This adds bt_gatt_register_service using bt_gatt_service which contains
the attribute array that is then added to the database saving a pointer
in each and every attribute declared.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
GAP is mandatory service and now that the db can only be build
dynamically there is no reason to keep the applications registering it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Removes CONFIG_BLUETOOTH_GATT_DYNAMIC_DB in preparation to the
introduction of bt_gatt_unregister.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove existing commands supported by CONFIG_BLUETOOTH_SHELL and make
sure all .conf select it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is possible to remove the forward declaration of l2cap_alloc_buf as
the recv pointer can be compared directly with chan pointer avoiding
using l2cap_ops directly.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Updated tests conf file with coverage for new feature Kconfig
options in the Controller. This is required to catch compile/
build regression.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement the framework for LE Scan Request Received Event.
The feature is available under the Controller's advanced
features and will be selected implcitly when Bluetooth v5.0
LE Advertising Extensions feature is implemented.
Jira: ZEP-2073
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Since Controller to Host flow control is a feature that affects both
sides equally, move it to the top-level Kconfig file and consolidate its
use in both Controller and Host.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The TX and RX pool needs to be split otherwise the TX code path may
consume all buffers causing the RX thread to deadlock which will
possible deadlock the TX thread as well in case it needs more credits.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Bluetooth Specification allows for optional Controller to Host flow
control based on the same credit-based mechanism as the Host to
Controller one. This is particularly useful in 2-chip solutions where
the Host and the Controller are connected via a physical link (UART, SPI
or similar) where the Host is sometimes required to ask the Controller
to throttle its data traffic while still making sure that relevant
events get through the line.
This implementation is based on a simple queue of pending events and
data that is populated whenever the Controller detects that the Host is
out of buffers and then emptied whenever the Host notifies the
Controller that is ready to receive data again. Events relevant to the
connections are also queued to preserve the order of arrival.
At this point the Controller ignores the connection handle sent by the
Host and treats all connections equally, and it also queues events even
for connections that have no data pending in the queue. Both this items
can be improved if necessity arises.
Note that Number of Completed Packets will still flow freely from the
Controller to the Host regardless of the pending ACL data packets, which
might lead to inconsistencies in the sequential order of certain
operations that include bi-directional data transfer.
Jira: ZEP-1735
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
If the channel is already in use don't attempt to connect it a second
time.
Change-Id: I87bdaeadbe866b59c1a7975002699d9ef7a90c61
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I6c676bc6c5e850a8725785554cd535e32067f33e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
TC_START was missing from some tests. For this reason automated testing
parsing wasn't unified for all tests. This patch fixes the issue and adds
TC_START to tests where it was missing.
Change-Id: I7e27a3fd8eaef9c3d0b0e0aeba9bca5b97eb0c58
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
The BR/EDR configuration doesn't fit e.g. the Arduino 101 anymore.
Limit it to Qemu for the time being, which is anyway the primary
target where the functionality is being tested.
Change-Id: I9a34c82157d56079e43acabe29eeadd6d99e03fe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a configuration that strips the BLE controller down to its simplest
form to catch any issues when commonly used options are not enabled.
Change-Id: Ifbec01d62b7d45fe9139dadaba734eff3b7a72b6
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implement the controller's ability to drop duplicate advertising reports
when instructed by the Host.
Jira: ZEP-1246
Change-Id: I2d1b7abf1ed950dde705e5df30a858c595f3834c
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add Controller advanced Kconfig options to select IRQ
priorities of the Radio, Ticker's Worker and JOB IRQs.
This will provide an opportunity to have peripheral IRQ's
of higher level than Bluetooth Controller.
Change-id: Iaa128c1cd64a309a77d42d485fdefe68f31e4895
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig option to enable advanced scheduling in the
controller.
Enable non-overlapping placement of observer, initiator and
master roles in timespace. Uses window offset in connection
updates and uses connection parameter request in slave role
to negotiate non-overlapping placement with active master
roles to avoid slave roles drifting into active master
roles in the local controller.
This feature maximizes the average data transmission amongst
active concurrent master and slave connections while other
observer, initiator, master or slave roles are active in the
local controller.
Disabling this feature will lead to overlapping role in
timespace leading to skipped events amongst active roles.
Change-id: I16e4e6c3ca99f93987ab86924af0cb9d76bdbc7e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Added Kconfig option to enable advanced event preparation
feature.
Enables advanced event preparation offset ahead of radio
tx/rx, taking into account predictive processing time
requirements in preparation to the event, like control
procedure handling and CPU execution speeds. Crystal
oscillator is retained between closely spaced consecutive
radio events to reduce the overall number of crystal
settling current consumptions.
This feature maximizes radio utilization in an average role
event timeslice when they are closely spaced by using a
reduced offset between preparation and radio event.
By disabling this feature, the controller will use a
constant offset between the preparation and radio event. The
controller will toggle crystal oscillator between two
closely spaced radio events leading to higher average
current due to increased number of crystal settling current
consumptions.
Change-id: I19e640f7395ac7938873ef4bfac38acf8d6f7e0e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
This fixes an issue introduced by bab3aafa2d,
which changed the default value of UART_PIPE_ON_DEV_NAME to the same
used by BLUETOOTH_UART_ON_DEV_NAME. Due to this, the BTP and HCI were using
the same UART.
Change-Id: Ib59819e49610f28f4c89c0304d024bb1b6aa506a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Added conn-update command to btshell module to test
bt_conn_le_param_update Bluetooth API.
Change-id: I205df9ffc12a0ab062de5a779ab96bc91cbd9259
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Reordered the commands in btshell to represent the logical
order of use. Moved advertise and scan before connect
command.
Change-id: Id64509e39848109a6df7ddb1306b6bd221b65c40
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add proper logging for errors in the same go.
Change-Id: I8bd4fa8d5b143e51024496bfba0056525ad35964
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Declaring these as const lets the linker generate more optimal code.
Some extra care is needed with hci_ecc.c since it was overwriting the
send callback. Now the choice of send() call is done directly in the
bt_send() function
Change-Id: Iac74f5ee9bee097bbb34c11bd13d1d886700f5cc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a Controller event that indicates everytime
advertisement event has been transmitted on air.
Change-id: I4722488bbfeca987e66983faf5b26467407a89c9
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Separate out data element structure header into type and size fields
Change-Id: I869ee1ea82db1f6d669bb905055135b7d63f3fa2
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Parameters and data must be permament for time of the operation.
Change-Id: Idd4eee948e62c2c80648116a339558042059f801
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Instead of passing exact value allow to use 'ind' for enabling
indications instead of notifications.
Change-Id: I24306a321ed90b4bcb6300846218ff7214b39bc4
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Don't echo data from received callback as this can cause
deadlock. Just dump incoming data instead.
Change-Id: Iedbbafd0406ad46ba2c9d26fd8a70fff59de8143
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
argc needs to be check before accessing argv.
Change-Id: I9cb70906a388b96df4e192dd4f31eafdab25127f
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Adds to BT shell app functionality to trigger to be found on remote
A2SRC UUID. Implements user callback to read resolved response data
and uses existing SDP client API to read attributes values.
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 77
Count: 1
> ACL Data RX: Handle 77 flags 0x02 dlen 48
Channel: 64 len 44 [PSM 1 mode 0] {chan 0}
SDP: Service Search Attribute Response (0x07) tid 2 len 39
Attribute bytes: 36
Continuation state: 0
Combined attribute bytes: 89
Attribute list: [len 84] {position 0}
Attribute: Service Record Handle (0x0000) [len 2]
0x00010005
Attribute: Service Class ID List (0x0001) [len 2]
UUID (3) with 2 bytes [0 extra bits] len 3
Audio Source (0x110a)
Attribute: Protocol Descriptor List (0x0004) [len 2]
Sequence (6) with 6 bytes [8 extra bits] len 8
UUID (3) with 2 bytes [0 extra bits] len 3
L2CAP (0x0100)
Unsigned Integer (1) with 2 bytes [0 extra bits] len 3
0x0019
Sequence (6) with 6 bytes [8 extra bits] len 8
UUID (3) with 2 bytes [0 extra bits] len 3
AVDTP (0x0019)
Unsigned Integer (1) with 2 bytes [0 extra bits] len 3
0x0102
Attribute: Browse Group List (0x0005) [len 2]
UUID (3) with 2 bytes [0 extra bits] len 3
Public Browse Root (0x1002)
Attribute: Bluetooth Profile Descriptor List (0x0009) [len 2]
Sequence (6) with 6 bytes [8 extra bits] len 8
UUID (3) with 2 bytes [0 extra bits] len 3
Advanced Audio Distribution (0x110d)
Unsigned Integer (1) with 2 bytes [0 extra bits] len 3
0x0102
Attribute: Unknown (0x0100) [len 2]
Advanced Audio [len 15]
Attribute: Unknown (0x0311) [len 2]
0x0001
< ACL Data TX: Handle 77 flags 0x00 dlen 12
L2CAP: Disconnection Request (0x06) ident 10 len 4
Destination CID: 65
Change-Id: I8938d9eebda31f3d252ff49adc1a96abfcbc5751
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Makes use ProfileDescriptorList atribute API to get remote Hands-Free
profile version.
Jira: ZEP-1112
Change-Id: I3752691057e15c3a9a681dd3277ac160096792e9
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds pool memory for storing SDP client query results and introduces
command allowing add HFPAG UUID to be resolved when connection to peer
is already set. When resolved data arrives, UUID callback handler
tries to identify RFCOMM protocol specific information, in this case
remote HFPAG Server Channel Number, stored in Protocol's Descriptor List
attribute data.
> HCI Event: Number of Completed Packets (0x13) plen
Num handles: 1
Handle: 77
Count: 1
> ACL Data RX: Handle 77 flags 0x02 dlen 55
Channel: 64 len 51 [PSM 1 mode 0] {chan 0}
SDP: Service Search Attribute Response (0x07) tid 2 len 46
Attribute bytes: 43
Continuation state: 0
Combined attribute bytes: 96
Attribute list: [len 91] {position 0}
Attribute: Service Record Handle (0x0000) [len 2]
0x00010003
Attribute: Service Class ID List (0x0001) [len 2]
UUID (3) with 2 bytes [0 extra bits] len 3
Handsfree Audio Gateway (0x111f)
UUID (3) with 2 bytes [0 extra bits] len 3
Generic Audio (0x1203)
Attribute: Protocol Descriptor List (0x0004) [len 2]
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
L2CAP (0x0100)
Sequence (6) with 5 bytes [8 extra bits] len 7
UUID (3) with 2 bytes [0 extra bits] len 3
RFCOMM (0x0003)
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x03
Attribute: Browse Group List (0x0005) [len 2]
UUID (3) with 2 bytes [0 extra bits] len 3
Public Browse Root (0x1002)
Attribute: Bluetooth Profile Descriptor List (0x0009) [len 2]
Sequence (6) with 6 bytes [8 extra bits] len 8
UUID (3) with 2 bytes [0 extra bits] len 3
Handsfree (0x111e)
Unsigned Integer (1) with 2 bytes [0 extra bits] len 3
0x0106
Attribute: Unknown (0x0100) [len 2]
Handsfree Gateway [len 18]
Attribute: Unknown (0x0301) [len 2]
0x01
Attribute: Unknown (0x0311) [len 2]
0x0027
< ACL Data TX: Handle 77 flags 0x00 dlen 12
L2CAP: Disconnection Request (0x06) ident 5 len 4
Destination CID: 64
Source CID: 64
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 77
Count: 1
> ACL Data RX: Handle 77 flags 0x02 dlen 12
L2CAP: Disconnection Response (0x07) ident 5 len 4
Destination CID: 64
Source CID: 64
Jira: ZEP-1112
Change-Id: Ibda606fabe367ca3d0353f77c7093da8c4f175c8
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Instead of using a hard-coded string, make the sample use the Kconfig
variable for the device name.
Change-Id: Ib09f594e1cba221f9064318572bd90d38bd2733a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Change BREDR_NAME to DEVICE_NAME so it can also be used as the LE
device name.
Change-Id: I9ef55d9dff098372d47d9d5754ad7a7163a65bc0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Having TX buffers split into numerous pools has the downside of
increased memory consumption. This patch takes the initial step to
consolidate these pools into a single one, saving about 248 bytes of
RAM for a basic configuration.
Change-Id: I449ba18b44a9a6af68e9a2c44f19a9286eb88b14
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This will replace the current goal of 'make qemu' with 'make run' and
moves Qemu handling into its own file and into the boards instead of
being architecture specific.
We should be able to add new boards that support some other type of
emulation (by adding scripts/Makefile.<emu type>) and allow the board to
define their own options for the use type of emulation.
'make qemu' will still work, however it will be deprecated, starting
with this commit it is recommended to use 'make run'.
Jira: ZEP-359
Change-Id: I1cacd56b4ec09421a58cf5d010e22e9035214df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
RAM size has increased on arduino_101_ble which causes it to no longer
be able to build test_controller_dbg.
Change-Id: Iab8ed2857db23d048cfa6b04e2d1fea31efbb13c
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Disk IO functions are used by both FS and USB Mass Storage.
This patch refactors those from FS directory to a separate one.
In addition existing, config options were modified to make
stuff meaningful.
Jira: ZEP-1276
Change-Id: Ia2a2e18f3dbbbdb964c3dc0427d8138ad86134cd
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Add Kconfig configuration and conditional compilation of
RSSI measurement during a connection.
Change-id: I5a2f23f76a7cbbd9569d53d31899a472bf39d3ee
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig configuration to conditionally enable Data
Length Update procedure support in the Controller.
This will save CPU time, flash and RAM, if this feature is
not desired.
Change-id: I4515c0c7cf9aeb333a289397ae3c9bac04a08e4e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig configuration to conditionally enable LE Ping
feature in the Controller.
This will save CPU time, flash and RAM, if this feature is
not desired.
Change-id: I5fbbdbe8f45ac01c9b0d7b11e002a0d1db4d272e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add a test configuration to build a controller that
supports only Bluetooth v4.0 features.
This is copy of prj_controller.conf, but Kconfig defines
will be added in subsequent commits to conditionally
compile out feature not in Bluetooth v4.0 specification.
Also, added nrf52840_pca10056 and arduino_101_ble board
builds be tested.
Change-id: I36891bfc54cc36a8588c9b019de582e3193e8aa3
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
This helps simplify code that was previously combining net_buf_add()
with memcpy().
Change-Id: If44cf9cd651aba5e544e36567869f147468663eb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To customise test builds and support test related features such as time
stamps and a boot banner, introduce a Makefile variant that is dedicated
to testing.
Initially we introduce a new config overlay that is used for all tests, in
this case we enable BOOT_BANNER and BUILD_TIMESTAMP. This will print the
current version and the date, useful when reporting bugs and also an
indicator that the system has booted before the test has started.
For example:
[QEMU] CPU: qemu32
***** BOOTING ZEPHYR OS v1.6.99 - BUILD: Dec 21 2016 19:57:13 *****
tc_start() - Test Nanokernel CPU and thread routines
Initializing nanokernel objects
...
..
Change-Id: I224318cdeb55a301964ea366dbc577e2e3a09175
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This moves the shell component into its own subsys and groups all
related files and options into a single place.
Additionally, one Kconfig option will now be required to enable the
shell:
CONFIG_CONSOLE_SHELL=y
The header files was also moved to include/shell/shell.h and can be now
referenced with
#include <shell/shell.h>
instead of
#include <misc/shell.h>
Updated documentation as well.
Change-Id: Iffbba4acfa05408055e9fd28dffa213451351f94
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This allows to specify length of discovery from command line.
Change-Id: I3ad80e74b5cdc263e549ce309b75c1f5c117b653
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There are static initializer macros available for most kernel objects
which we should use whenever possible.
Change-Id: I496f4d05d26801eddd21fae53bdd4fcdc3246fe3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Moved all libc Kconfigs to where the code is and remove the default
Kconfig for selecting the minimal libc. Minimal libc is now the default
if nothing else is configured in.
Removed the options for extended libc, this obviously was restricting
features in the minimal libc without a good reason, most of the
functions are available directly when using newlib, so there is no
reason why we need to restrict those in minimal libc.
Jira: ZEP-1440
Change-Id: If0a3adf4314e2ebdf0e139dee3eb4f47ce07aa89
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to keep the initialization process light-weight, remove
net_buf_pool_init() and instead perform the initialization of the pool
and buffers in a "lazy" manner. This means storing more information
in the pool, and removing any 'const' members from net_buf. Since
there are no more const members in net_buf the buffer array can be
declared with __noinit, which further reduces initialization overhead.
Change-Id: Ia126af101c2727c130651b697dcba99d159a1c76
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove CONFIG_TEST_RANDOM_GENERATOR from each test and sample where it
is not required.
Change-Id: I949f8e93c2cb1881622a5e48efeb87c43122a170
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Until now it has been necessary to separately define a k_fifo and
an array of buffers when creating net_buf pools. This has been a bit
of an inconvenience as well as blurred the line of what exactly
constitutes the "pool".
This patch removes the NET_BUF_POOL() macro and replaces it with a
NET_BUF_POOL_DEFINE() macro that internally expands into the buffer
array and new net_buf_pool struct with a given name:
NET_BUF_POOL_DEFINE(pool_name, ...);
Having a dedicated context struct for the pool has the added benefit
that we can start moving there net_buf members that have the same
value for all buffers from the same pool. The first such member that
gets moved is the destroy callback, thus shrinking net_buf by four
bytes. Another potential candidate is the user_data_size, however
right not that's left out since it would just leave 2 bytes of padding
in net_buf (i.e. not influence its size). Another common value is
buf->size, however that one is also used by net_buf_simple and can
therefore not be moved.
This patch also splits getting buffers from a FIFO and allocating a
new buffer from a pool into two separate APIs: net_buf_get and
net_buf_alloc, thus simplifying the APIs and their usage. There is no
separate 'reserve_head' parameter anymore when allocating, rather the
user is expected to call net_buf_reserve() afterwards if something
else than 0 headroom is desired.
Change-Id: Id91b1e5c2be2deb1274dde47f5edebfe29af383a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is used to disconnect a dlc.
Syntax:
>br-rfcomm-disconnect
Change-Id: I8f345d9fbb1f1f84bfb1f697322d9a87ff531797
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
There's now snprintk available that's more light-weight on the stack
than snprintf.
Change-Id: I6b3e4409703ca92fe6b8f4146ff47c490ab826cb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Those tests are now build with unified kernel.
Change-Id: Idbc42bb77060cea0130d62cccdf2e40aeee89128
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Switch left-over usage of TICKS_NONE and TICKS_UNLIMITED to the new
unified kernel counterparts K_NO_WAIT and K_FOREVER.
Change-Id: I2f2a16360e816f9f8791eb216deb3c70b8cc87df
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert fiber_start to k_thread_spawn and nano_fiber_fifo_put to
k_fifo_put.
Change-Id: If1ec405ec602e28a538f4c9569ede87519346559
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use defines from k_fifo intead of legacy API.
Change-Id: Ib8cf0d88240ef145da550b8cf83d2580e7140521
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use new sleep API or remove sleeps where not needed.
Change-Id: I88c0973e57eb4970b68b3f4fa428683191b1a7f0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This can be used to initiate an outgoing connection
Syntax:
>br-rfcomm-connect <channel>
Change-Id: I7ac7aeb61e7ae7e3f55c7cd7e815bdb604b27fb3
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Restructure the Bluetooth options more logically.
- Both host and controller are now behind the same high level
CONFIG_BLUETOOTH.
- Selecting controller support disables other HCI driver selection, so
the controller isn't in the same list as HCI drivers any more.
- Under the top-level there's a "Custom stack" option, which when
enabled opens up the option of choosing CONFIG_NBLE.
There are various other cleanups and simplifications in this patch as
well, since splitting these up would have been fairly tricky while
making sure all test cases still build.
Change-Id: I5bb715cb9d20201cb8b72fbd149c8a09a4b2d7d2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add an Arduino 101-specific configuration that enables flash-based
storage support as well as the file system shell.
Change-Id: Ic10ea958dd2446df4942a8dfd3cce1e3368852b2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Implement a new "clear" command to exercise the bt_storage API. The
command can either take an address parameter to clear storage for a
specific device, or, if called with the parameter "all", to clear the
entire storage.
Jira: ZEP-181
Change-Id: I1ebd17033f2062951abeeb7d7c448a34a3672577
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This increases number of available L2CAP channels for the test purposes.
This is needed for TC_COS_CFC_BV_05_C test case.
Change-Id: I5df099fb64632e1a0e557852ca55ee45a9cc89ed
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This fixes configuration file name in testcase.ini file.
Change-Id: I6496f98694415bfc3a76308aa9ee6dfd008e1691
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This updates README as well as makefile to choose Zephyr BLE firmware
configuration as a default one.
Closes: ZEP-1187
Change-Id: I78dec2a4e2b5bfe634a8b7b8897d4f6ab6b37b44
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds sample configuration file for tester application that
supports controllers with Zephyr-based BLE firmware.
Change-Id: I8b63f93d1395837b8485aba7060b6626be1daab1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The README files provided with the samples contain references to NBLE,
which is not a publicly supported solution for Bluetooth. Simply
remove these files. If the need arises to provide application-specific
information in the future we can add back per-application README
files.
Jira: ZEP-1183
Change-Id: I81b3ea5491d50fb16062ccd5a421ddc8fcb7ea42
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Ability to use Zephyr shell by multiple modules simultaneously, each
module for its own usage.
Old shell implementation enabled the user to call only one module
commands, not all of the modules simultaneously.
Change-Id: I0ef8fa2fd190b7490c44fe91d1016363258302c9
Signed-off-by: Yael Avramovich <yael.avramovich@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds support for setting the minimun required security level to
l2cap_register command:
l2cap-register <psm> [sec_level]
Note that entering the security level is optional and the default is
BT_SECURITY_LOW(1).
Change-Id: Ib6dea92919357f41fe2f4de3050b9a10a7f553d6
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This header file is not intended for applications, rather than for
drivers, so move it to the appropriate place.
Change-Id: I7ff8158418e7e839b538c6cccbb32f3af43c12c6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These options were only needed for a MyNewt-based nRF51 firmware on
these boards (the MyNewt BLE stack is called Nimble, hence the
prj_nimble.conf sample config files). With a Zephyr-based nRF51
firmware these options are no-longer needed, so it's not appropriate
to have them default to enabled. Instead, if they are needed, require
the app-specific configuration to enable them.
Change-Id: Iefbee4d97590af4e11bcedea05fe61f32a147b83
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The combined controller & host build takes up too much RAM for the
16kB arduino_101_ble target, so limit it to the 32kB nRF52 & nRF51
DevKits.
Change-Id: Ib9d04765697b7f5c748633cb6244474d92f96995
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes all Bluetooth samples and tests being build with unified
kernel. main() is now executed from init thread and specifying task
for it in mdef file is no longer needed. By default main stack is
1024 bytes and this should be enough for BT samples.
Change-Id: I6674eea2c028b78ada5190acef72937186738af2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The bt_driver API was created when Zephyr only had a Bluetooth host
stack, but no controller-side functionality. The only "driver" that
was needed for the host was the HCI driver, and hence "HCI" was
omitted from the name.
With support both for host and controller Zephyr will be getting more
Bluetooth driver types, in particular radio drivers. To prepare for
this, move all HCI drivers to drivers/bluetooth/hci/ and rename the
bt_driver API bt_hci_driver.
Change-Id: I82829da80aa61f26c2bb2005380f1e88d069ac7d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
CONFIG_ARC_INIT defaults to 'n' now days so there's no reason to try
to explicitly disable it in the sample config files.
Change-Id: I88df06ba23bdac697f0767384f7b88e3bd9fced9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This change shortens the Service Class macro name from
BT_SDP_*_SVCLASS_ID to BT_SDP_*_SVCLASS
Change-Id: I1150baae24428c6b76f005d11003291016e0a03e
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
This change adds SPP as a sample SDP service during RFCOMM
server registration. The SPP channel is now used as the
fixed channel for RFCOMM register command.
Change-Id: I3b5ad3995725adca55db1497d4a35099f6311f3b
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
This way the application can reuse the same callback for multiple CCC
since it can track what CCC is affect by checking the attribute pointer.
Change-Id: I608da643aea07de26b65d67e6db3268d717d0f53
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This testcase was being ran on Quark D2000 because it failed to
identify itself as micro. There is not enough RAM for that.
Properly tag.
Change-Id: I9fd4235f4436b914b89b10616cbed0cfb3e97b40
Jira: ZEP-1014
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Some of tests/bluetooth test are failing link step only when debug
is enabled, these filters prevent those tests from being executed
under such configuration.
Jira: ZEP-1063
Change-Id: I87fa73710d78346b1b2ce587e9055b0732d9cb49
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Clean up left-overs from this getting fixed first in master.
Change-Id: Ief41ecfdeeb51fbc76f2fe045a412ff1643f69c9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This implements GAP Unpair command handler used to remove pairing
information.
Change-Id: Ia2e2400ea06b2b904f89ec3ee88527d1ea8f7f38
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This event will be used to inform tester about PTS identity address.
Change-Id: I3d25c69c3fc9a8d8a728497d1dc1d57084373e97
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This moves discovery logic to the tester application.
BTP Start Discovery command flags have been extended with
"Use observation procedure" bit.
For now, Tester can search for devices in limited/general discoverable
mode or those that are broadcasters by setting corresponding flag bits.
Change-Id: I7142e8fdf40a9081787538e433067335d3ee0564
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This test build where BR/EDR SMP support is enabled without
LE central or singing support.
Change-Id: I61bc17e989a5752500a7d29557609d9e54b6006d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
No other board has BR/EDR support at the moment, and we're too easily
hitting RAM limits on them.
Change-Id: I81c800f979d34bd58f73a34c1038a9327556adb2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This ensures ADVTP patches are build tested with debug enabled.
Change-Id: I5c09afea4a9df84b054d2383f0b53ff85fa5dcd5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This board was recently renamed, but apparently this reference was
left out.
Change-Id: I9789fa45eab6a9b3118f0f0857ef2207311597f3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This fixes data passed to the BTP Device Found event.
Change-Id: I1ab465b87ce24f3ea10b7217c254aafaee494c91
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This makes sure A2DP support is build tested on each patch.
Change-Id: I9dba5c20d44d8ac92910e80c1ad97ac8d2207652
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure AVDTP support is build tested on each patch.
Change-Id: Ia7cf94ca84fa01bd676a99b0df58ac745bbfc8c7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure RFCOMM support is build tested on each patch.
Change-Id: I9cd60da1b0ab0db2b41487393fb59fe1b415ea01
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This board is not being used or tested and does not actually
run on any hardware, remove it in favor of well supported boards
for this CPU.
Jira: ZEP-850
Change-Id: I01c825c7eb44d6c321f2ffb88e8899da528921dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board is not being used or tested and does not actually
run on any hardware, remove it in favor of well supported boards
for this CPU.
Jira: ZEP-850
Change-Id: Ied681b6059ad74f9d019054292c919a9f938e7d3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added filter options to avoid building for the Arduino_101
and Quark_se ARC core as there is not enough RAM to run this
test.
Change-Id: I0c1172714c9827e632648fcedc67555251f25769
Signed-off-by: Itankar, Piyush T <piyush.t.itankar@intel.com>
Adds support for handling L2CAP send data command.
Change-Id: I120a9ed56506ce205e32c5efe15c5d967d7726b6
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for handling L2CAP listen command.
Change-Id: I2c9c27f925c923a14ddb28b41fbefd612b32d63a
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for handling L2CAP disconnect command.
Change-Id: If6f8f3a7485dc8ae270481ed6af4f0a4d4c69fac
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for handling L2CAP connect command.
Change-Id: I95d27831f65ed6a3e02e1d6e7583baa6890b588c
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds method which initialize data pool for L2CAP data.
Change-Id: I2b170489aa4b2afc3c1f962591f377e23d147161
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds commands to the Bluetooth Testing Protocol for L2CAP.
Change-Id: Ie9ea180c4db62c238ce1450e5714ffd7b0ca2f5f
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Remove BT_RFCOMM_SEND_RESERVE usage since it will be removed
eventually.
Change-Id: Iada20cf0692ae12996e7ed820601bb77fe47d438
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Sets new command in BT shell app to send data to peer
Syntax:
>br-rfcomm-send <number of packets>
Change-Id: Ic795d007a03f657afb833719ae0e800ca0ac6e0b
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This adds queueing support for requests that requires a response making
it simpler to use the API. The storage is keep in the parameters of the
request so it is up to the application to define how many can be queued
but in case the application don't want a request to block waiting for
a buffer it can use BLUETOOTH_ATT_REQ_COUNT to control the available
buffers which is recommended in case the requests will be sent from the
RX fiber.
Change-Id: I407c3982a7ecdc4a9eff7172d9d0addd46949783
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
prj.conf is for single mode LE controllers.
Change-Id: I138a560f4e33f6663135bbcbb4d8aeb5955342a1
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
BR/EDR support in chip is mandatory if BR/EDR is enabled so add
separate config for it. This is to avoid problems when using
single mode LE controller.
Change-Id: I9d9692b89883dd1980803d66818fb6e3a368afb0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Sets new command in BT shell app to allow register one RFCOMM server.
Syntax:
>br-rfcomm-register <Channel>
It also accept the connection from remote and provides dlc object
Change-Id: I99f672ee68785338f3bf22948d4f33b3e1aecd2e
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This sets BR/EDR name with same value used over LE.
Change-Id: I29407b0b44907b520b0f39afe868fc612c5e47d4
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Bluetooth tester is now using new system log macros.
JIRA: ZEP-311
Change-Id: I6398f2de12d5ba1073e40fd45aa8e0177d1e279d
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
This adds device address to the controller_info data. This address
may be used then by PTS for establishing connection etc.
Change-Id: Ic2319c452d94ac79376659ba37b4c9d812ccf9ae
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
If CONFIG_BLUETOOTH_PRIVACY is set in Kconfig, current settings
shall indicate it's usage.
Change-Id: I0645aedf1b774617c9d97cec0070908aef919ca7
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
Based on BTP specification following GAP_SETTINGS_* flags were added:
GAP_SETTINGS_CONTROLLER_CONFIG,
GAP_SETTINGS_STATIC_ADDRESS
Change-Id: Ic87d13772c0ef9c9bc8bba331c8bc9f3ffc93f87
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
When tester application has been initialized, send this event
to indicate that Upper Tester can send first BTP command.
Change-Id: Id3f4dd246c4e67982057f9518b4b0036e79a6a01
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
Before sending any command, the tester shall wait for this event
indicating that IUT is ready to accept first BTP command.
This is needed, because some devices need more time to initialize
their stacks, so that the first BTP command can be lost.
Change-Id: I92d1c6ea8be905734037eb29f7f270a70ab1583e
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
Depending on advertising options this can be non-connectable address.
NFC pairing application document also allows broadcaster/observer
roles.
Change-Id: I9b104ac8fb9752a083a7a31fc20598c66f23f608
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to query LE and BR/EDR OOB data.
Change-Id: I8bc281a9549092c1c4b40c346580abb5fd51d02d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This lets the callback take advantage of the powerful net_buf API for
parsing the advertising data content.
Change-Id: Id65e6e83efd60c0f36c47bc5446a2e8ec2833d7c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>