ARC_MPU_VER 2 has a strong requirement in
* size, must be >= 2048 bytes and power of 2
* start address must be aligned to size
It may bring a big waste of memory.
On the other hand, GEN_PRIV_STACK is used for ARC_MPU_VER 2,
it conflicts with MPU_STACK_GUARD.
So considering the limmitations, remove MPU_STACK_GUARD for
ARC_MPU_VER 2
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Because ARC MPUv3 doesn't have a strong alignment requirement
as ARC MPUv2 does, no use of GEN_PRIV_STACK for it.
Without GEN_PRIV_STACK, all stack elements can be in one stack object.
See #24048.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
drop the original C macro based allocation of privilged stack as
it may cause the waste of memory for ARC MPUv2.
now use the way of GEN_PRIV_STACK to generate privilege stack as
other archs did, e.g. ARM.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This commit adds the SPI testing support with an internal MOSI to MISO
loopback for the Atmel SAM R21 Xplained Pro board.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the SPI testing support with an internal MOSI to MISO
loopback for the Atmel SAM E54 Xplained Pro board.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
A number of uart drivers may not implement the uart_configure and
uart_config_get APIs, if we get -ENOTSUP treat that as a skip.
Fixes#24355
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix node status to "okay" instead of "ok" which doesn't
seem to be in used anymore across the tree.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Once the TPM driver and the required configs have been added,
now this patch enables the usage of the PWM framework on KW41Z
SoCs. As such, the DTS gets the proper nodes and the pinmuxing
is done according to the configuration requested.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Some Kinetis SoCs have an instance of the the TPM module
that can be used for PWM control. As such, add the necessary
configurations to enable it on the SoCs that support it, as well as
enable the clock for the module to function.
In this case, the enablement is done only for the KW41Z SoCs,
but there are other SoCs that support it, f.i. KW38Z
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
The TPM (Timer/PWM Module) is a 2- to 8-channel timer which supports
input capture, output compare, and the generation of PWM signals to
control electric motor and power management applications.
This patch adds the driver and the binding necessary for instantiating
the driver. The work is based on the RV32M1 driver for TPM done by
Henrik Brix Andersen. A later patch will enable this driver to be used
for the KW41Z SoC, if PWM support is requested.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Allow to flash either Cortex M4 or M7 with OpenOCD
(depending on which Board/Core has been compiled)
Command: west flash
Warning: Dependency with recent OpenOCD patch:
Windows: https://gnutoolchains.com/arm-eabi/openocd/
version 20200408
Linux : http://openocd.zylin.com/
SHA1: 0a804222da63c5f849efa23b019a59e2dea76842
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
The Kconfig I2C_[0-9] sybmols don't have any meaning for the majority of
SoCs. The drivers doesn't utilize them and no sample or test code does
either so we can remove setting them in board Kconfig.defconfig files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* Define USB driver for base stm32wb device.
* Enable USB for the nucleo_wb55rg board.
* Properly initialize USB power + clock for the platform.
Signed-off-by: Pete Johanson <peter@peterjohanson.com>
Provide three basic examples to test the x-nucleo-iks02a1 shield:
- Test shield standard mode
Acquire sensor data from shield configured in mode 1.
- Test shield sensorhub mode
Acquire sensor data from shield configured in mode 2.
- Test on-shield microphone
Acquire microphone PDM audio and output it in 16-bit
PCM format to console.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
x-nucleo-iks02a1 shield is an arduino compatible companion board
which can be used on top of Nucleo standard boards for industrial
applications. It extends the Nucleo functionalities adding following
MEMS sensor support:
- ISM330DHCX 3-axis accelerometer and 3-axis gyroscope
- IIS2MDC 3-axis magnetometer
- IIS2DLPC 3-axis accelerometer
- IMP34DT05 digital microphone.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Enable I2S_STM32 in the soc common part, so it will no
longer be required in board default configuration.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use the endop bit in the status register (instead of using a k_sleep)
to wait until the current shub operation is completed.
Please note that the recent changes to k_sleep() API was also
breaking the compilation.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Since this is such a basic sample, it's worth nitpicking the wording a
bit:
- Add a link to the supported boards, since many first time users
will not know where it is and may start near here.
- Remove the single and multi threaded note. There's no information on
how to build it in either of these two modes or what the default is,
so it feels like a distraction for such a basic sample.
- Give a clue about how to build for another board.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The devicetree link is rendering as "Devicetree Guide" instead of
"devicetree". Fix that.
My guess is that most users won't care about the details of the
requirements, and rather just want to know if their board is supported
or not. So move the error you'll see on unsupported boards before the
details about how to add support (which involve a pretty significant
learning curve).
Also mention overlays as a way to get this working.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Various commands are getting put into their own sections when they are
really just steps along the way towards getting zephyr and installing
Python dependencies. Group them together in a section by that name,
moving the west install step there.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Strip out text that isn't needed to try to minimize the GSG's length.
Fix up some grammar nits.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Update the feature tracking page with a couple of new categories that
have been identified as missing during the Release Readiness meetings:
- Hardware support
- Meta
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add control over the use name option to advertise shell parameters as
an optional argument.
The argument count for extended advertise parameters had not been
updated for the maximum directed advertise parameter count.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Implement the BT_LE_ADV_OPT_USE_NAME when using bt_le_ext_adv_* APIs
to start the advertiser.
When starting an extended connectable advertiser the name must be
included in the advertising data, since scan response data is
not allowed in this configuration.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove setting state flags in bt_le_adv_start_ext since they are set
by le_ext_adv_param_set, except for BT_ADV_PERSIST flag.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Only persist advertising when the bt_le_adv_start API is used to start
the advertiser. For multiple advertising set a connectable advertiser
can only be started if there is a connection object available for the
advertiser. Leave the decision on which advertising set should be
advertising up to the application instead of suspending advertising
when no connection object is available.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
MACRO_MAP has the same functionality as FOR_EACH macro. Removed macro
implementation and replaced with FOR_EACH call.
Deprecated macro to avoid having two macros with the same
functionality.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In process of deprecating MACRO_MAP macro which has same functionality
as FOR_EACH macro, replaced MACRO_MAP with FOR_EACH.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Updated implementation of FOR_EACH and FOR_EACH_FIXED_ARG to use same
engine as FOR_EACH_IDX macro.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added macros which iterate over provided parameters and call specific
macro with this parameter, index and fixed argument
(FOR_EACH_IDX_FIXED_ARG).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
LoRa drivers no longer depend on CONFIG_COUNTER. Remove this
configuration option from the samples.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
Rename a few cases of DT_HAS_NODE to DT_HAS_NODE_STATUS_OKAY that snuck
in after the initial global change.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit reverts the device tree binding vendor prefix check regular
expression change that was introduced by the following commit:
5b10fac97e
The changed regular expression fails to detect the correctly specified
vendor prefixes in the `vendor-prefixes.txt`.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Rename DT_HAS_NODE to DT_HAS_NODE_STATUS_OKAY so the semantics are
clear. As going forward DT_HAS_NODE will report if a NODE exists
regardless of its status.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Restart scanning if connection creation fails; could happen
when devices with low RSSI are discovered but not available
thereafter to establish a connection.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added central sample to read die temperature value from peripheral
device.
Signed-off-by: Charan Pudiyaneravana Venkatesh <charan.pv@sixoctets.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
