When building Zephyr in the controller-only configuration,
assertions that happen in the Link Layer code are not visible
to the Host which is running on another HCI and connected via
UART or USB to it. This patch allows the Controller code
to output the assertion line number when in such a configuration,
allowing the Host to view the event to help debugging.
The event format used is temporary and will be replaced by a
standardized Vendor Specific specification to come at a later
time.
Change-Id: I013ca6783a3fdedc47b171132919dd4798c66285
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The right convention for help text is tab + 2 spaces.
Change-Id: I2722a8b33f5f74be110dc43fbcecc12841f0db84
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When retrying the request due to a security error that can fail but since
the original buffer was freed in the process the code can no longer verify
if the opcode matches thus it always fails BT_ATT_ERR_UNLIKELY instead of
using the response error, so this not longer cares about the opcode and
just use the response error always.
JIRA: ZEP-1195
Change-Id: I1149b993b97733ab5bb00f347e4f973647e0fdd4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This consolidate code around LE signalling header handling which has been
duplicated in many places.
Change-Id: I0c2cd48c155b751e1bbbd26070965d075cdc2cc5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When a peer controller does not recognize one of the LL control
PDUs received, it will issue an LL_UNKNOWN_RSP PDU to let the
peer know that it does not recognize the request.
The controller now handles this incoming PDU and completes the
procedure by issuing the appropriate HCI event in the case of
an LL_FEATURE_REQ and _RSP pair.
Jira: ZEP-1220
Change-Id: I7c04a346441f04deee41198daa6309c11ae1b571
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
'private' is a C++ reserved word and will lead to compilation errors:
C++ ble.o
In file included from ble.cpp:7:0:
include/bluetooth/bluetooth.h:284:10: error: expected unqualified-id before 'private'
uint8_t private[4];
Change-Id: I36aef5a84af4fc66e1c810bd0c56e5ab5f803294
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In function at_get_number check for the value if gets computed.
If not return error. Also change the end state handling.
Change-Id: I193b04fa2880dfb44e7727b30b67c1ec2e051cc7
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Add an implementation for the bt_storage_clear() API.
Jira: ZEP-181
Change-Id: Iae01c571c161317ea0cc44513d108301c7b5a069
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add basic implementation of an internal storage handler that uses the
local file system. The root directory for all Bluetooth related data
is /bt. Each remote device has its own subdirectory and each key its
own file. This helps keep the implementation very simple, but does
come with the meta-data overhead for each file.
As an example, the value of a key 0x0001 for a device with a static
random address cc:11:22:33:44:55 would be stored in the following
file: /bt/cc11223344551/0001. Local values such as the identity
address are stored directly under /bt with a file name that matches
the key the same way as remote-device files.
For full functionality the implementation requires a file system that
can support file/directory names of up to 13 characters in length. If
the file system supports less than that (as is the case with FAT12)
then only local values can be stored (in /bt/abcd). Local values
include the identity address as well as the local IRK.
Jira: ZEP-181
Change-Id: I7dc696af6353a154cb00dcd01a5f4ac3d7127e6b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is not needed for Zephyr controller build and should already
be fixed in Mynewt.
Change-Id: I39e81dc3e9b5fd5a3f5f823465527248625caf26
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Patch 8c118f8673 causes the wrong semaphore
to checked so receiving credits are never restored which caused the
channel to get stuck after all the credits are consumed.
JIRA: ZEP-1199
Change-Id: I9cd5474b3bcaafcb19d15613939ce30d07befe0a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove hardcoded use of crystal as 32KHz clock source and
20 ppm accuracy; and use the values from config for sleep
clock source and sleep clock accuracy value in Bluetooth
Controller.
Change-id: I1c0d53ecf8ad158153d5186a6680b5eb03d1641b
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Making a reference to the common work queue code should not necessarily
drag in the system workqueue, since it is possible to use a workqueue
that is not the system workqueue. This is done by moving the system
workqueue into its own code module.
Moving the system workqueue to its own code module allows removing the
NANO_WORKQUEUE and SYSTEM_WORKQUEUE kconfig options, and compiling the
common workqueue code and system workqueue all the time. They are only
linked in the final image if a reference to them exist, same as the
other kernel modules.
Change-Id: I6f48d2542bda24f4702e7c2e317818dd082b3c11
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Provide more detailed information about the controller address and
version upon init when debug is enabled.
Change-Id: I5fe9c7c91f95928cb3cc64b801137bb1466e4115
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
During implementation of alternate encryption procedure
usable in nRF51, commited in
c41d3edda8, re-encryption
procedure was broken. This commit fixes the issue, and
now re-encryption should work on both nRF51 and nRF52.
Change-id: Ia41200f42b1d46e1f3f35ff44b582d4ffcc5f4fa
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
So that application could check data pointer to see if any
data have been received and if read operation is complete.
Change-Id: I36c3ff81baefbc535374d937e5297938445eafa6
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This makes use of the same code used by LE to print the state transitions.
Change-Id: I90a04f3c3f426fde1e0987acb572f7371c483c1c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a common function to log state transitions including the caller
function and line in case something goes wrong:
[bt] [DBG] bt_l2cap_chan_disconnect: (0x0011b14c) chan 0x001199c0 scid 0x0040 dcid 0x0040
[bt] [DBG] bt_l2cap_chan_set_state_debug: (0x0011b14c) chan 0x001199c0 psm 0x0080 connect -> disconnect
[bt] [WRN] bt_l2cap_chan_set_state_debug: bt_l2cap_chan_disconnect()1562: invalid transition
Change-Id: I246a9004a04d93a38b8c7f7633705f6c191698b2
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Channel state shall be updated properly otherwise it may cause unexpected
errors.
Change-Id: Ifd54d6bd3c5b44a40c315fd8a2946b30168aa65f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This defines and clarifies PF bit macro for both UIH and
non UIH packets.
Change-Id: Ide7736c0fc8607708824766adbfccf1bd7bc48e9
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Security will be elevated based on the DLC required level
during connection.
Change-Id: I0b63885582f34a5689f7bc8081c1f9f011b2325f
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Initialize the variable to zero before computing.
Change-Id: Iccdf77a085667728dbb68779f001c8d940a7a89d
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
This is necessary in order to properly handle security errors which are
part of the testing specification thus can influence qualification.
Change-Id: If444e753be9196f3d5bb36cea00e332a33aa249f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is to avoid code duplication while implementing outgoing
connection.
Change-Id: I52f882b7be9180f29def59c8ac3ef0a4798b719d
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This is to avoid code duplication while implementing outgoing
connection.
This also moves setting initiator flag while allocating, than
doing it when SABM is received.
Change-Id: I8e811c995bf0eaa0bd24715e2e96d8a578a79c5d
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This replaces initiator flag of session and dlc to enum which has
two values INITIATOR and ACCEPTOR.
Also this defines macros for CRs in header. Basically there are
three types fo CRs. Frame header CR has different meaning for
UIH and non UIH packets. Also this renames the existing msg hdr
CR to make it consistent.
These changes are basically done to make it more readable
Change-Id: Ic15e93465b0afbd19d8805f27d7a43f34ef38689
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Move controller code from drivers/controller to
subsys/bluetooth/controller.
Change-Id: I73f675188485aa3267507bad7647796e593a3da0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move the Bluetooth host stack from net/bluetooth to
subsys/bluetooth/host. This is preparation for having both host and
controller under the same root, i.e. subsys/bluetooth/.
Change-Id: I3bc796f7e331fca0c485f3890d62b9c03e027b96
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
