Currently Zephyr is running from RAM, and the space where
instructions can be executed from is quite small.once Flash
cache is enabled in ESP32 port we can remove this check.
Signed-off-by: Nishikant Nayak <nishikantax.nayak@intel.com>
Implement API to validate user buffer. This API will iterate
all MPU regions to check if the given buffer is user accessible
or not. For #3832.
Signed-off-by: Chunlin Han <chunlin.han@linaro.org>
The PREBUILT_HOST_TOOLS variable was used during the CMake migration
but is no longer documented or needed. As the docs demonstrate, adding
tools to path is an easy way to find prebuilt host tools.
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Having two implementations of the same thing is bad,
especially when one can just call the other inline version.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
As per https://tools.ietf.org/html/rfc7230#section-3.3.2:
"A sender MUST NOT send a Content-Length header field in any
message that contains a Transfer-Encoding header field."
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Delete the native UART JTAG driver as we will be reusing
the Altera's HAL driver.
Add the shim driver support for Altera HAL's JTAG UART soft IP.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Delete the native timer soft IP driver as we will be reusing
the Altera's HAL drivers for most of the soft IP's.
Add shim driver support for Altera timer system clock soft IP.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add the basic infrastructure like driver <-> IRQ mapping table
and ZEPHYR_RTOS compile time flag which are neccessary to make
use the HAL drivers from Zephyr shim drivers.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add the Altera HAL sources from Altera Quartus Lite SDK
to Zephyr OS under 'ext/hal/altera' folder.
Origin: Altera Quartus Prime Lite SDK
URL: http://dl.altera.com/?edition=lite
Version: v17.0
Purpose: Provides HAL support to Altera's soft IP's
Maintained-by: External
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
When resetting there is no point trying to start clearing the
Friendship since there will not be any security material left to send
out PDUs.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The common interpretation (among other implementations) seems to be
that Model Publication for a given AppKey Index implies a binding for
that AppKey. This isn't currently explicitly stated in the spec, but
in order to improve interoperability go with this interpretation as
well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The variable for tracking that a buffer from the Friend Queue hasn't
been sent yet was not being properly set.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If net_context_recv() returns a error, net pkt will not be released. For
example, net_context_recv() returns -EBADF because the TCP connection is
closed by the peer.
Handle the return value instead of using SET_ERRNO().
Signed-off-by: Aska Wu <aska.wu@linaro.org>
If we cannot send a DHCP message, then unref the net_pkt
in order to avoid a buffer leak. Earlier we tried to
unref NULL net_pkt which is not correct.
Signed-off-by: june li <junelizh@foxmail.com>
patch removes the mem.h and marcos used in that file are
moved appropriate board files. As there are boards with
different flash configuration but of same soc, flash and
ram size are moved to dts file instead of dtsi
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
This simplifies the API since there is no-longer a need to pass a huge
number of function arguments around.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This simplifies the API since there is no-longer a need to pass a huge
number of function arguments around.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a command for getting and setting the model publication. We also
have to adjust the app's configuration, since both the Model
Publication Set and Status messages are segmented messages, meaning we
need two TX and RX segment contexts.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The value 0xffff is reserved, so we can use that to indicate whether
there's a vendor model in question or not. Simplifies things over the
previously used separate boolean value.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For an unknown reason, various samples in KBuild were including
Makefile.test, this had some desired benefits, one of which is that
the popular BOOT_BANNER appears. The CMake-equivalent of including
Makefile.test is setting the flag IS_TEST. This commit reverts the
behaviour of the samples back to how it was pre-cmake.
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
The Kbuild equivalent of IS_TEST was used for hello_world before, so
we revert back to the old behaviour. This resolves
https://github.com/zephyrproject-rtos/zephyr/issues/4904
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
CONFIG_NET_L2_BT_ZEP1656 should only be used with older Linux up to
4.11 which by now should have been updated in all distros.
For those sticking with older distros should select it manually as
it does breaks IID address it should never be used in production.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Token is missing when we jump to the error and token is not yet setup.
To correct it, we grab the token from the input packet at the beginning
of the handle_request()
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
There were some needed changes missing after the update to have manual
control of PB-ADV & PB-GATT provisioning bearers. E.g. the test for
CONFIG_BT_MESH_LOW_POWER in net.c was no-longer indicative of scanning
being on or not.
Do the scan enabling selection within the LPN module if LPN is
supported, or otherwise enable scanning unconditionally in
bt_mesh_provision().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is a temporary hack until #5006 is resolved (possibly using
https://github.com/zephyrproject-rtos/zephyr/issues/5006
Unit testing (BOARD == unit_testing) doesn't need the system call
definitions. Because we foward declare with __syscall them as "static
inline" (from common.h), the compilers will complain that the
definition is missing.
Change to only define __syscall as "static inline" if we are not
builing a unit test to avoid said warnings.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The '=' character was incorrectly getting passed to the JLinkGDBServer
device argument, and caused the server to fail to connect to the target.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Semaphore state_sem initial count is set to 0 but k_sem_give()
is invoked first in sys_rand32_get() which will block the caller
forever.
Fix the issue by setting the initail count to count_limit.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Note we've added a new Sphinx inline role for references to GitHub
issues, `1234` (along with the existing inline role for Jira
issues :jira:`ZEP-1234`)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The Doxygen comments for the flash API refer to page and sector
interchangeably, without defining either. Fix the coments by providing
a definition of page and using that word consistently.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Rename the Atmel SAM I2C driver based on TWIHS module to match the
convention:
<driver class>_<SoC family>_<hardware module used by the driver>
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Various minor changes to the Atmel SAM (TWIHS) driver
- clean up variable names, comments
- refactor i2c_clk_set function
- do not save configuration in dev_data
- improve ISR NACK handling
- print "Device initialized" string
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
olimexino_stm32 was not getting the flash base address from the Kconfig
variable. Since the board uses DTS that will get set, so we can use the
standard openocd.board.cmake.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Unlike other NXP SoCs currently in Zephyr, the mimxrt1052 has the ARM
MPU rather than the NXP MPU. Start out by enabling it with a simple set
of memory regions for "flash" (ITCM), "ram" (DTCM), and the peripheral
buses. More regions will need to be added when we implement support for
external memories.
Tested with:
- samples/mpu/mpu_stack_guard_test
- tests/kernel/mem_protect/protection
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
