This will replace the current goal of 'make qemu' with 'make run' and
moves Qemu handling into its own file and into the boards instead of
being architecture specific.
We should be able to add new boards that support some other type of
emulation (by adding scripts/Makefile.<emu type>) and allow the board to
define their own options for the use type of emulation.
'make qemu' will still work, however it will be deprecated, starting
with this commit it is recommended to use 'make run'.
Jira: ZEP-359
Change-Id: I1cacd56b4ec09421a58cf5d010e22e9035214df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
RAM size has increased on arduino_101_ble which causes it to no longer
be able to build test_controller_dbg.
Change-Id: Iab8ed2857db23d048cfa6b04e2d1fea31efbb13c
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Disk IO functions are used by both FS and USB Mass Storage.
This patch refactors those from FS directory to a separate one.
In addition existing, config options were modified to make
stuff meaningful.
Jira: ZEP-1276
Change-Id: Ia2a2e18f3dbbbdb964c3dc0427d8138ad86134cd
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Add Kconfig configuration and conditional compilation of
RSSI measurement during a connection.
Change-id: I5a2f23f76a7cbbd9569d53d31899a472bf39d3ee
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig configuration to conditionally enable Data
Length Update procedure support in the Controller.
This will save CPU time, flash and RAM, if this feature is
not desired.
Change-id: I4515c0c7cf9aeb333a289397ae3c9bac04a08e4e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig configuration to conditionally enable LE Ping
feature in the Controller.
This will save CPU time, flash and RAM, if this feature is
not desired.
Change-id: I5fbbdbe8f45ac01c9b0d7b11e002a0d1db4d272e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add a test configuration to build a controller that
supports only Bluetooth v4.0 features.
This is copy of prj_controller.conf, but Kconfig defines
will be added in subsequent commits to conditionally
compile out feature not in Bluetooth v4.0 specification.
Also, added nrf52840_pca10056 and arduino_101_ble board
builds be tested.
Change-id: I36891bfc54cc36a8588c9b019de582e3193e8aa3
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
This helps simplify code that was previously combining net_buf_add()
with memcpy().
Change-Id: If44cf9cd651aba5e544e36567869f147468663eb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To customise test builds and support test related features such as time
stamps and a boot banner, introduce a Makefile variant that is dedicated
to testing.
Initially we introduce a new config overlay that is used for all tests, in
this case we enable BOOT_BANNER and BUILD_TIMESTAMP. This will print the
current version and the date, useful when reporting bugs and also an
indicator that the system has booted before the test has started.
For example:
[QEMU] CPU: qemu32
***** BOOTING ZEPHYR OS v1.6.99 - BUILD: Dec 21 2016 19:57:13 *****
tc_start() - Test Nanokernel CPU and thread routines
Initializing nanokernel objects
...
..
Change-Id: I224318cdeb55a301964ea366dbc577e2e3a09175
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This moves the shell component into its own subsys and groups all
related files and options into a single place.
Additionally, one Kconfig option will now be required to enable the
shell:
CONFIG_CONSOLE_SHELL=y
The header files was also moved to include/shell/shell.h and can be now
referenced with
#include <shell/shell.h>
instead of
#include <misc/shell.h>
Updated documentation as well.
Change-Id: Iffbba4acfa05408055e9fd28dffa213451351f94
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This allows to specify length of discovery from command line.
Change-Id: I3ad80e74b5cdc263e549ce309b75c1f5c117b653
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There are static initializer macros available for most kernel objects
which we should use whenever possible.
Change-Id: I496f4d05d26801eddd21fae53bdd4fcdc3246fe3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Moved all libc Kconfigs to where the code is and remove the default
Kconfig for selecting the minimal libc. Minimal libc is now the default
if nothing else is configured in.
Removed the options for extended libc, this obviously was restricting
features in the minimal libc without a good reason, most of the
functions are available directly when using newlib, so there is no
reason why we need to restrict those in minimal libc.
Jira: ZEP-1440
Change-Id: If0a3adf4314e2ebdf0e139dee3eb4f47ce07aa89
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to keep the initialization process light-weight, remove
net_buf_pool_init() and instead perform the initialization of the pool
and buffers in a "lazy" manner. This means storing more information
in the pool, and removing any 'const' members from net_buf. Since
there are no more const members in net_buf the buffer array can be
declared with __noinit, which further reduces initialization overhead.
Change-Id: Ia126af101c2727c130651b697dcba99d159a1c76
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove CONFIG_TEST_RANDOM_GENERATOR from each test and sample where it
is not required.
Change-Id: I949f8e93c2cb1881622a5e48efeb87c43122a170
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Until now it has been necessary to separately define a k_fifo and
an array of buffers when creating net_buf pools. This has been a bit
of an inconvenience as well as blurred the line of what exactly
constitutes the "pool".
This patch removes the NET_BUF_POOL() macro and replaces it with a
NET_BUF_POOL_DEFINE() macro that internally expands into the buffer
array and new net_buf_pool struct with a given name:
NET_BUF_POOL_DEFINE(pool_name, ...);
Having a dedicated context struct for the pool has the added benefit
that we can start moving there net_buf members that have the same
value for all buffers from the same pool. The first such member that
gets moved is the destroy callback, thus shrinking net_buf by four
bytes. Another potential candidate is the user_data_size, however
right not that's left out since it would just leave 2 bytes of padding
in net_buf (i.e. not influence its size). Another common value is
buf->size, however that one is also used by net_buf_simple and can
therefore not be moved.
This patch also splits getting buffers from a FIFO and allocating a
new buffer from a pool into two separate APIs: net_buf_get and
net_buf_alloc, thus simplifying the APIs and their usage. There is no
separate 'reserve_head' parameter anymore when allocating, rather the
user is expected to call net_buf_reserve() afterwards if something
else than 0 headroom is desired.
Change-Id: Id91b1e5c2be2deb1274dde47f5edebfe29af383a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is used to disconnect a dlc.
Syntax:
>br-rfcomm-disconnect
Change-Id: I8f345d9fbb1f1f84bfb1f697322d9a87ff531797
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
There's now snprintk available that's more light-weight on the stack
than snprintf.
Change-Id: I6b3e4409703ca92fe6b8f4146ff47c490ab826cb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Those tests are now build with unified kernel.
Change-Id: Idbc42bb77060cea0130d62cccdf2e40aeee89128
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Switch left-over usage of TICKS_NONE and TICKS_UNLIMITED to the new
unified kernel counterparts K_NO_WAIT and K_FOREVER.
Change-Id: I2f2a16360e816f9f8791eb216deb3c70b8cc87df
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert fiber_start to k_thread_spawn and nano_fiber_fifo_put to
k_fifo_put.
Change-Id: If1ec405ec602e28a538f4c9569ede87519346559
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use defines from k_fifo intead of legacy API.
Change-Id: Ib8cf0d88240ef145da550b8cf83d2580e7140521
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use new sleep API or remove sleeps where not needed.
Change-Id: I88c0973e57eb4970b68b3f4fa428683191b1a7f0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This can be used to initiate an outgoing connection
Syntax:
>br-rfcomm-connect <channel>
Change-Id: I7ac7aeb61e7ae7e3f55c7cd7e815bdb604b27fb3
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Restructure the Bluetooth options more logically.
- Both host and controller are now behind the same high level
CONFIG_BLUETOOTH.
- Selecting controller support disables other HCI driver selection, so
the controller isn't in the same list as HCI drivers any more.
- Under the top-level there's a "Custom stack" option, which when
enabled opens up the option of choosing CONFIG_NBLE.
There are various other cleanups and simplifications in this patch as
well, since splitting these up would have been fairly tricky while
making sure all test cases still build.
Change-Id: I5bb715cb9d20201cb8b72fbd149c8a09a4b2d7d2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add an Arduino 101-specific configuration that enables flash-based
storage support as well as the file system shell.
Change-Id: Ic10ea958dd2446df4942a8dfd3cce1e3368852b2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Implement a new "clear" command to exercise the bt_storage API. The
command can either take an address parameter to clear storage for a
specific device, or, if called with the parameter "all", to clear the
entire storage.
Jira: ZEP-181
Change-Id: I1ebd17033f2062951abeeb7d7c448a34a3672577
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This increases number of available L2CAP channels for the test purposes.
This is needed for TC_COS_CFC_BV_05_C test case.
Change-Id: I5df099fb64632e1a0e557852ca55ee45a9cc89ed
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This fixes configuration file name in testcase.ini file.
Change-Id: I6496f98694415bfc3a76308aa9ee6dfd008e1691
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This updates README as well as makefile to choose Zephyr BLE firmware
configuration as a default one.
Closes: ZEP-1187
Change-Id: I78dec2a4e2b5bfe634a8b7b8897d4f6ab6b37b44
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds sample configuration file for tester application that
supports controllers with Zephyr-based BLE firmware.
Change-Id: I8b63f93d1395837b8485aba7060b6626be1daab1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The README files provided with the samples contain references to NBLE,
which is not a publicly supported solution for Bluetooth. Simply
remove these files. If the need arises to provide application-specific
information in the future we can add back per-application README
files.
Jira: ZEP-1183
Change-Id: I81b3ea5491d50fb16062ccd5a421ddc8fcb7ea42
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Ability to use Zephyr shell by multiple modules simultaneously, each
module for its own usage.
Old shell implementation enabled the user to call only one module
commands, not all of the modules simultaneously.
Change-Id: I0ef8fa2fd190b7490c44fe91d1016363258302c9
Signed-off-by: Yael Avramovich <yael.avramovich@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds support for setting the minimun required security level to
l2cap_register command:
l2cap-register <psm> [sec_level]
Note that entering the security level is optional and the default is
BT_SECURITY_LOW(1).
Change-Id: Ib6dea92919357f41fe2f4de3050b9a10a7f553d6
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This header file is not intended for applications, rather than for
drivers, so move it to the appropriate place.
Change-Id: I7ff8158418e7e839b538c6cccbb32f3af43c12c6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These options were only needed for a MyNewt-based nRF51 firmware on
these boards (the MyNewt BLE stack is called Nimble, hence the
prj_nimble.conf sample config files). With a Zephyr-based nRF51
firmware these options are no-longer needed, so it's not appropriate
to have them default to enabled. Instead, if they are needed, require
the app-specific configuration to enable them.
Change-Id: Iefbee4d97590af4e11bcedea05fe61f32a147b83
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The combined controller & host build takes up too much RAM for the
16kB arduino_101_ble target, so limit it to the 32kB nRF52 & nRF51
DevKits.
Change-Id: Ib9d04765697b7f5c748633cb6244474d92f96995
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes all Bluetooth samples and tests being build with unified
kernel. main() is now executed from init thread and specifying task
for it in mdef file is no longer needed. By default main stack is
1024 bytes and this should be enough for BT samples.
Change-Id: I6674eea2c028b78ada5190acef72937186738af2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The bt_driver API was created when Zephyr only had a Bluetooth host
stack, but no controller-side functionality. The only "driver" that
was needed for the host was the HCI driver, and hence "HCI" was
omitted from the name.
With support both for host and controller Zephyr will be getting more
Bluetooth driver types, in particular radio drivers. To prepare for
this, move all HCI drivers to drivers/bluetooth/hci/ and rename the
bt_driver API bt_hci_driver.
Change-Id: I82829da80aa61f26c2bb2005380f1e88d069ac7d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
CONFIG_ARC_INIT defaults to 'n' now days so there's no reason to try
to explicitly disable it in the sample config files.
Change-Id: I88df06ba23bdac697f0767384f7b88e3bd9fced9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This change shortens the Service Class macro name from
BT_SDP_*_SVCLASS_ID to BT_SDP_*_SVCLASS
Change-Id: I1150baae24428c6b76f005d11003291016e0a03e
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
This change adds SPP as a sample SDP service during RFCOMM
server registration. The SPP channel is now used as the
fixed channel for RFCOMM register command.
Change-Id: I3b5ad3995725adca55db1497d4a35099f6311f3b
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
This way the application can reuse the same callback for multiple CCC
since it can track what CCC is affect by checking the attribute pointer.
Change-Id: I608da643aea07de26b65d67e6db3268d717d0f53
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This testcase was being ran on Quark D2000 because it failed to
identify itself as micro. There is not enough RAM for that.
Properly tag.
Change-Id: I9fd4235f4436b914b89b10616cbed0cfb3e97b40
Jira: ZEP-1014
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Some of tests/bluetooth test are failing link step only when debug
is enabled, these filters prevent those tests from being executed
under such configuration.
Jira: ZEP-1063
Change-Id: I87fa73710d78346b1b2ce587e9055b0732d9cb49
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Clean up left-overs from this getting fixed first in master.
Change-Id: Ief41ecfdeeb51fbc76f2fe045a412ff1643f69c9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This implements GAP Unpair command handler used to remove pairing
information.
Change-Id: Ia2e2400ea06b2b904f89ec3ee88527d1ea8f7f38
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This event will be used to inform tester about PTS identity address.
Change-Id: I3d25c69c3fc9a8d8a728497d1dc1d57084373e97
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This moves discovery logic to the tester application.
BTP Start Discovery command flags have been extended with
"Use observation procedure" bit.
For now, Tester can search for devices in limited/general discoverable
mode or those that are broadcasters by setting corresponding flag bits.
Change-Id: I7142e8fdf40a9081787538e433067335d3ee0564
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This test build where BR/EDR SMP support is enabled without
LE central or singing support.
Change-Id: I61bc17e989a5752500a7d29557609d9e54b6006d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
No other board has BR/EDR support at the moment, and we're too easily
hitting RAM limits on them.
Change-Id: I81c800f979d34bd58f73a34c1038a9327556adb2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This ensures ADVTP patches are build tested with debug enabled.
Change-Id: I5c09afea4a9df84b054d2383f0b53ff85fa5dcd5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This board was recently renamed, but apparently this reference was
left out.
Change-Id: I9789fa45eab6a9b3118f0f0857ef2207311597f3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This fixes data passed to the BTP Device Found event.
Change-Id: I1ab465b87ce24f3ea10b7217c254aafaee494c91
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This makes sure A2DP support is build tested on each patch.
Change-Id: I9dba5c20d44d8ac92910e80c1ad97ac8d2207652
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure AVDTP support is build tested on each patch.
Change-Id: Ia7cf94ca84fa01bd676a99b0df58ac745bbfc8c7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure RFCOMM support is build tested on each patch.
Change-Id: I9cd60da1b0ab0db2b41487393fb59fe1b415ea01
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This board is not being used or tested and does not actually
run on any hardware, remove it in favor of well supported boards
for this CPU.
Jira: ZEP-850
Change-Id: I01c825c7eb44d6c321f2ffb88e8899da528921dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board is not being used or tested and does not actually
run on any hardware, remove it in favor of well supported boards
for this CPU.
Jira: ZEP-850
Change-Id: Ied681b6059ad74f9d019054292c919a9f938e7d3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added filter options to avoid building for the Arduino_101
and Quark_se ARC core as there is not enough RAM to run this
test.
Change-Id: I0c1172714c9827e632648fcedc67555251f25769
Signed-off-by: Itankar, Piyush T <piyush.t.itankar@intel.com>
Adds support for handling L2CAP send data command.
Change-Id: I120a9ed56506ce205e32c5efe15c5d967d7726b6
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for handling L2CAP listen command.
Change-Id: I2c9c27f925c923a14ddb28b41fbefd612b32d63a
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for handling L2CAP disconnect command.
Change-Id: If6f8f3a7485dc8ae270481ed6af4f0a4d4c69fac
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for handling L2CAP connect command.
Change-Id: I95d27831f65ed6a3e02e1d6e7583baa6890b588c
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds method which initialize data pool for L2CAP data.
Change-Id: I2b170489aa4b2afc3c1f962591f377e23d147161
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds commands to the Bluetooth Testing Protocol for L2CAP.
Change-Id: Ie9ea180c4db62c238ce1450e5714ffd7b0ca2f5f
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Remove BT_RFCOMM_SEND_RESERVE usage since it will be removed
eventually.
Change-Id: Iada20cf0692ae12996e7ed820601bb77fe47d438
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Sets new command in BT shell app to send data to peer
Syntax:
>br-rfcomm-send <number of packets>
Change-Id: Ic795d007a03f657afb833719ae0e800ca0ac6e0b
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This adds queueing support for requests that requires a response making
it simpler to use the API. The storage is keep in the parameters of the
request so it is up to the application to define how many can be queued
but in case the application don't want a request to block waiting for
a buffer it can use BLUETOOTH_ATT_REQ_COUNT to control the available
buffers which is recommended in case the requests will be sent from the
RX fiber.
Change-Id: I407c3982a7ecdc4a9eff7172d9d0addd46949783
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
prj.conf is for single mode LE controllers.
Change-Id: I138a560f4e33f6663135bbcbb4d8aeb5955342a1
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
BR/EDR support in chip is mandatory if BR/EDR is enabled so add
separate config for it. This is to avoid problems when using
single mode LE controller.
Change-Id: I9d9692b89883dd1980803d66818fb6e3a368afb0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Sets new command in BT shell app to allow register one RFCOMM server.
Syntax:
>br-rfcomm-register <Channel>
It also accept the connection from remote and provides dlc object
Change-Id: I99f672ee68785338f3bf22948d4f33b3e1aecd2e
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This sets BR/EDR name with same value used over LE.
Change-Id: I29407b0b44907b520b0f39afe868fc612c5e47d4
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Bluetooth tester is now using new system log macros.
JIRA: ZEP-311
Change-Id: I6398f2de12d5ba1073e40fd45aa8e0177d1e279d
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
This adds device address to the controller_info data. This address
may be used then by PTS for establishing connection etc.
Change-Id: Ic2319c452d94ac79376659ba37b4c9d812ccf9ae
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
If CONFIG_BLUETOOTH_PRIVACY is set in Kconfig, current settings
shall indicate it's usage.
Change-Id: I0645aedf1b774617c9d97cec0070908aef919ca7
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
Based on BTP specification following GAP_SETTINGS_* flags were added:
GAP_SETTINGS_CONTROLLER_CONFIG,
GAP_SETTINGS_STATIC_ADDRESS
Change-Id: Ic87d13772c0ef9c9bc8bba331c8bc9f3ffc93f87
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
When tester application has been initialized, send this event
to indicate that Upper Tester can send first BTP command.
Change-Id: Id3f4dd246c4e67982057f9518b4b0036e79a6a01
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
Before sending any command, the tester shall wait for this event
indicating that IUT is ready to accept first BTP command.
This is needed, because some devices need more time to initialize
their stacks, so that the first BTP command can be lost.
Change-Id: I92d1c6ea8be905734037eb29f7f270a70ab1583e
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
Depending on advertising options this can be non-connectable address.
NFC pairing application document also allows broadcaster/observer
roles.
Change-Id: I9b104ac8fb9752a083a7a31fc20598c66f23f608
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to query LE and BR/EDR OOB data.
Change-Id: I8bc281a9549092c1c4b40c346580abb5fd51d02d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This lets the callback take advantage of the powerful net_buf API for
parsing the advertising data content.
Change-Id: Id65e6e83efd60c0f36c47bc5446a2e8ec2833d7c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes bt_gatt_write consistent with the rest of the API where the
parameters are passed back to its callback.
Change-Id: Ie94208aa661d3620d0cbc5be4a4fb5b3c3ef061c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This can be used to test if receiving and sending simultaneously is
working properly with tools such as BlueZ's l2test.
Change-Id: Ic6bcd00a4e1448bebd3ae74bcc58986872332bbe
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The 16550 will now be the default console device.
Change-Id: I92a6b49984b055e7d5f5c97e5192150be0d5c5c7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds reading of included service attribute 128bit UUID.
The limitation of this solution is that if several attr handle-range
pairs will be received, this will read first attribute UUID and then
start discovery from the the succeeding handle.
ZEP-373
Discovery related test results:
2/76 GATT TC_GAD_CL_BV_02_C PASS
3/76 GATT TC_GAD_CL_BV_03_C PASS
4/76 GATT TC_GAD_CL_BV_04_C PASS
5/76 GATT TC_GAD_CL_BV_05_C PASS
6/76 GATT TC_GAD_CL_BV_06_C PASS
Change-Id: I27185b3a3ae96c9c03b0f356492df18ba83b183a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Buffers pool has to be increased for all configurations.
Change-Id: Id24caced5043c1672ca5f753d1e86d9a72c728ea
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
TP/GAW/SR/BV-10-C test case requires two long values to perform
nested prepare write operation. Using one ATT Execute Write command
this two values are going to be written simultaneously.
Change-Id: I2950409ed8f1d121dcc706b432cdf071b9af00c0
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This driver does not yet support interrupt-driven console.
Revert when ZEP-280 is implemented.
Change-Id: Ib430c39138194ab441c95a1b1856c3661102a625
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
$srctree for the application might not be set to be $ZEPHYR_BASE, use
$ZEPHYR_BASE instead to be more explicit in the build.
Change-Id: Iefa5ff59f246b584949329044f7a6531adc6ed62
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds flags parameter to write callback which can be used to indicate
that data only need to be prepared with use of BT_GATT_WRITE_FLAG_PREPARE
fixing qualification tests that needs to check authorization or other
errors that cannot be verified with just the permissions.
Change-Id: I3d662b2027718ffb52a280e3bbc9750be14f89ae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BT_GATT_INCLUDE_SERVICE user_data shall point to the service declaration
of service to be included. So user_data_len shall be set to 0 to avoid
copying the contents of bt_gatt_attr to the server_buf, and just use
pointer to the actual attribute.
Change-Id: Id770daeb6d64644c51f2bc5d3962dd80363ec8c3
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Add HRS simulation to shell allowing to switch on / off HRS simulation
helping testing GATT notifications.
Change-Id: Idf99b74ac73d45d2f0d3279d50431be4027fef8a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
attr pointer is local here, so it may be overwritten anytime, because
this attribute user_data will be used out of scobe of this function.
Change-Id: I85b390299980dac213d8ce1939078fe8b242c887
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Adds to BR/EDR L2CAP client channel object required handlers and allocate
room for channel data traffic to make it operational when fully
setup and to be interactive with internal stack.
Change-Id: Id1e90d7ea318ed8a875383995e4d175e124939eb
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Interrupt-driving UART not implemented yet for this driver.
Change-Id: Ida60d7e09e9eca2d7e6452a84f6d95529d0af9b6
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fixes wrong server instance used during printing details on registration
PSM server.
Change-Id: I269d20bf4d12f24ce143a04c1c23ed8711b9cdba
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
There is no need for any prepare write variables as this is now handled
transparently by the stack and so any errors that happens during write
shall be reported in the return.
Change-Id: I3e629016cb7f5f6cd9106ff07c3cbb464e81734f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The parameter is already inside a struct that's specific to BR/EDR
discovery, so there's no need to repeat "discovery" in its name.
Change-Id: Idb95788bfc9d62ecd52adecc35104e212724cb78
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since we only have a single user we can enforce length > 0x01. We
should also ensure that the results count is 1-255.
Change-Id: Id5d91acae06c6c6fc66dd59c0e367682a98dc08c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add more specifications or qualify some to the sanity check test cases
for them to be ran in real hardware:
- kernel types (micro vs nano)
- platforms / arches to exclude / include
- one that is removed (for the PCI sample) as it cannot be ran
without extra information
Change-Id: Id14dc15eb89358c3656d2814ea41bb6fec051278
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Refactors L2CAP core data structures and modifies functions that uses them.
Now we can have separate L2CAP feature channel objects for LE and BR/EDR
transport. This's also a ground for make L2CAP CoC API to be common
for both transports.
Change-Id: Ic1197b0e3c4f505764b23fb9c7eb27123a44a675
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Buffers pass to BT stack need to have minimum BT_BUF_USER_DATA_MIN
of reserved user space data.
Change-Id: Iaeb85faa20b1c5281bfd0331336295ad7cfdd68e
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
It is no longer necessary to implement flush callback for long
descriptors since the stack can queue prepare writes this callback
will never be called which makes BT_GATT_LONG_DESCRIPTOR obsolete
as well.
Change-Id: Idca31ba8e4404d2acba760c420394d5adee0a508
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is similar to previous patch which makes the API much more simple
when handling long writes.
Change-Id: Ibd3856863a43927195e23936872a160d5ff94648
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a buffer for incoming prepare writes which can be
tunned using BLUETOOTH_ATT_PREPARE_COUNT, these buffers are then used in
execute write to commit the data thus making flush callback obsolete:
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x16 len 50
[bt] [DBG] att_prepare_write_req: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] prep_write_cb: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x16 len 34
[bt] [DBG] att_prepare_write_req: (0x001159c0)handle 0x0022 offset 45
[bt] [DBG] prep_write_cb: (0x001159c0)handle 0x0022 offset 45
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x18 len 2
[bt] [DBG] att_exec_write_req: (0x001159c0)flags 0x01
[bt] [DBG] write_cb: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] write_cb: (0x001159c0)handle 0x0022 offset 45
Change-Id: Iae071d7b4b5b042285952da57e3f7a853cf58afb
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use the more explicit net_buf_get_timeout() call where it makes sense
(e.g. where we always want to wait or never want to wait).
Change-Id: Id1eabe0ad2f9fa79f7be39e51fefa5161f9cc550
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This add CONFIG_BLUETOOTH_DEBUG_LOG which depends on SYS_LOG since the
later can actually use either CONFIG_PRINTK or CONFIG_STDOUT_CONSOLE.
Change-Id: Ib2974d1331f6c91d119a218ec95e8bf01069377b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allows to set custom ID address from shell app.
Change-Id: I293800f116a7e56e183720a9b908ccb0e9622c12
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Disabled bluetooth test for STM32F103RB SOC because there is not
enough RAM space for the test.
Change-Id: I9f097d9201ed659c4970b67f42c570331b92bad8
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Return correct errors for long write.
Change-Id: Idfd54d961db9b2023d05a0dcfa7082d63e9c0261
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This fixes invalid cast from struct bt_gatt_attr to bt_gatt_chrc.
Change-Id: Idc2c016e26b5d38d2d4772a7bd79af8357a4da58
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This allows to use LE SC with nimble firmware running on Arduino 101
board.
Change-Id: I3a9a485dc87c367160da98010d0189dfef09d5de
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Adding test service makes possible to test Bluetooth PTS test cases
with the shell. Currently long and auth characteristic.
Change-Id: I153efd3f7fa266f93873ef978025faf72c664076
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Returned by flush_value function value should be length of data which
are previously prepared by prepare write requests.
Change-Id: Iacfc63527c68cf20a76a4587acc749bd2d00cffd
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This enable checking for errors and automatically print help string:
btshell> connect
connect <address: XX:XX:XX:XX:XX:XX> <address type: (public)>
Change-Id: Ie097ecddb72ab15bf6192e310d0bd839bfd251d5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch fixes returning invalid offset, invalid attribute length
error. Error should be set during prepare write and returned in
response to execute write request as error response.
Change-Id: I78c57abc5f6f2fbd4a2c0fbb1ee6532212679a36
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This adds help strings to commands describing what parameters they take:
btshell> help init
init [none]
btshell> help connect
connect <address: XX:XX:XX:XX:XX:XX> <address type: (public)>
Change-Id: I0b79cb4f2d424f74b0ddb1de7a6d7120e81e2ae3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
By calling the microkernel entry point 'main' there's no need to have
extra hacks to share the same c-file with both nano and micro
configurations.
Change-Id: I6623855a87ef8624b2bddb75b95079521e0eab8b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Support long write maximum 100 bytes.
Change-Id: I071fdf68e29a3d4493c1c60215853cfd8f2ae3c3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Using ARCH variable to select different configurations for the different
architectures is misleading and conflicts with the variable ARCH being used by
the build system. The variable is not needed, it is application specific and
an application can be built without the need to specify ARCH on the command
line.
This is yet another item specific to samples and test cases that
wrongfully being used and documented for every application. We need to use
another variable and just make it clear it is specific to samples and how they
are written. One possible solution is to have a script that gets the
architecture based on the board being used. Attachments
Jira: ZEP-238
Change-Id: Ieccbc087a41858fb96fb361c0aaa04705e968a4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
BTP API allows to set only advertising and scan response data without
declaring advertising type. Advertising type is deduced from current
flags status. Scan response data is static in tester - to set non
connectable mode in current BTP API scan response length must be
considered.
Change-Id: I742cd8ec774c24f317d639835844a4743bb25445
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This makes bt_gatt_write similar to bt_gatt_read where the parameters are
stored in a struct which can be used to store intermediate values while
the operation is in progress.
Change-Id: I3c62af137b99985690cf88dcc37a977a0be891f5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The old 'config_whitelist' directive in testcase.ini has been removed.
We use the new expr_parser module to parse a 'filter' directive which
is a boolean expression. This gives a great deal more flexibility
in how tests can be filtered.
To keep the tree bisectable, use of config_whitelist in testcase.ini
converted to the new expression language.
Change-Id: I0617319818c5559c0f0569d2fa73d09b681cac51
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Instead of requiring application to provide both advertising type
and address type used just require app to provide info if advertising
is connectable or not. Advertising type is set based on provided
SCAN_RSP and local privacy support.
When local privacy is enabled it is no longer possible to advertise
using identity address. If such feature is to be required later on
advertising options can be extended.
This gives BT stack full control over what type of address is used
for advertising and is a preparation for random address rotation
and OOB support.
Change-Id: I90e9a683ef3794f155707343c874f75585439325
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Callback errors should contain ATT error code not posix errors.
Change-Id: I698fac086ab8b2dca3487ab99ee974b4318d16f7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some IUTs may have predefined attributes in db which aren't take into
consideration while building via tester database. BTP clients should
know about such attribute handle offset change. After start server
we're sure that none of attributes will be added since zephyr db is
constant.
Change-Id: Ia2c6edaa7a2f3ca4a9c88fe00122c808a529dadb
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
* service include macro definition takes reference to
first service attribute of the included service
Change-Id: Ib2b1defe2c99aea738da791af74a534d56025eae
Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
This is more of a convenience to let the driver identify itself in
debug logs and the monitor protocol.
Change-Id: I73351477e98d45d6344c180b8088bde29df6f7d9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bus that we notify over the monitor protocol is really driver
specific, so let each driver specify their bus type.
Change-Id: Ic3a086fcc06352dbf051e52cef5bf6b8696349ae
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add two new test cases to exercise the code in monitor.c.
Change-Id: I66ae70e0d3b61d3b852916333019e1ed2c5c6cf4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch reorganize tester gatt commands to handle also sequence
builded gatt data base
Change-Id: I5fc89c1c498dd2ecf3999bc93e3caffd14f67cb7
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This prepares for adding other debug types besides the printf-style
logging to the console.
Change-Id: Ic2ed305192491734da991c4f61fdaace03fd60f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add config files to be used on Arduino 101 (or any Curie-based) board
with the MyNewt nimble stack running on the nRF51 and exposing HCI
over UART. These configs contain a stripped-down set of features so
that the resulting image fits e.g. on the Arduino 101.
Change-Id: I7300e9ca4205de6f52aa6ca1bfe4e0b011b6dcbe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds the guidelines for the tester application building usage.
Change-Id: Ibcd31b7bed827f8eee99fdf21d3bb1e8edd24d2e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
For memory-constrained platforms (like the Arduino 101) it's desirable
to be able to build a slimmed-down shell app that doesn't contain any
unnecessary features. This patch makes more of them optional.
Change-Id: Ia7f2cc0930dda6dfed5ce020b56913c6e0bc3d6f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With this patch net_buf based heap will be used to store attribute
user_data and UUID. This is the first step to remove gatt_buf.
Change-Id: I578f26b781e01f5f3464c05f7210dc27cdea8edf
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Most iuts data base are intended to have its attribute database builded
in sequence and its constant (except attribute values, parameters,
permissions). Patch allows btp specification to cover also devices
which cannot assign an ID right after issuing add attribute command or
set attribute component (which points to defined attribute ID).
Change-Id: Ie8e5ed223609cca2b6e3fb8444065f33b1408142
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This allows to accept or decline incoming pairing that would
otherwise result in JustWorks pairing.
Change-Id: I759ea067ef298b437e0112b8b7ef3bedf106dc52
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need to have separate configs as init sample is now
used for different build configuration tests.
Change-Id: I917692f8a8e96345afc561dd04bdcf08cdfa5de7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
So far the assumption has been that the host stack manages all
incoming and outgoing buffers. For the incoming buffers (from the
controller) this has required hci_core.c to manage its own pools and
do the host flow control. This setup makes perfect sense for an
architecture where the controller resides remotely on a different CPU
& address space (i.e. the "traditional" HCI transport case).
When the stack runs on a system where the controller resides in the
same address space this setup doesn't work that well. In such a
scenario the incoming buffers are ideally created as low down in the
stack as possible (i.e. below HCI), which means that the current
hci_core.c cannot be responsible for managing their pools.
To allow for both types of architectures this patch introduces a new
BLUETOOTH_HOST_BUFFERS Kconfig option that can be selected to say that
host-side management is desired, or deselected to say that the
controller (residing in the same address space) takes care of managing
the incoming buffers.
So far the incoming buffer types were identified by hci_core.c by
looking at their "free pool" pointers, however as soon as the pools
are allowed to be somewhere else this doesn't work. To solve this we
now require a minimum user data size for all Bluetooth buffers and use
that to store the buffer type.
Change-Id: I14bc32007e3e3f17c654f71f79b520650028d7ce
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is needed especially for nble. If bluetooth is not enabled we
cannot send another commands to tester.
Change-Id: I17e639301bba6efd127f2c743b8942c1b493f9da
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
In many cases when we want to access the 'val' member of bt_addr_le_t
it's in situations where the type needed is actually bt_addr_t. To
avoid unnecessary typecasts in these places simply embed bt_addr_t
inside bt_addr_le_t.
Change-Id: I7eecf129bee1dcf085abc83ec2f32e1a10b0b5aa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial support for the Privacy Feature, including the ability to
manage a local IRK and to use Resolvable Random Addresses.
Change-Id: I1c70aea67078dd2a5d07f3b797c37746ebe9ab61
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For STM32F103RB targets, the SRAM is overflown by 2-3kB in microkernel
test. Platforms with this SoC can still be built for in the nanokernel test.
Change-Id: I012b93cf8dfec74292f7ab228f4b2fca1a4f3444
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Take advantage of shell_init() accepting const commands array. This
moves ~280 bytes from SRAM to the text section.
Change-Id: Id64ee766e3c6cf7ce4cc623a1e21d3dacf33f050
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
The extended inquiry response data format include at least two octets:
length and type, so adding NULL termination name shall be 240-2+1
octets.
Fixes accessing wrong memory in the statement below:
...
memcpy(name, &eir[2], sizeof(name) - 1);
...
Change-Id: I71be96aed6af63d0649f4d64271208eeb11e2c6c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This function is not used outside of main.c.
Change-Id: Ia8cc6c2b2193906dd77d031b73d289c6acd128b2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to excersize different kconfig configurations in
single app. Thanks to this other samples don't have to get
extra extra options enabled just to improve test build coverage.
Change-Id: Ie5d261f3d38c60e227cf963d938b6fac6d0fb3b9
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Now start discovery GAP function interprets scan type flags (active,
passive) and starts discovery with specific LE scan parameters.
Change-Id: Iecb942e24d68790966afe893d3543433c33192dc
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Since user_data can be added with gatt_db_add, Set Value
command handler can be simplified.
Change-Id: I86d3ed411cc897488e9073492ff85e0754b2ab93
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This moves both the Bluetooth HCI and NBLE drivers under
"Bluetooth Drivers" category. This also adds a selection for
choosing Bluetooth stacks as the bulk of both HCI and NBLE stacks
cannot be compiled together.
Note that this does not move the source files. That should be
done in a separate change.
Change-Id: I32fa7097ada0fdc52bcc745adb78c7273f4023c6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With this patch BTP error will be returned if attribute with
requested ID don't exist in GATT attribute database.
Change-Id: Ic6125c6359e75a80fb9a51b6a527ee0a98628e6d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This allows to initiate BR/EDR connection with specified address.
Change-Id: I99f0d7dff29384926d3bf739831c7460a7fb5f68
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds a GAP service sample and make use of it in shell test which had
a copy of this code.
Change-Id: I5f03fb7db5349236e41bc30eb884c134136439e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Clear subscription allowing to test subscribe / unsubscribe in
sequence.
Change-Id: Ife8b994410107f05c23687e3fb23b4a81cad8ce7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds support for get supported commands of l2cap service.
Change-Id: Ic3e2b6502c05a5784d1fd01af0e47cce11e6d2c9
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch adds initial declaration of l2cap service in tester
application.
Change-Id: I9bd729bc351b2fe135e7b5b80262b45eaf70b10b
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
bt_auth_cancel can be used to cancel any type of pairing.
Change-Id: Ia1a6ba834186ab6d5082d3eb473319c2d70cf4a7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch makes adding attributes more clean.
Attribute UUID and user data are now added along with the attribute
in gatt_db_add function. Thanks to that, some static variables have
been deleted, and the code is more readable.
Change-Id: I510bd7a1a9ae0210dd90520212a340ee1a3b2b53
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
bluetooth/shell and bluetooth/tester need to be disabled on
galileo and minnowboard respectively. On these platforms,
the IRQ for the UART console and the H4 are the same IRQ line.
IRQ_CONNECT() is being called on the same IRQ line twice, and
it's only through linker luck that these tests work at all
since one driver will "win" when the mapping is set up at build
time by gen_idt.
gen_idt was supposed to break the build in this situation but
was bugged. The next patch in the series fixes gen_idt.
Change-Id: Ib4a42b57181731121dfad50606c8362a9fd0277d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>