Modify tinycrypt/Kconfig and tinycrypt/Makefile to include new CTR_PRNG
algorithm.
Jira: ZEP-590
Change-Id: Ied0288126c326d229508c05df4a256dea29cf740
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Update Zephyr's tinycrypt to version 2.0. This new version adds support
for ECC_DH, ECC_DSA, CMAC, & CTR_PRNG.
The following doxygen documentation typos were detected and fixed:
- ctr_prng.h:84 change plen by pLen,
- ctr_prng.h:109 change entropylen by entropyLen,
- sha256.h:110 change Sha256 by s.
ecc_dh.h is also modified to fix the discrepancy of ecc_make_key
definition and declaration.
See https://gerrit.zephyrproject.org/r/#/c/1982/
TC_FAIL and TC_SUCCESS defines are renamed in this new version of
tinycrypt, so net/bluetooth/hci_core.c, net/bluetooth/hci_ecc.c and
net/bluetooth/smp.c are also updated to reflect those changes.
Origin: https://github.com/01org/tinycrypt/archive/v0.2.0.tar.gz
Jira: ZEP-590
Change-Id: I85f4f0ab61d9b0be6a60897e2b96f245dd8c51a8
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The macro defining the device_pm_ops structs is located inside an
ifdef for CONFIG_UART_QMSI_0, so when the UART_0 is disabled at build
time, but UART_1 is still used, it references a struct not defined.
Fix it by placing the DEFINE_DEVICE_PM_OPS line outside the ifdef block.
Change-Id: I7dafda162741201ee47b5b480c07ec8c1f373d64
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Several Zephyr SDK toolchains support multilibs.
Instead of hard-coding locations of the libraries, the proper/cleanest way
is to query the GCC compiler for the locations of libgcc and libc.
However, in order to do this, we need to ensure a certain order of
initialization in the Makefile:
1. Determine CROSS_COMPILE.
We cannot determine LIB_INCLUDE_DIR, TOOLCHAIN_CFLAGS yet, as we don't
know the KBUILD_CFLAGS yet.
2. Calculate KBUILD_CFLAGS using CROSS_COMPILE
KBUILD_CFLAGS often need the compiler to validate options, i.e:
KBUILD_CFLAGS += $(call cc-option,-mabi=aapcs -mthumb -mcpu=cortex-m0)
However, LIB_INCLUDE_DIR, TOOLCHAIN_CFLAGS should not be needed for this
3. Finally, using CROSS_COMPILE and KBUILD_CFLAGS determine LIB_INCLUDE_DIR,
TOOLCHAIN_CFLAGS by querying GCC using -print-libgcc-file-name and
-print-multi-directory command line options.
This change should only affect Zephyr SDK toolchains, all other toolchains
are expected to function as before.
Change-Id: I27b460d46fe65d05fcb8bafb51cd6b3deba275ed
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Using ATOMIC_DEFINE removes the risk of the number of flags growing
past 32 and thereby causing an overflow of the flags variable.
Change-Id: Id3679a5a1b567b2681bc5bbd6384ed88478a32d6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
CONFIG_SOC_GENERIC_ARC doesn't exist so remove it.
Change-Id: Idecfd27684b5fd83b7b296daa46a1a21a0ae4d95
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CONFIG_UART_CONSOLE_BAUDRATE doesn't exist and we will get the buad rate
setup from the UART_STELLARIS config defaulting to 115200
Change-Id: I268051055689134c54c92f696a9a560ca5336844
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Use Kconfig symbol CONFIG_SOC_NIOS2_QEMU instead of CONFIG_SOC_NIOS2F_QEMU
Change-Id: Ia04666830dc9d6f64467fae103418920c202af27
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These shouldn't be exported in the official doxygen documentation
since they should only be used through the other conversion APIs.
Change-Id: I75880b42892cbfce769192ec2e8c296c954979bd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Board documentation was moved to wiki.zephyrproject.org and documents with
links to the corresponding wiki article left in their place. This fix
cleans up the figures (.png files) that were left behind and are no longer
needed here.
Change-Id: I9056046fd7c9307de750360e20d8f970ee7ae3b9
Jira: ZEP-564
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The slip driver revert (3e63a74) was incomplete, missing the Kconfig and
Makefile changes, causing 'make clean' to fail.
Change-Id: I9d944148e6be3756b62d2371a5ab5528365e1ec1
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Fix comment that had CONFIG_MICROKERNE should be CONFIG_MICROKERNEL
Change-Id: Ic7ad63350abe92e9f1b84f4de0d6d3bb1b43dc77
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The IRQ implementations of ARC, ARM, and Nios II use .gnu.linkonce
sections for declaring entires in the sw_isr_table array. It's
imperative that arch/built-in.o be linked after everything else
as we want custom interrupt handlers to take precedence over the
default spurious interrupt handlers.
Currently, any interrupt handlers defined in ext/ or usb/ will not
be installed properly on the above mentioned arches.
Change-Id: Ib3fb21ff1ef114678906f130c268c266535954f1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
An updated version of ARC GCC reports this error:
nano_init.c:340: Error: inappropriate arguments for opcode 'mov'
The offending in-line assembly code tried to move register value into a
memory location.
Use store "st" instruction instead of "mov" istruction to store
a value in memory.
Change-Id: I91ebd20495612da4d5639a3ef848379705f6dedd
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
This sample code demostrates how to use the netz API. A basic
IPv4/TCP/UDP client application is provided.
The README file describes the basic setup.
Origin: Original
Jira: ZEP-567
Change-Id: I1c7d2454336dc00747044c5fc330f9ab6457ecf1
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The idle status check before a i2c transfer is not a reliable
way to check whether i2c master is ready to transfer data. If
the data transfer for the previous API call is done, but, a
stop condition is not sent by the previous API, the i2c master
is not idle, but, it can start new data transfer.
Change-Id: I93dbf46cef6272f3da69a0d67fb737c9b480791f
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
If the delayed work FIFO never goes empty (e.g. because the work
callback keeps resubmitting or there's a very active ISR feeding items
there) then the fiber would never yield, causing all sorts of problems
for the system. Adding an explicit fiber_yield() call at the end of
the while-loop solves the issue.
Change-Id: I233b9fc18fc9db9172daf8689bd22d09952089cb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Based on review comments for previous patch at
https://gerrit.zephyrproject.org/r/3392.
The macro changed to ATOMIC_DEFINE since it reserves storage
and doesn't just announce its existence.
Change-Id: Ib6c2b76a219040694926823b94daf6fe779a05d0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Previously, gen_idt's code had to be modified to get this information.
We now print it by default when building with V=1
Change-Id: I31bd6c5b851d6280ebcedaab97bd02b8331a2f24
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
prepare_write_data is no longer need since the ATT layer is now
responsible to queue the prepare writes using regular writes to commit
the data instead.
Change-Id: I8e35307a0489505b1475cdf31773c65a51165539
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Integrating the mbedTLS to the the build proccess with the minimal
Thread configuration.
Change-Id: I0ae191434d26890537a29a247c409228180410f3
Jira: ZEP-327
Jira: ZEP-340
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Adding the mbedTLS configuration neede for Thread Network Protocol
support, this shows the modifications needed to be able to compile
on Zephyr
Jira: ZEP-327
Jira: ZEP-340
Change-Id: I80a8f44bc302905b7aa4568a40a6ca66dcaf42f8
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Porting the mbedTLS library with the minimal Thread supported
configuration, this is a TLS/SSL library highly customizable.
This show the modifications needed to be able to compile on
Zephyr build enviroment which does not have a time.h header file,
so we avoid compilation errors.
Jira: ZEP-327
Jira: ZEP-340
Change-Id: I197ea96d33748c986c71fe5a0608225aee69c8b3
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Adding the pristine version of mbed TLS to the zephyr source tree
as the initial step of porting the mbed TLS library to Zephyr
Jira: ZEP-327
Jira: ZEP-340
Origin: https://tls.mbed.org/download/start/mbedtls-2.3.0-apache.tgz
Change-Id: Iae814560310ebd00af52c7b1fb9d03195388fa0c
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
The atomic_t API supports arbitrary sized bit fields which are not
limited to a single atomic_t variable. This patch introduces a macro
to help declare right-sized atomic_t arrays given the number of bits
needed.
Change-Id: I226f6312b642551fc492df29d24764222f45ac83
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We have already done this on x86 and ARM. The policy is as follows:
* IRQ priority levels starting at 0 all have the same semantics and
do not have special properties. The priority level is either ignored
on arches which do not support programmable priority levels, or lower
priority levels take precedence over higher ones.
* Special-case priorty levels are specified via flags, in which case
the supplied priority level is ignored.
Issue: ZEP-60
Change-Id: Ic603f49299ee1426fb9350ca29d0b8ef96a1d53a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Write callback shall receive the params given in the request so the
struct itself needs to be passed.
Change-Id: Ia039c25c99efb57e4c441561067d0398d9e6277c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Eliminates assert check that complains about an attempt to allocate
a memory pool block larger than the largest possible block size.
In such cases the allocation code now just returns a NULL pointer
indicating that it was unable to allocate the requested block, just
as it does when a block smaller than the maximum size cannot be
allocated because none is currently available.
Note: One scenario in which it isn't unreasonable for an application
writer to request a block that is too big is the case where a receiving
task using a mailbox first receives an excessively large message without
its data and then tries to retrieve the data into a memory pool block
allocated by the mailbox. Rather than forcing the application writer
to check to see if the size of the received message is too big for the
memory pool, or adding code to the mailbox subsystem to do such a check,
it's easier to pass on the request to the memory pool and simply have it
return NULL, which causes the mailbox to report that data retrieval
failed. The application can then perform a single check that catches
both the case where the memory pool simply ran out of blocks and the case
where it didn't have any block big enough to handle the message.
Change-Id: Ifd2cdd8a5927b93d3e9c5df301544e522131d2c6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Code in samples does not follow an standarized format for reporting
success or operation failure -- thus we use markup (in file sample.tc)
to specify what shall be found in the console to consider execution a
success.
There is a few functional code modifications that add/extend console
messages so verification is possible or easier:
- hello_world, synchronization: extend the success message to also
print which core is running the testcase
- pci_enum: print message on success.
Change-Id: Idb6cea03adebe97d97854603f963f4e3d4cb856a
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
From the GCC manual for -Og option, introduced in GCC
4.8:
Optimize debugging experience. -Og enables optimizations
that do not interfere with debugging. It should be the
optimization level of choice for the standard
edit-compile-debug cycle, offering a reasonable level of
optimization while maintaining fast compilation and a
good debugging experience
Change-Id: I65751cf3117bc2e6f70a7008b170126160cfa48c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The small typo in the debug printed variable prevents compiling when
using debug printing in the netbuf code.
Change-Id: I6cafa82e7f5629e9021d7ad1a2130f2945b4f661
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Implements CoC channel disconnect API initiated from local and handles
response to the disconnect request from remote.
Change-Id: I25f2495404cd405dc83ad56269e4897e53d602e6
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
When user channel is disattached from connection object during channel
cleanup, resets its state to DISCONNECTED to be able reuse it from
well known init state.
Change-Id: I5733ade4be195821a1643383916c3a6fea5a88d3
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Delegates own handler for changed security information happened on BR/EDR
link. Now L2CAP layer based on transport type can independently handle
updated security information.
Change-Id: I4838f1cc9d53cf6dfab19bb9f70ec6e307741e66
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Applies on L2CAP channel object security requirement member and
implements on BR/EDR transport basic security cases during incoming
CoC connection request. Since channel security requirements can involve
sending 2 separate connection responses with proper results depending on
context path, there's a need to store L2CAP signaling identifier set in
original connection request to be restored later to help match proper
response context.
Change-Id: Ibac9a5d2443f2975637e1bd15f61afcad53f843b
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
bt_gatt_exchange_mtu does actually return an int, also change the align
the description properly so it is consistent with other functions.
Change-Id: I6a0780830e13ded15e6262a46094441a2ef662c8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces the default language to use for building, deploying
and evaluating testcases on real hardware in the automation framework.
To be able to filter testcases out based on .config values, we split
the build process into generating the configuration file, filtering
and then the actual building.
The configuration step is done first, to be able to skip as soon
as possible.
This file is in the top level as the test runner will look for
defaults in parent directories.
Note that the default's entry in tests/.tcdefaults takes advantage of
the fact that all:
- the test cases under tests/ print standarized strings for success
or failure.
- the tc_util.h kernel header will print the passed runid if specified
when finalizing the testcase. We will make sure it is found to deem
the TC succesful, ensuring that the right image is flashed and
verified.
Change-Id: If40b226aef9583f7ce4064405d9334de379f2b00
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This adds device address to the controller_info data. This address
may be used then by PTS for establishing connection etc.
Change-Id: Ic2319c452d94ac79376659ba37b4c9d812ccf9ae
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
If CONFIG_BLUETOOTH_PRIVACY is set in Kconfig, current settings
shall indicate it's usage.
Change-Id: I0645aedf1b774617c9d97cec0070908aef919ca7
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
Based on BTP specification following GAP_SETTINGS_* flags were added:
GAP_SETTINGS_CONTROLLER_CONFIG,
GAP_SETTINGS_STATIC_ADDRESS
Change-Id: Ic87d13772c0ef9c9bc8bba331c8bc9f3ffc93f87
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
Interrupt handling considerations are pervasive in core
arch code so just add the entire arch/*/core/ dirs for
each arch.
Change-Id: Id2b166541faf620f1c45d9d330fa03e5a387a88a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
checkConfig script scans all '*.c', '*.h' and '*.S' looking for all
kconfig items used into the Zephyr Code and validates if they are
defined into any '*.kconfig' file.
to execute script use:
*to run with default values:
$ checkconfig.py
*to run and get complete log of all symbols used:
$ checkconfig.py -c
*to run from a diferent subdirectory, not zephyr base, like
drivers/grove
$ checkconfig.py -s drivers/grove
*to run and exclude some directories for verification:
$checkconfig.py -e drivers
*to get more help about how to run script:
$checkconfig.py --help
Change-Id: Ia8ddda8b560305eb73224c55645729a40fcb5863
Signed-off-by: Sonia Leon Bautista <sonia.leon.bautista@intel.com>
This will guard the driver API to be safe for concurrent
invocation from fibers or tasks.
The machanism is by default disabled. To enable it, the
following flag needs to be defined:
CONFIG_GPIO_QMSI_API_REENTRANCY
Jira: ZEP-441
Change-Id: Ia3ee738aff2f8e70e4f9a7ec76346138ff6f5031
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
This will allow the driver API to be safe for concurrent invocation
from fibers and task.
The machanism is by default disabled. To enable it, the following
flag needs to be defined:
CONFIG_GPIO_QMSI_SS_API_REENTRANCY
Jira: ZEP-411
Change-Id: I5b738532f2eefec6d5d78ab6a668790dfe9faaff
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
When running independent testcases that can run on any core, in
certain platforms using the Quark SE SOC, a stub is needed in the x86
to bring up the ARC core and pass along serial port messages. This
allows the indepent testcase to be ran in the ARC core without
modifications (the same way it runs on any other core).
There is a solution planned for the future that will allow this
workaround to be removed (without need to support backwards
compatibility).
Change-Id: I2a9b7e8797d03a5a2469d7b18a3025b79226f389
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Backslashes need to be doubled up, otherwise they are interpreted like
a escape sequence and basically, dissapear. As part of this, suggest
the location of the default python installation *before* using it, for
simplicity.
Change-Id: I26ed80a7dd8c08277614dc49a3986848892ff844
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
When tester application has been initialized, send this event
to indicate that Upper Tester can send first BTP command.
Change-Id: Id3f4dd246c4e67982057f9518b4b0036e79a6a01
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>