When receiving Friend Offers we should also consider unestablished
contexts, and simply start from the beginning if that happens.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Pass the subnet to some friend_cred_* APIs since it contains all
necessary information for choosing the right keys to generate them
from. Also shorten the API names to avoid awkward line splitting -
these are internal APIs so it's an acceptable compromise. One bug that
this fixes as part of the cleanup is using the right NetKey Index when
clearing Friendship: previously the code was always using the index of
the first subnet, regardless of which subnet the Friendship was based
on.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Key Refresh Phase 2 is analogous to the Key Refresh flag being set.
This means that the flag can directly be used as the index to the
new/old key two-element array.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since the stack supports runtime reset and reprovisioning, we need to
clear the network message cache whenever creating a new mesh network.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove inconsistent and sometimes unreliable tracking of what
advertising parameters should be used and when the Node Identity
advertising started. The main change that facilitates this is to have
the Node ID start timestamp as part of the mesh subnet context.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some PTS test cases only work when we're advertising using Network
Identity. Using the default timeout of 60 seconds for Node Identity
will cause this test cases to fail (i.e. the PTS gives up before
Zephyr transitions to advertising from Node Identity to Network
Identity).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The shell was being inconsistent in its parsing of boolean parameters.
Some commands were documented as accepting "on" but were actually
parsing the parameter with strtoul() which would result in 0.
Introduce a new helper to convert a string to a u8_t which still
accepts "on" or "enable". This gives us full flexibility of having a
simple interface to the user, but still allowing non-boolean values to
be tested (since on-air the value is a full octet).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of having a hard-coded UUID, introduce a command to change it.
This is particularly useful if there are many unprovisioned nodes
around.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Having the Static OOB value set up-front can be confusing to the user
since they will not know what the value is. Start off by having it
unset, but introduce a new command using which the user can either set
or clear it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We need to send out a Health Fault Current Status (the Health Model's
publication message) when all faults are cleared. The logic for
calculating number of faults was also wrong after the updated model
publication API.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Health Current Fault message size was being set too small to fit
any faults. Use a macro to make sure the size gets applied in both
places where appropriate.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fixes error encountered during connecting BLE endpoint.
[bt] [ERR] le_remote_feat_complete: Unable to lookup conn for handle 32
This is to work around a buggy controller that states support for
enhanced privacy, but misbehaves when it's enabled. This change
makes it possible to ensure the host doesn't try to enable the enhanced
event by simply disabling the privacy feature in Kconfig.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
If we get a different key value in Phase 1 we should return the same
"Cannot Update" error as in phases 2 and 3. This fixes test case
MESH/NODE/KR/BI-02-C.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes it possible to pass all IV Update tests without having to
build a custom configuration for some of the tests. We also disable
the feature in all sample configurations, but leave it on in the
tests.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There was a chance that initial beacons for subnets would be sent with
uninitialized data. Make sure we initialize the beacon data each time
when we create a new subnet.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use NULL instead of "", fix typos, and indicate app-key-add last
parameter as optional (to match the command implementation).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for sending messages that add, delete or overwrite Label
UUIDs, and add commands for these to the shell. With the help of these
commands it's possible to pass Transport Layer PTS tests (in
particular TNPT/BV-05-C) by manually adding a Label UUID through
module subscription, since the test case itself does not do this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code would unconditionally clear sent_req in update_timeout(),
which would e.g. cause us to switch to Friend Polls if the Friend
didn't respond to a Subscription List Add/Remove on the first attempt.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The purpose of using something less than the configured poll timeout
was to cover the case where the LPN establishes Friendship before the
provisioner has completely configured it. However, there's the "more
data" flag in the initial Friend Response, and we now also have a
public API to request for more messages. Both of these features
diminish the value of having a reduced initial timeout. Also, some LPN
test cases do not expect us to send frequent polls initially, causing
failures with the PTS.
Therefore, introduce a Kconfig option to set the initial timeout, and
make it default to the actual poll timeout.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Many apps, the mesh shell included (due to PTS test requirements)
benefit from exposing LPN state and polling outside of the stack.
Introduce new APIs for these, and add code to the mesh shell module to
take advantage of them.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Health Fault Test & Test Unacknowledged messages are supposed to
be sent for more than the Node Composition Data Company ID. It's true
that some PTS tests require the message to be ignored for
non-composition data ID, however that's something that should be
covered by the application that's used for testing, and not the
generic Health Server Code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for sending Health Attention messages, as well as commands
to use these new APIs from the shell.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There was a lot of code duplicated in the Foundation Client Models for
waiting on a specific status message. Refactor this into helper
functions (one per client model).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for sending Health Period messages, as well as commands to
use these new APIs from the shell.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Company ID 0xffff is treated as invalid in some contexts, so use a
valid one. Also, the Health tests require the Health Fault Company ID
to match that found in the Composition Data.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a callback to the Health Client Model context, so that the
application is able to receive Health Current Status messages that
some Health Server Model publishes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add the needed Health Client API for sending Health Fault Get, and add
a command to the shell to utilize it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fixes:
subsys/bluetooth/host/hci_core.c: In function ‘set_static_addr’:
subsys/bluetooth/host/hci_core.c:4043:1: error: label ‘generate’ defined
but not used [-Werror=unused-label]
generate:
^~~~~~~~
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Poll Timeout needs to be at least 24 bits, so u16_t doesn't
suffice and will potentially result in truncation. Use u32_t, thereby
also fixing a coverity warning.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_mesh_model_publish() is supposed to return a "not supported"
error if the publish context doesn't exist. Fixing the premature
dereferencing also fixes coverity warnings.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The separate checking for "now < reftime" is unnecessary, since the
integer over/under-flow for unsigned 32-bit values resulting from
subtraction will give the right delta even if 'now' is less than the
reference.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
After the Publish Retransmit state was introduced the Publish Period
measurement would begin once the previous Publish message has finished
transmitting. This will however cause inaccurate periods, which is
particularly an issue with the PTS that expects accuracy of less than
0.5 seconds (apparently).
Since the publication timer is also used for the retransmissions we
can't simultaneously use if for the period as well. Therefore, we
introduce a new variable called period_start which makes a note of
when the period was supposed to start, and then once all
retransmissoins are done initializes the timer with the send duration
taken into account.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The only generally available model supporting publication that's
convenient to be used for testing is the Health Server Model.
Unfortunately since this model supports period publication, the
non-periodic side got less attention and had some bugs.
The first thing that needs to be done is to verify that the period
returned by bt_mesh_model_pub_period_get() is positive. If it's zero
then no periodic publication should take place.
Another thing that this patch cleans up is the naming of the callback
used for periodic publishing. There's no need do require the callback
to call bt_mesh_model_publish() since this must happen no matter what,
so instead rename the callback from 'func' to 'update' and have the
access layer call bt_mesh_model_publish() if the callback was
successful.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When a small amount of supported connections is configured (especially
the default number of 1), connectable advertising may fail. This is
perfectly fine since as soon as a disconnection event happens the
advertising will be successfully restarted. To avoid causing
unnecessary user worries, downgrade the resulting errors to warnings.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There were some things that were working only when receiving a Node
Reset message from someone else, but not when the app called
bt_mesh_reset() directly. There was also some state cleanup missing
for the transport layer. This patch addresses all of these issues.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Configuration Client is such a generally useful feature for the
shell that it makes sense to have it as a mandatory dependency (the
shell wasn't anyway compiling at the moment without it).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Del and Overwrite operations have the exact same parameters and
expected status response as the Add operation, so we can reuse most of
the code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Even though we have LPN enabled, we might still receive messages
through other network interfaces than the advertising one (e.g. the
local network interface).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Using the start callback, especially with multi-segment messages, may
not be super useful for applications, but we should support if if they
do provide it. One application could e.g. be to calculate the duration
it takes for a multi-segment message to be completely received by the
remote end.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Model publication was broken in a couple of ways:
- The Publish Retransmit State was not taken into account at all
- Health Server used a single publish state for all elements
To implement Publish Retransmit properly, one has to use a callback to
track when the message has been sent. The problem with the transport
layer sending APIs was that giving a callback would cause the
transport layer to assume that segmentation (with acks) is desired,
which is not the case for Model Publication (unless the message itself
is too large, of course). Because of this, the message sending context
receives a new send_rel ("Send Reliable") boolean member that an app
can use to force reliable sending.
Another challenge with the Publish Retransmit state is that a buffer
is needed for storing the AppKey-encrypted SDU once it has been sent
out for the first time.To solve this, a new new net_buf_simple member
is added to the model publication context. The separate 'msg' input
parameter of the bt_mesh_model_publish() API is removed, since the
application is now expected to pre-fill pub->msg instead.
To help with the publishing API change, the Health Server model gets a
new helper macro for initializing the publishing context with a
right-sized publishing message.
The API for creating Health Server instances is also redesigned since
it was so far using a single model publishing state, which would
result in erratic behavior in case of multiple elements with the
Health Server Model. Now, the application needs to provide a unique
publishing context for each Health Server instance.
The changes are heavily intertwined, so it's not easily possible to
split them into multiple patches, hence the large(ish) patch.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Model Publish Retransmit Interval is in units of 50ms and not 10ms
like the other transmit/retransmit states. Create dedicated macros for
the Publish Retransmit State and use them where appropriate.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no need for callback exposed in the public API to be something
different than what's used internally. In fact this would just
complicate things. This patch exposes the internal callback under a
bt_mesh_adv_cb name and uses it throughout the mesh stack.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In case an outgoing message gets only delivered to the proxy interface
we should not forget to notify the send callbacks of this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some places of the code are interested in when the first advertising
event goes out. Others, on the other hand, are interested when the
last advertising event goes out. Some are even interested in both of
these. Instead of providing a single callback, provide a struct with
two possible callbacks for sending advertising PDUs.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This simplifies the callback implementations since they no-longer need
to do their own look-ups of the needed context.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We've so far been trying to keep the per-buffer mesh meta-data to
a maximum of 8 bytes in anticipation of upcoming net_buf refactoring
that'll have all net_bufs in the system with the same sized user data.
It's however slowly becoming unfeasible to do this - e.g. simply
adding user data to the sending callback would already fill up the
full 8 bytes.
To solve this issue, treat the net_buf user data as just a pointer to
the actual user data, and keep the actual user data in a separate
array. We still keep taking advantage of net_buf_id() however, so
buffers can cheaply be mapped to their meta-data.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When resetting there is no point trying to start clearing the
Friendship since there will not be any security material left to send
out PDUs.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The common interpretation (among other implementations) seems to be
that Model Publication for a given AppKey Index implies a binding for
that AppKey. This isn't currently explicitly stated in the spec, but
in order to improve interoperability go with this interpretation as
well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The variable for tracking that a buffer from the Friend Queue hasn't
been sent yet was not being properly set.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This simplifies the API since there is no-longer a need to pass a huge
number of function arguments around.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This simplifies the API since there is no-longer a need to pass a huge
number of function arguments around.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a command for getting and setting the model publication. We also
have to adjust the app's configuration, since both the Model
Publication Set and Status messages are segmented messages, meaning we
need two TX and RX segment contexts.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The value 0xffff is reserved, so we can use that to indicate whether
there's a vendor model in question or not. Simplifies things over the
previously used separate boolean value.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There were some needed changes missing after the update to have manual
control of PB-ADV & PB-GATT provisioning bearers. E.g. the test for
CONFIG_BT_MESH_LOW_POWER in net.c was no-longer indicative of scanning
being on or not.
Do the scan enabling selection within the LPN module if LPN is
supported, or otherwise enable scanning unconditionally in
bt_mesh_provision().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
10 seconds is quite long for configuration messages, and way too much
currently since we only talk through the local networking interface.
Set the default timeout to 2 seconds, and provide APIs through which
the timeout may be changed at run-time (mainly useful for the shell).
Note: The timeout_set() API is normally assumed to be called just once
for an application, based on the expected size of the network (hops &
latency). Trying to change it e.g. in a multi-threaded environment for
every message may not yield the expected results.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert the hb-ub-set command to a more generic hb-sub that can be
used both for getting and setting the Heartrate Subscription State.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert the hb-pub-set command to a more generic hb-pub that can be
used both for getting and setting the Heartrate Publication State.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Avoid having to go do "init" for the bt module before issuing "init"
for the mesh module. Instead perform Bluetooth init implicitly. The
bt_enable() API will cleanly fail with -EALREADY if it was previously
called.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the app does direct provisioning, it may still want to do common
handling through its provisioning complete callback (if it has one
registered). This also means that we always require a non-NULL
provisioning context provided to bt_enable(), and that it needs to
fail if NULL was given.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It may be useful for the app to know what the initial NetKeyIndex that
it was given during provisioning is.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is in anticipation of soon adding health client support, which
could then cause confusion due to the ambiguous API names.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that there's support for configuration client as well, rename cfg
to cfg_srv to avoid any confusion.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add the ability to track the provisioning bearer through an extra
parameter to link_open/close. Also introduce new public functions to
enable/disable specific provisioning bearers. This also means that one
now needs to explicitly enable provisioning bearers after calling
bt_mesh_init().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add commands for 1-byte states such as Default TTL, Friend and GATT
Proxy, as well as the 2-byte Relay state.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
