This patch removes deprecated API functions and data types from
dma.h file as well as device drivers.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This adds performance test for nffs with open, close, read, write and
unlink sub test cases.
Origin: Original
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@codecoup.pl>
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This patch adds NFFS test suite ported from Mynewt. The test cases are
pretty much the same as in original implementation, however some of
them had to be adjusted to cover differences in Mynewt and Zephyr
filesystem APIs. Also the code was reformatted in some places to make
checkpatch happy.
All test cases from "basic" group can be also run on nRF52840 (nRF52 and
nRF51 do not have enough RAM to run all tests as-is).
Origin: Apache Mynewt NFFS
URL: https://github.com/apache/mynewt-nffs/tree/master
Commit: 6639f7a432e70db00ef25d5e558aedbe503a3c9a
Purpose: NFFS test suite
Maintained-by: Zephyr
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@codecoup.pl>
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Add following commands to fs shell:
- rf <filename>
- read <filename> [<offset> [<length>]]
- write <filename> [-o <offset>] <byte1> [<byte2> ... [<byteN>]]
- trunc <filename> [<length>]
For writes without offset specified, new data is appended to file.
For truncaces without length specified, 0 is default value.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This patch moves code to create absolute path of file/directory to
separate helper since the same code is used in few places.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This patch adds filesystem interface implementation for NFFS.
Default configuration for mem slabs sizes are the same as in Mynewt.
Origin: Original
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This patch adds partition for NFFS for nRF51, nRF52 and nRF52840.
The partition is placed at the end of flash. This is only added if NFFS
is enabled (since it's required) - in other case free space can be used
for other purposes.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
CONFIG_NET_L2_BT_ZEP1656 shall only be used with hosts that are known to
not comply with RFC 7668.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
CONFIG_NET_APP_BT_NODE is required in order for the Bluetooth L2 driver
to register IPSS service.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
filter-known-issues (used to remove "expected" messages from log files
during doc and test builds) now properly handles an empty log file
(there won't be anything to filter).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
- place all sensor Kconfig options in submenu
- separate device drivers and common options with a comment line
- align help text
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Move the use of tIFS software switching PPI index set up by
one position to make place for use of PA/LNA implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Earlier design captured AA twice in the first Rx in a slave
connection event and retained one of the capture until end
of event to calculate drift.
Design updated to use single capture of AA and save the
first AA capture in a slave connection event in RAM instead.
This frees up a PPI channel in the controller design.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Document internal the purposes of various Tx/Rx PDU end
capture setup.
Also, removed any redundant capture of packet end.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor refactor of radio_tmr_start to reduced duplicate
assignments common in if-then-else control path.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Composite multifunction USB devices should be able to know about
configuration change, implement it through existing callback.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support for USB 2.0 and NCM CDC protocol
Change-Id: Ib815b7d9d02d404b5dfbcc8aba1fcd7e6de71bd3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
mcuboot_constraints.h had FLASH information related to the SoC that
should be maintained as part of the SoC and not in the subsystem. Also
fixed Makefiles to check for IMG_UTIL Kconfig and not MCUBOOT.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Similar addition was don previous for nRF52840.
Added flash-controller description and moved flash description to
it. Added property for description of
the flash alignment required by write operations.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Similar addition was don previous for nRF52840.
Added flash-controller description and moved flash description to
it. Added property for description of
the flash alignment required by write operations.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
In a case gateway is not set drop packet early otherwise bogus
ARPs for 0.0.0.0 are sent.
...
[net/arp] [DBG] find_entry: (0xa8006720): dst 0.0.0.0
[net/arp] [DBG] find_entry: (0xa8006720): [0] iface 0xa800cd80 dst
0.0.0.0 ll 00:00:00:00:00:00 pending 0xa800a7c0
[net/arp] [DBG] find_entry: (0xa8006720): ARP already pending to
0.0.0.0 ll 00:00:00:00:00:00
[net/arp] [DBG] net_arp_prepare: (0xa8006720): Resending ARP
0xa800a380
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add information that IP addresses in prj_qemu_cortex_m3.conf file for
echo_client are set that qemu<->qemu communication could be tested.
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
nrf SOCs use external timer for measuring benchmarking stats.
Earlier this timer is programmed in 24 bit mode, due to which
is is getting expired in some of benchmark stats like mutex
lock/unlock. So configuring to 32 bit mode to avoid overflow.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Some of benchmark stats were not reported for nrf52/52 based SOCs.
This was because nrf based SOCs use external timer.
In timing info some of benchmark stats still use systick based APIs.
Due to which benchmarking number was not getting reported. So change
it to timer based for nrf.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
When TCP connection over IPv4 could not be established there was
an error about TCP connection over IPv6.
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
fixed error introduced in application.rst (v1.8) along with a general
spelling check pass including consistent spelling of "runtime" and
hyphenated words with "pre-"
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
A quick look at "man syscall" shows that in Linux, all architectures
support at least 6 argument system calls, with a few supporting 7. We
can at least do 6 in Zephyr.
x86 port modified to use EBP register to carry the 6th system call
argument.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Cleanup I2C drivers to not use bitfield access for config information
and instead use accessor macros that use shifts & masks. This is
cleanup towards removing the bitfield access in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If IPv6 is disabled, then it is useless to try to resolve
IPv6 address because "struct sockaddr" does not have enough
space to store IPv6 address.
Fixes#1487
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is useful to clone just the net_pkt which does not have any
data fragments linked to it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
While importing the nrf_power.h to use the nrf_power_resetreas_get()
function the missing header file error was presented.
Origin: Nordic SDK 12.2.0 (components/drivers_nrf/hal)
URL: http://developer.nordicsemi.com/nRF5_SDK/
License: 3-clause BSD
Maintained-by: External
Signed-off-by: Flavio Arieta Netto <flavio@exati.com.br>
Signed-off-by: flavio <flavio@exati.com.br>
With logging enabled, this leads to type mismatch warning, which is
promoted to error when building under CI.
Also, reomove extra "\n" from the logging messages.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
