of devices, which is
helpful during PM debugging.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far shell transport was initialized early before any k_poll events
and signals. transport_evt_handler() was passed as callback to transport
initializer and could be executed right away. This was true for example
with shell_uart when it enabled interrupts on RX and there were already
some bytes to read. As a result executed transport_evt_handler() is
operating on uninitialized k_poll signals.
Address this race condition by simply initializing shell transport when
everything is ready for processing data, i.e. on the end of shell
instance initialization.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Have SHELL_BACKEND_RTT depend on USE_SEGGER_RTT instead of selecting it,
to fix some selects of USE_SEGGER_RTT with unsatisfied dependencies.
USE_SEGGER_RTT was being forced on without checking HAS_SEGGER_RTT.
This means configuration files now have to enable both USE_SEGGER_RTT
and SHELL_BACKEND_RTT to enable SHELL_BACKEND_RTT. At least
samples/subsys/shell/shell_module/prj_minimal_rtt.conf does.
(The original version of this commit added a dependency on
HAS_SEGGER_RTT to SHELL_BACKEND_RTT instead, but Krzysztof Chruscinski
suggested depending on USE_SEGGER_RTT instead.)
Footnote: 'depends on' conditions get propagated to properties, so this
change is the same as adding '... if USE_SEGGER_RTT' to all properties
(and the prompt).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
RTT_CONSOLE depends on CONSOLE, but SEGGER_SYSTEMVIEW and
SHELL_BACKEND_RTT select RTT_CONSOLE without also selecting CONSOLE.
This leads to a build failure in drivers/console/rtt_console.c (compiled
if RTT_CONSOLE is enabled) unless CONSOLE is enabled some other way.
Symbols like CONFIG_RTT_RETRY_DELAY_MS won't be defined, because they
depend on CONSOLE.
Came up in https://github.com/zephyrproject-rtos/zephyr/pull/21860. This
fix was verified there.
(Would be nice to get rid of some 'select's in the console subsystem at
some point. This is a quick fix.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Size argument must be smaller than strTo buffer size since
strncpy terminates string with NULL.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The current code is assuming that the pointer to the thread structure is
32bit, casting it to u32_t before printing its address. This is wrong on
64bit architectures (CONFIG_64BIT) and the compiler complains.
Fix the problem by using '%p' to print the address.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Change common_beginning_find() to use temp_buffer for storing first
command when algorithm compares commands in search for common
beginning. It is done to support cases where syntax returned by
dynamic commands is transient (e.g. single static buffer is used
for to build syntax).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
User could telnet to zephyr only once and the second connection
was denied. The reason was that the telnet socket was not properly
marked as accepting a new connection.
Fixes#20042
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Unused since commit 08f0d93cbb ("shell: Improve handling of log
messages").
Discovered with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use the int_literal_to_timeout Coccinelle script to convert literal
integer arguments for kernel API timeout parameters to the standard
timeout value representations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
These checks should be against CONFIG_SHELL_LOG_BACKEND,
and not against CONFIG_LOG, since it's possible to enable
logging without building this particular backend.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The $(dt_chosen_label) preprocessor function should be passed
$(DT_CHOSEN_Z_SHELL_UART), not $(UART_SHELL_ON_DEV_NAME).
DT_CHOSEN_Z_SHELL_UART is set right before the Kconfig symbol
definition, to work around the comma in 'zephyr,shell-uart'.
The Kconfig preprocessor functions are defined in
scripts/kconfig/kconfigfunctions.py.
Fixes: #19178
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Convert how we get the various chosen properties like "zephyr,console"
to use the new kconfig functions like dt_chosen_to_label.
Because of how kconfig parses things we define a set of variables of the
form DT_CHOSEN_Z_<PROP> since comma's are parsed as field seperators in
macros.
This conversion allows us to remove code in gen_defines.py for the
following chosen properties:
zephyr,console
zephyr,shell-uart
zephyr,bt-uart
zephyr,uart-pipe
zephyr,bt-mon-uart
zephyr,uart-mcumgr
zephyr,bt-c2h-uart
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
1) Dump time sinse last scheduler call
Could be handy for tickless kernel debug.
Will indicate that no rtc irq is called
2) Dump current timeout of each thread
Could be used to find yout when thread will wake up
3) Dump human friendly thread state
4) Use shell_prin instead shell_fprintf
Signed-off-by: Pavlo Hamov <pavlo_hamov@jabil.com>
With CONFIG_LOG_IMMEDIATE, log output is printed immediately. If a
shell command is in progress, there's no prompt to erase, nor should
we print a new prompt after the log message is output.
Before this patch, a simple shell command like:
int cmd_log_erase(const struct shell *shell, size_t argc, char **argv)
{
LOG_INF("hello world");
return 0;
}
would output something like:
uart:~$ log erase
[00:00:02.623,718] <inf> cmd_log: hello world
uart:~$ loguart:~$
This patch fixes prompt handling while a command is active, and fixes
put_sync_hexdump to behave like put_sync_string.
Signed-off-by: Jim Paris <jim@jtan.com>
move misc/reboot.h to power/reboot.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/stack.h to debug/stack.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move uart.h to drivers/uart.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>