when enable CONFIG_CUSTOM_SECTION_ALIGN, it need less alignment
memory for image rom region. But that needs carefully configure
MPU region and sub-regions(ARMv7-M) to cover this feature.
Fixes: #17337.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Python's Sets are not deterministic. This causes the following lines to
be emitted in random order in generated/syscall_dispatch.c
extern u32_t z_mrsh_k_object_release(u32_t arg1, ...
extern u32_t z_mrsh_k_object_access_grant(u32_t arg1, ...
extern u32_t z_mrsh_k_object_alloc(u32_t arg1, ...
Change noweak to a basic list.
Reproducibility regression introduced by commit 6564974bae
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
In the main Addr handler code the F1 workaround was used.
Add compile time swith depending on SOC family.
So workaround is not afffecting F2/F4 families.
Signed-off-by: Pavlo Hamov <pavlo_hamov@jabil.com>
The algorithm for converting broken-down civil time to seconds in the
POSIX epoch time scale would produce undefined behavior on a toolchain
that uses a 32-bit time_t in cases where the referenced time could not
be represented exactly.
However, there are use cases in Zephyr for civil time conversions
outside the 32-bit representable range of 1901-12-13T20:45:52Z through
2038-01-19T03:14:07Z inclusive.
Add new API that specifically returns a 64-bit signed seconds count, and
revise the existing API to detect out-of-range values and convert them
to a diagnosible error.
Closes#18465
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
timeutil_timegm() does not modify the passed structure, so it should
indicate that in the signature (even though the GNU extension does not).
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Added in 2.0, along with some binding format simplifications in 2.1.
Bunch of other stuff that could be mentioned, but keep it relatively
short.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This patch adds support for configuring the MAC address through the
Network Management API to the STM32 Ethernet driver.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
This enables the PWM blocks in DTS. Only PWM0 has been enabled
and tested due to board/jumper configurations.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Each and every instance has a specific pin.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
A 16bits on/off based PWM, found on MEC1501.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Given the RTC is used for system clock, we need to plug its interrupt
to avoid an exception that would occur if it is left unhandled.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The RTC on TI CC13X2/CC26X2 is a 32 KHz clock for which the minimum
compare delay is 3 ticks. When using it as the system clock, we need
to relax the upper bound to ensure the test succeeds.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Add RTC timer driver for CC13X2/CC26X2, and use it instead of systick
as system clock. It is necessary to use this timer for power
management support, so that the system can exit from deep sleep upon
expiry of timeouts.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This moves check_perm code under GAT and make use of it to check if CCC
write permission can be attended by the connection security level or if
it needs to be increased.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support to set different permissions to CCCD so security can
be checked when enabling notification which conforms to:
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part G page 2360:
'3.3.3.3 Client Characteristic Configuration
Authentication and authorization may be required by the server to
write the configuration descriptor.'
In addition to that also ensure that notification are not re-enabled
until the proper security level is reached to conform to the following
statement:
'10.3.1.1 Handling of GATT indications and notifications
A client “requests” a server to send indications and notifications
by appropriately configuring the server via a Client Characteristic
Configuration Descriptor. Since the configuration is persistent
across a disconnection and reconnection, security requirements must
be checked against the configuration upon a reconnection before
sending indications or notifications. When a server reconnects to a
client to send an indication or notification for which security is
required, the server shall initiate or request encryption with the
client prior to sending an indication or notification. If the client
does not have an LTK indicating that the client has lost the bond,
enabling encryption will fail.'
Fixes#17983
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix a Coverity warning when using %d to print the result
of a sizeof(...)
Since the result of the sizeof() use in the example
will always fit in a int, simply cast the result
to a int so the %d is always correct.
Fixes: #18373
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
Use the named representation for no-wait to future-proof against a
change to the representation of timeout values.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This patch adds support for SDSCv1 and SDSCv2 cards. It has been tested
with 2 GiB SDSC and 4 GiB to 32 GiB SDHC cards from SanDisk.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
Remove logging helper variable `trace_dir` from device configuration
data when it is not needed.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
The SensorTile.box is a board designed for IoT applications
embedding a wide range of intelligent low power MEMS sensors,
a STM32L4 microcontroller to manage sensor configuration and
process sensor output data, a micro-USB battery charging
interface and an ST Bluetooth Low Energy module for wireless
communication with a BLE-enabled smartphone.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This commit adds:
1. pin definitions for SPI1 on PE12-15 on STM32L4 devices
2. SPI3 on PA15_SPI3_NSS
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The correct suffix name for selecting the GPIO for SPI Chip Select
is _CS_GPIOS_CONTROLLER and not _CS_GPIO_CONTROLLER.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
static_assert was not added to C until C11. Zephyr builds default to
C99. To preserve compatibility with newlib avoid defining the
macro at standard levels where it did not exist.
Relates to #17738 and #11754.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Send and receive messages from message queue instead of using u32_t
stack variables to prevent stack overrun.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
We are observing warnings when test-compiling toolchain flags that
look like:
cannot find entry symbol _start; defaulting to 00000000000010d4
To fix this warning we explicitly set an entry point to an arbitrary
address. The files are only compiled, not run, so the entry point does
not need to be correct.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Use globbing to find release notes and display them in the expected
reverse-sorted order (newest release first). Some trickery is needed
because were not using two-digit version/subversion numbers so the list
won't sort naturally. This will eliminate the need to edit the index
page on every release, until we get to subversion 10.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Include .gcc_except_table (sub-)sections in linker files to support C++
with exceptions enabled. If these sections are not mapped warnings will
be generated for orphaned sections at link time.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Make sure that all sub-sections of .gcc_except_table are mapped in
rodata else C++ builds with exceptions enabled will generate warnings
due to orphan sections.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Added test run with exceptions enabled.
Boards colibri_imx7d_m4, warp7_m4 and pico_pi_m4 have been excluded
from test run as they do not have sufficient ROM.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Mimic what we have in cmake/compiler/gcc/target.cmake for clang
targetting ARM. Match gcc behavior by setting -fshort-enums
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Deprecate 'sub-node:' and add a more general 'child-binding:' mechanism
to bindings. Keep supporting 'sub-node:', but print a deprecation
warning when it's used.
Like 'sub-node:', 'child-binding:' gives a binding to child nodes, but
the binding is required to be a complete binding, and is treated (and
checked) like a normal binding.
'child-binding:' can in turn contain another 'child-binding:', up to any
number of levels. This is automatic from treating it like a normal
binding, and from the code initializing parent Devices before child
Devices.
This lets nodes give bindings to grandchildren.
For example, take this devicetree fragment:
parent {
compatible = "foo";
child-1 {
grandchild-1 {
...
};
grandchild-2 {
...
};
};
child-2 {
grandchild-3 {
...
};
};
};
The binding for 'foo' could provide bindings for grandchild-1/2/3 like
this:
compatible: "foo"
# Binding for children
child-binding:
title: ...
description: ...
...
# Binding for grandchildren
child-binding:
title: ...
description: ...
properties:
...
Due to implementation issues with the old devicetree scripts, only two
levels of 'child-binding:' is supported for now. This limitation will go
away in Zephyr 2.2.
Piggyback shortening 'description:' and 'title:' in some bindings that
provide child bindings. This makes the generated header a bit neater.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
It seems that gpio_pin_disable_callback() has never been working
for that sensor as it was expected. We used there argument 'dev'
as its own (lis2dw12) device pointer. While this argument is a
gpio_port device pointer not lis2dw12 sensor device pointer. So
cfg->int_gpio_pin always tries to disable callback for some random
pin read from accidental data sector.
Signed-off-by: Michał Oleszczyk <oleszczyk.m@gmail.com>
When a test fails intermittently there is currently no alternative to
looking at logs and pressing a hardware reset button. This commit
adds a Kconfig option that can be set when diagnosing an intermittent
failure. The behavior is to do a cold reset of the board when the
test passes. A counter is maintained in noinit memory to track the
number of times it takes to reproduce a failure.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Encountered situation when sdk_version string was empty
(as the result of corrupted installation).
The version should had 0.0.0 format.
Patch add check for this and descriptive failure message.
Objective is to help the user to recognize the installation failure.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
