Calculate length based on provided SSID string, so user does not have to
provide length explicitly over shell.
This patch also removes requirement of minimum 3 characters SSID, as
the shortest SSID can be even 1 character.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Older OT code used preprocessor #if conditionals, while newer code
used IS_ENABLED macro. Unify the approach by switching to the latter
option.
Additinally, fix inclusion issue that came out after switching to
IS_ENABLED.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new transport handler for MQTT, with sendmsg-like functionality.
This allows TCP transport to send PUBLISH packets w/o fragmentation at
the TCP layer. Implement this new functionality for all existing
transports.
Fixes#22679
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
`mqtt_transport_write` failue was logged with `errno` value which is not
correct as the return value from the function is valid in this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This option specifies the name of the client.
See https://tools.ietf.org/html/rfc2132#section-3.14
This is useful for identification when looking in DHCP lease table.
Signed-off-by: Luuk Bosma <l.bosma@interay.com>
We now negotiate DNS servers in the IPCP configuration. This has been
observed to speed up the connection setup. The received DNS servers
are used by the DNS resolver library, but we leave it optional since
the static server list might be preferable.
Increase MAX_IPCP_OPTIONS to 4 so that we can nack all RFC 1877
options.
Signed-off-by: Göran Weinholt <goran.weinholt@endian.se>
It is not unusual that the peer does not provide an IP address in the
ipcp negotiation. But because ppp is a peer-to-peer protocol, we do
not actually need to know the peer's address to use the network.
Signed-off-by: Göran Weinholt <goran.weinholt@endian.se>
Move auto-negotiate sequence from driver initialization to link up event
Previously when booting without ethernet cable connected the
initialization would fail and never recover.
Now we can connect the ethernet cable any time and multiple times.
This also drastically reduces boot time to main.
Logging Link up and Link down events.
Logging speed and duplex from eth_gecko logger instead of eth_gecko_phy.
Signed-off-by: Luuk Bosma <l.bosma@interay.com>
TLS sockets did not increase refcount of a net_context running TCP,
which could lead to a crash upon TCP disconnection.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
pin is an unsigned variable so there is no meaning check if it is less
than zero.
CID :208407
CID :208408
CID :208410
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
daor-oti and wopu-ot also want to be added automatically as
reviewers to POSIX arch, native_posix, nrf52_bsim and bsim
related test apps.
(see CODEOWNERS for more info about which each is interested on)
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
When checking build directory against cache on windows, certain
corner cases can end up failing the comparison because of case
difference on an otherwise identical path. This can be avoided
by ignoring case on windows.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
Fix host resolving the peer identity address in enhanced connection
complete event when the resolving list in the controller is full and
resolution is done in the host.
Move the handling from legacy connection complete into enhanced
connection complete event so that it is done for both connection
complete events.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Implements several changes to the transport layer segmented tx to
improve group message performance:
- Moves retransmit counter to tx context instead of per packet. As every
unacked packet is sent every retransmit, the retransmit counters would
be the same in each segment. This makes it easier to control progress.
- Delays the scheduling of the retransmit until the completion of the
last segment by adding a seg_pending counter. This is essentially the
same as the old behavior, except that the old behavior might retrigger
the sending before all segments are finished if the advertising is
slow.
- Allows the group transmits to stop as soon as all retransmits have
been exhausted, instead of timing out waiting for acks that won't
come. This allows group tx to finish without error.
- Fixes a bug where a failed TX would block IV update.
- Cancels any pending transmissions of acked segments.
- Reduces log level for several common group tx scenarios that aren't
erronous.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
When available, the shell will use the CDB when configuring. This
replaces the default key for configuration and self-provisioning,
ensuring that there aren't multiple key values for the same indexes.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
* arc supports mpu gap filling now.
* these tests can be used for any arch which supports mpu gap
filling.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
when MPU_GAP_FILLING is configured, the default mpu entry
(kernel read + kernel write) will be used to fill the gaps
among mpu entires to avoid dynamic mpu region splitting.
This will bring better performance in thread switch but fewer
constraints on privileged codes.
when MPU_GAP_FILLING is not configured, a sw-based mpu dynamic
region splitting is used to bypass the limitation of no mpu region
overlap in hardware. This approach will consume more hardware
mpu entries and more time in thread switch.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
arc mpu ver3 does not allow mpu region overlap, so need to enable
MPU_REQUIRES_NON_OVERLAPPING_REGIONS.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Add 2.2.0 to the version pick list. Also remove old versions so that
the oldest one is the LTS release.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a warning about the Gatekeeper issues that Catalina introduces in
the section about GNU Arm Embedded.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The GSG already includes the setup instructions. Remove the
duplicate that existed in installation_win.rst.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The GSG already includes the setup instructions. Remove the duplicate
that existed in installation_mac.rst.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The rx timeout timer callback need update trx_state variable and this
variable is protected by a mutex. Because of that, when compiling the
system with CONFIG_ASSERT=y the system reports 'ASSERTION FAIL
[!arch_is_in_isr()] @ ZEPHYR_BASE/kernel/include/ksched.h:262'.
This refactor the driver remove trx_state variable dependency and
consequently removes phy_mutex and rx timeout timer to be compliant
with kernel rules.
Fixes: #23198
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
When using internal IEEE 802.15.4 transceiver AT86RF233 at SPI speeds
above 6MHz was detected that frame buffer read returns corrupted data.
This set spi-max-frequency to 6MHz at atsamr21_xpro.dts to ensure best
relation of performance vs reliability.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The current version of at86rf2xx RX implementation don't uses advanced
capabilities offer by the transceiver. This access SRAM space to gatter
PHR information in parallel with transceiver frame reception. It allows
improve RX reception by handling properlly the frame protection feature
removing transceiver states changes.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Current rf2xx_thread_main code have too many if/for/while imbrication.
Extract methods from rx2xx_thread_main for better readability.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
blt is signed comparsion, if r6 is a negative number created by
malicious code, it will pass the check, bring a secure risk.
use blo (unsinged comparison) to do the check.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
ARC didn't have many changes, but there's a bunch of irq-related
fixes since the last release, so mention these.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This function is widely used by functions that validate memory
buffers. Macros used to check permissions, like Z_SYSCALL_MEMORY_READ
and Z_SYSCALL_MEMORY_WRITE, use these functions to check that a
pointers passed by user threads in a syscall.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Do not use the content of the status register to write into the
override register because it may have unpredictable effect,
instead to a read/modify/write on the override register.
Signed-off-by: Armand Ciejak <armandciejak@users.noreply.github.com>
It is necessary to poll the ENET_EIR_MII bit before reading
the data register as explained in the i.MX RT1060 reference
manual in chapter 41.7.17.4.
Use PHY_* functions from NXP HAL to correctly access the PHY
registers.
Signed-off-by: Armand Ciejak <armandciejak@users.noreply.github.com>
Extend the bad syscall-ID test case to cover
erroneously supplied larged unsiged syscall-ID
values.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We need an unsigned comparison when evaluating whether
the supplied syscall ID is lower than the syscall ID limit.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Now that the west parts of this file are in better shape, it seems a
shame not to flesh out the rest a bit more.
It's been a while since we looked at this document, as it's still
referring to boards (like Arduino 101) that are no longer supported by
Zephyr, and is generally lacking in concrete, step-by-step advice
for going from zero to working board.
Let's fix that.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>