Use __packed so that enums consume the smallest possible size (in our
case the same as uint8_t).
Change-Id: I0440113e88a24509f406375d99173ddb54890925
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the advertising API according to what has recently been
discussed and agreed upon.
Naming-wise the most important change is the removal of "EIR" which
was confusing since this is mainly used with LE at the moment. The
Core Specification Supplement consistently uses the generic terms data
and data type to describe what we're dealing with here, so the new
names are bt_data and BT_DATA.
Another change is to detach the actual data from the struct by
converting it from an array to a pointer. This is not only essential
for supporting BR/EDR (which has a different length) but to also
minimize memory usage.
Another change is to require the caller of bt_le_adv_start() to
provide the array lengths of the ad and sd paramters. This way we
don't have to have the empty (8-byte) element at the end of each
array.
Lastly, the bt_le_adv_start() logic is slightly modified so that it
will always clear the respective data if necessary. Previously the
user might have been left with a previous callers data if it passed
NULL to the API.
Change-Id: I318026ceb1b52bb688edf4dcfed82613bd15c3e1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Uses proper bluetooth address during printing to standard output
when monitors connected, disconnected and security changed states
based on established connection transport type.
Change-Id: I87b54ee619c329ffa645bfbb5e453cf673b93181
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Change default board for nble app to arduino_101
Change-Id: I5f8cd57c9834e38125d9e17cd4c3a96427db702a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If device is operating in security mode 3 PIN request callback
is called before connected.
Change-Id: Ie36363ae7af2398276f9cc4d07126344588b9ae6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Allow to query for connection info in every state. For BR/EDR
connection destination address is valid in every state. For LE
addresses are initialized to BT_ADDR_LE_ANY until connection is
completed.
Change-Id: I0f0abcd0ff0119a82ef8eeb40c8ee3af25eb89b4
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This timeout is used only on LE link to cancel ongoing LE connection.
For BR/EDR link controller will handle page timeout.
> HCI Event: PIN Code Request (0x16) plen 6
Address: XX:XX:XX:XX:XX:XX (Sony Mobile Communications AB)
< HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0
> HCI Event: Command Complete (0x0e) plen 4
LE Create Connection Cancel (0x08|0x000e) ncmd 1
Status: Command Disallowed (0x0c)
Change-Id: I6a03da7f935f0c560d57f18abc16069d79e2be69
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch updates SM PICS to PTS 6.4 version.
Change-Id: I6944698ea4f91d94f69a6968a123e30b106f8164
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch updates GATT PICS to PTS 6.4 version.
Change-Id: I9e1416c1295c273a55a715c7207791e69b36919b
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This patch updates GAP PICS to PTS 6.4 version.
Change-Id: I3a132ffbb1db0da1b0b882a24ef4adbf2b1a77cf
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This is almost exactly the same as the peripheral app, except that it
uses CONFIG_NBLE.
Change-Id: Ia6854bce2a0babd03a3ce3251a173ce7ddbfe374
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce the basic skeleton for NBLE, which is the Bluetooth LE API
implementation targeting a custom firmware running on Nordic
Semiconductor nRF51 chips.
Change-Id: I1ce69d6ee0205e71f6bd8d256d9233c93d2cde41
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If connection was not found or PIN handler is not present legacy
pairing should be terminatde with negative PIN reply.
Change-Id: I8a8658f6eb28173537f39226c3792957a28aa7b2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Move PIN checks up to caller and make pin_code_reply handle just
HCI command.
Change-Id: I159aada8f097407d8ccdc53031ea280e69204091
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need for tracking if connection object exists.
Change-Id: I14047631b4697f892139a414c248542a2b3ae3d6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Always enable in connection object context fields related to security
requirements and encryption.
So far they were enabled only when Kconfig BLUETOOTH_SMP option is on.
Change-Id: Ib7da9ba1df97df5c08b00769c8ba078dfa63ff56
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Converts bt_keys type to atomic_t flags to enable consistent and
compact key type management.
Change-Id: Ie384168da6d5d0d1b305a33988ce7689ba3a4c6a
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Unified bluetooth address types will simplify tester code.
Change-Id: I6d973ff05a8a8dcabb12c9543cd4d747db3e6680
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Removing unneeded check makes code consistent since there is check only
in one branch. Moreover since code is executed in tx_fiber frag cannot
be NULL (result of bt_conn_create_pdu()).
Change-Id: Id2f19279f604ad52019d9c334bc29641e4341037
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In ISR context we receive NULL when there is no free buffers available.
Add handling similar to H4.
Change-Id: I9c1c2784ceaf31a1b2f9433b142a342e8dcdbc3e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Print two digits (0 prepended) till 0x0F. Do not print any
count in the beginning of output.
Change-Id: I07e8437f827604565fc8b86d81a105b3986f0a72
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
CoAP context send message data pointer is internal to coap.
ip_buf_appdata points &uip_buf(buf)[UIP_IPUDPH_LEN]. coap
internal data pointer assignment to ip_buf_appdata is wrong.
So copy data to ip_buf_appdata.
Change-Id: I3f11da382a227572c9080b210104a5b8e3dc34b4
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Emulation is not supported on basic_minuteia, only qemu_86
supports emulation.
Change-Id: Id1adc6db02aa22c86207db77fb16ac7548e09dac
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Intentionally only one CCC descriptor will be added to the database.
It's because this meets the conditions to pass PTS tests.
Change-Id: Ic29608e5a9fb4cee0c576d149e5dd26498b365ed
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
In Read By Type response, GATT Server shall send UUID of a included
service only if this service UUID is 16 bit. Otherwise GATT Client
will send Read Request to get 128 bit UUID.
Fix tested with PTS.
> ACL Data RX: Handle 64 flags 0x02 dlen 11 [hci0] 1125351.430506
ATT: Read By Type Request (0x08) len 6
Handle range: 0x0001-0xffff
Attribute type: Include (0x2802)
< ACL Data TX: Handle 64 flags 0x00 dlen 12 [hci0] 1125351.435346
ATT: Read By Type Response (0x09) len 7
Attribute data length: 6
Attribute data list: 1 entry
Handle: 0x0002
Value: 01000200
> ACL Data RX: Handle 64 flags 0x02 dlen 7 [hci0] 1125351.605504
ATT: Read Request (0x0a) len 2
Handle: 0x0001
< ACL Data TX: Handle 64 flags 0x00 dlen 21 [hci0] 1125351.613432
ATT: Read Response (0x0b) len 16
Value: efcdab89674523b10040510450aa00f0
Change-Id: Ie07ec7930663b04dc134ee1c5a95c4e0670f5926
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
According to Core Specification 4.2 Vol 3, Part G, 3.3.3.4,
Server Characteristic Configuration descriptor shall be:
"Readable with no authentication or authorization.
Writable with authentication and authorization defined by a
higher layer specification or is implementation specific."
So there shall be separate authorization permissions
for write and read access.
Change-Id: Ia2850acbb976571743bf96cf9cbe0c1128534073
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Move rx state to the h5 struct and use a commmon h5_reset_rx() helper
to reset it.
Change-Id: I92af740ae26b443460531b7200dbb0e64fb11d64
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The handling of SIGNAL and PAYLOAD states is exactly the same. Just
remove the other one.
Change-Id: Id82524812919658c6b1df76a7081c826aaf3df34
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When packet is retransmitted we need to recalculate sequence number
since it is not stored in the packet buffer.
Change-Id: Id389fa814e82cfd5e39afba1eaeaa79fc9e337f1
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In a case of unexpected SLIP_DELIMETER we need to discard remaining
bytes in UART and start from beginning.
Change-Id: Ib13a885cc1a4a188057c587e9974aff1d90594c3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This patch adds document with current supported PICS for PTS 6.3.
Change-Id: I4f8686aeb00ac95d80159d959547cc1fdac072af
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Decisions on compiler optimizations were done on the architecture level,
this does not scale and some SoCs will have different optimization levels
or compiler options needed. Moving this to the SoC makes it easy to optimize
differently when using the same CPU which we use to set the right optimization
now on the architecture level.
For IAMCU platforms, use the right architecture and tuning.
-march=lakemont -mtune=lakemont -miamcu -msoft-float
Change-Id: I0f77cffe7a139f8b2620935094437d0dfd160dfe
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Kbuild system first looks for a Kbuild file, then it looks for
a make file.
Use the Kbuild for object building and leave the Makefile for definding
build options and compiler flags and other SoC related defines.
Change-Id: I0be59bb5ae02a29108a188efbd6f14dcdb7de4ee
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The driver has to implement the logic in an interrupt based manner.
Applying the changes to the existing drivers.
Changing ADC's API and implementation as well to follow those changes.
Change-Id: Ie0c3e3e318f619ade6be935adb064a25446cc29c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The casting was wrong, resulting in setting only on of 2 slots.
Taking the opportunity to make thing a bit cleaner on the header side.
Change-Id: I3aa90b5f251f3c5aa756681425bb8ab07e3da1b5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
