Fixed the controller implementation for the missing advDelay
for connectable directed advertising events used in a low
duty cycle mode.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add HCI error code definitions based on the Bluetooth 5.0 specification.
That allows for example that disconnection reasons can be checked
against the constants.
Signed-off-by: Johannes Hutter <johannes.5494@gmail.com>
This fixes a bug in the cdc_ecm Ethernet over USB driver. The ECM
spec (section 3.3.1) says that the end of an Ethernet frame is marked
using the USB short packet mechanisim, where the last packet is less
than the maximum packet size. If the Ethernet frame is a multiple of
the USB maximum packet size then a final zero length packet must be
sent.
Linux however sends a one byte packet (usbnet.c:1393) to work
around hardware issues with zero length packets.
The current Zephyr driver works most of the time except when you send
an Ethernet frame of the right length where the last byte is zero,
such as:
$ ping 192.0.2.1 -s 23 -p 0
Zephyr then drops the last byte, creating a short frame which gets
dropped higher up in the stack.
Signed-off-by: Michael Hope <mlhx@google.com>
This commit fixes the crash of echo server from unsolicited RA with
reachable time set to 2147483648. The crash was in
net_if_ipv6_calc_reachable_time because such large value resulted in
modulus by zero due to integer overflow.
Fixes#6382
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Use ccache when building OpenThread. When the cache is warm, I was
able to observe that this patch sped up a clean build from 45 seconds
to 33 seconds.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Moving the ccache build script earlier in allows us to export ccache
to external projects. Using ccache with external projects, such as
OpenThread, can significantly speed up the build time.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This doesn't appear to be used by anything in Zephyr. Remove it,
as it doesn't perform correct bounds checking.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
If net_icmpv6_get_na_hdr() returns NULL (which is possible with a
specially crafted packet), utility functions net_is_solicited(),
net_is_router(), and net_is_override() will attempt to read invalid
memory.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Assertions should only be used to check invariants. Things that may
change value in runtime are better left to proper checks.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
During system initialization, the global static variable (to
mem_domain.c) is initialized with the number of maximum partitions per
domain. This variable is of u8_t type.
Assertions throughout the code will check ranges and test for overflow
by relying on implicit type conversion.
Use an u8_t instead of u32_t to avoid doubts. Also, reorder the
k_mem_partition struct to remove the alignment hole created by reducing
sizeof(num_partitions).
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Multiple partitions can be added to a domain, and if they overlap, they
can have different attributes. The previous check would only check for
W^X for individual partitions, and this is insufficient. Overlapping
partitions could have W^X attributes, but in the end, a memory region
would be writable and executable.
The way this is performed is quite "heavyweight", as it is implemented
in a O(n^2) operation. The number of partitions per domain is small on
most devices, so this isn't an issue. CONFIG_EXECUTE_XOR_WRITE is
still an optional feature.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This patch does following:-
1. Default scheduling policy should be set to SCHED_RR only when
Preemptive is enabled.
2. Default priority in attr object should equivalent to
K_LOWEST_APPLICATION_THREAD_PRIO. Posix priority corresponding
to K_LOWEST_APPLICATION_THREAD_PRIO is 1.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
We assumed that ${BOARD} and ${BOARD_FAMILY} are always the same and
thus interchangeable. That isn't always the case so use ${BOARD} proper
for when we mean the exact BOARD name we are building for vs the
BOARD_FAMILY.
We also add .dts files for board variants within a board family, such
that we have a .dts matching each board name.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In ARMv7-M (and ARMv8-M) architecture it is
implementation defined whether separate MMFAR and BFAR are
implemented. This commit ensures that we always get the true
faulting address displayed in case of MemManage- or BusFault.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Move common SoC dts.fixup defines into arch/arm/soc/<SOC>/dts.fixup so
we remove duplication in the boards and only have board specific
defines in boards/arm/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move common SoC dts.fixup defines into arch/x86/soc/atom/dts.fixup so we
remove duplication in the boards and only have board specific defines in
boards/x86/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move common SoC dts.fixup defines into arch/x86/soc/ia32/dts.fixup so we
remove duplication in the boards and only have board specific defines in
boards/x86/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move common SoC dts.fixup defines into
arch/x86/soc/intel_quark/quark_se/dts.fixup so we remove duplication in
the boards and only have board specific defines in
boards/x86/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move common SoC dts.fixup defines into
arch/arc/soc/quark_se_c1000_ss/dts.fixup so we remove duplication in the
boards and only have board specific defines in
boards/arc/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Initially this sample was intended to be very simple and schematic,
but as this sample going to become a base for stream API conversion,
time to handle all the edge conditions.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In order to address anomalies 102, 106 and 107 in nRF52, add a generic
hal_radio_reset() that does additional processing when required by a
particular IC or IC family. Implement the fix for the nRF52.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
ARM Cortex-M33 may implement an optional Floating Point Unit
(FPU) supporting single-precision arithmetic. This commit
modifies the respective GCC_M_CPU flag to comply with Cortex-M33.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
On a stm32, When we use the k_busy_wait function to wait a
delay (500us) just after an idle tickless period the delay could be
lower than the requested one. Consecutive readings of the cycle counter
made with the function k_cycle_get_32 juste after tickeless period
provides erroneous values (value jump) after some time (100 us).
To fix this issue we needs:
- Add the update of clock_accumulated_count value in the
_timer_idle_exit function.
- Treat the case in the get_elapsed_count function when the reload value
of the timer is set to a remaining value to wait until end of tick (see
_timer_idle_exit) . In this case the time elapsed until the systick
timer restart was not yet added to clock_accumulated_count. To retrieve
a correct cycle count we must therefore consider the number of cycle
since current tick period start and not only the cycle number since the
timer restart.
Fixes#6164
Signed-off-by: Holman Greenhand <greenhandholman@gmail.com>
Added a basic command line parameter parsing framework
Added the following options by now:
--stop-at=<time>: Auto-stop after <time> seconds
--seed=<seed> : random seed for entropy device
--testargs : any argument that follows is ignored in top level
and made available thru
native_get_test_cmd_line_args()
All command line parameters are still avaliable by calling
native_get_cmd_line_args(), but now you can also call
native_get_test_cmd_line_args() to get whatever was set after
--testargs
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>