This is needed if muxing is enabled in which case we must
change the UART to muxing UART after the AT+CMUX command
has succeed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of global workqueue, use own one so that the users of this
driver can more conveniently use global one. This means GSM modem
can work better with the UART muxing driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of using physical UART to connection to the modem, use
the GSM 07.10 muxing protocol and UART mux driver to create
virtual channels to the modem. This will allow simultaneous
PPP, AT and other type connections to the modem.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
By default PPP interface is not taken up automatically but only
after the PPP connection to modem is ready.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create support for muxed UARTs which are attached to a real
UART and which use GSM 07.10 muxing protocol to create virtual
channels that can be run on top of the real UART.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support to GSM 07.10 muxing protocol which is used to
share the same UART for PPP and AT commands among other things.
This allows e.g., the modem to send SMS and have PPP connection
active at the same time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Improve buffer overflow security on probe_cb. This ensures that socket
buffer have fixed lenght and content received by COAP fills properly on
metadata buffer. After that, ensures that metadata content is a valid
string with length lower than metadata size.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
A malformed JSON payload that is received from an UpdateHub server
may trigger memory corruption in the Zephyr OS. This could result
in a denial of service in the best case, or code execution in the
worst case.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Fixed the ETH_SAM_GMAC_QUEUES config by adding if-statements per SoC
series.
Signed-off-by: Vincent van der Locht <vincent@vlotech.nl>
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit enables the newly added GMAC instance in the `sam4e_xpro`
device tree.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This enable GMAC driver by default if the end application selects
NETWORKING. The driver will set MII interface since is the only one
available for SAM4E and will select a random MAC value.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit updates the Atmel SAM GMAC driver to select max frame size
value from the device tree. Now GMAC driver can operate with the three
different frame size options available.
The current supported values are: 1518, 1536 and 10240.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The current setup of physical layer forces RMII interface. The code was
refactored to have only one point to select proper phy interface. Now,
GMAC driver works with both RMII or MII interface. The phy connection
type is now selected by device tree. The default phy connection is RMII.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The SAM4E GMAC version can use only MII as phy-connection-type. This
update the current default RMII value to MII.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This add the following options to GMAC device tree bindings:
- max-frame-size
- max-speed
- phy-connection-type
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The NOCACHE_MEMORY can be enabled only for those MCU that support data
cache. The currently SoC that doesn't have data cache is SAM4E.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Improve data cache conditional build. Now data cache code is build
only if device have support to it. This enables GMAC driver for use
with devices that don't have data cache instructions.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Some drivers support NOCACHE_MEMORY sections. To have a default
fallback for systems where this isn't available or disabled a
fallback define is added.
Signed-off-by: Vincent van der Locht <vincent@vlotech.nl>
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit adds a GMAC instance to the SAM 4E device tree.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This cleans up DMA flags by separating the necessary flags for devices
with one or multiple RX/TX queues.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
There was no way to use Openthread CoAP api in zephyr application so
far. These changes enable the feature. Now you can fully use CoAP
communication in an application working in Thread network.
Signed-off-by: Lukasz Maciejonczyk <Lukasz.Maciejonczyk@nordicsemi.no>
Thread and Zigbee differ in how do they handle Frame Pending Bit field
in their frames. Introduce a new enum, `ieee802154_fpb_mode`, which
allows to configure the radio driver in an appropriate mode.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Set information about Frame Pending Bit from the ACK response in the
frame passed to OpenThread.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The radio driver will now notify the upper layer about Frame Pending Bit
value in the ACK response it sent.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
OpenThread expects information, whether Frame Pending Bit was set in the
ACK response sent by the radio driver. Carry this information in the
net_pkt structure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
clock-generator is a normal property. To access it we should use
DT_INST_PROP(0, clock_generator) and not DT_INST_CLOCKS_CELL().
Fixes: #24399
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix two issues:
1. The script assumes the default CMake generator build tool
platform is installed. On Linux at least, that's Make instead
of Ninja, but Make might not be installed since Zephyr recommends
Ninja. On Windows, that might be VS Code or nmake.
Calling `cmake -P pristine` instead of `cmake --build <path>
--target pristine` has the benefit of removing the dependency on a
build command, and hence the default generator is not relevant.
2. It also assumes run_cmake() returns control, and therefore pristine
can be run.
However, if the cmake command fails hard (say, due to issue #1
before this patch), run_cmake() throws an exception instead.
Fix that by trying to run the pristine target in a finally block
instead, and adding some manual cleanup steps in case the build
system is in a bad state and pristine fails too.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <torsten.rasmussen@nordicsemi.no>
Fixes: #24340
Using find_package(Python3 3.6) will select the highest available
python3.
This means that in case user has:
/usr/bin/python --> python2.7
/usr/bin/python3 --> python3.6
/usr/bin/python3.6
/usr/bin/python3.8
then CMake will choose python 3.8.
This commit changes that behavior, so that in the above scenario, then
Python 3.6 will be preferred.
It also adds the following, python will be preferred over python3, if
both meets the minimum requirement.
For example:
/usr/bin/python --> python3.6
/usr/bin/python3 --> python3.7
then Python 3.6 is prefered.
It further introduces PYTHON_PREFER variable, which can be used to
further control the behavior.
As example -DPYTHON_PREFER=python3.7 will choose Python 3.7 if
installed.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Pass EXTRA_DTC_FLAGS to kconfig so the EDT object we have in
kconfigfunctions can use that to set warn_reg_unit_address_mismatch
properly.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Sets the "dummy data" value to send when the transmit buffer is null.
Fixes the spi_null_tx_buf test in tests/drivers/spi/spi_loopback on the
lpcxpresso54114 board.
Tested on frdm_k64f, mimxrt1050_evk, and lpcxpresso54114_m4 boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The command-line is correct but specifies a particular release, which
may be out of date, and is not formatted as a URL that can be clicked.
Add a proper link.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
In order to implement active connection close with the
TIME_WAIT state, send FIN and enter FIN_WAIT_1 state.
We actually send FIN+ACK as most of the implementations do.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to support TIME_WAIT state during the TCP connection
termination, add a TIME_WAIT timer and the corresponding state.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to improve readability, rename TCP_FIN_WAIT
states into TCP_FIN_WAIT_1, TCP_FIN_WAIT_2.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
This patch adds the selection of the necessary CONFIG_*
options for allowing the use of privacy on VEGA platform
Signed-off-by: Jeanina Dragusin <ancajeanina.dragusin@nxp.com>
The radio on the VEGA platform will now be able to resolve Resolvable
Private Addresses through the use of the CAUv3 hardware. With this
patch the RPA feature is now fully supported on the Controller:
RPA addresses are generated with local IRK and resolved with
previously exchanged peer IRK.
Signed-off-by: Jeanina Dragusin <ancajeanina.dragusin@nxp.com>
Now that the main Zephyr build system (and the documentation's) no
longer require ZEPHYR_BASE in the environment, the sanitycheck
script's continuing to require this makes less sense.
We can easily find ZEPHYR_BASE starting from a given sanitycheck
script, so let's just do that. Preserve the ability for a user to
override the ZEPHYR_BASE location in the environment as usual for
compatibility.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This board contains an on-board Winbond W25Q16.
The chip is connected to spi1 using PB3-PB5 and PB0 as CS.
Signed-off-by: Bjarne Steinsbo <bjarne@gmail.com>
