In case bt_att_send fails the buffer reference need to be dropped
otherwise it will never return to the buffer poll.
Change-Id: I644a0af52d9f64fcb43a982cf121a0c51b676b90
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_gatt_read which can used to read attribute values.
Note: Attributes which values are bigger than the MTU need to be read
multiple time until the end since the stack cannot cache any data.
Change-Id: I09c502eeb674a577673182c35a0e1a84519fd3b7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes it possible to take advantage of the function also from
bt_disconnect() in the CONNECT_SCAN state.
Change-Id: I8c740f2b49b7690b6020ffd5bff6f04f8f850a5d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Prepare the function for more generic usage where it can also disable
scanning if necessary. Once all bt_conn related function are moved to
conn.c this needs to be exported, so use the proper bt_ prefix.
Change-Id: I07c1bc7981b25a516682a8d7e6566af36d3c1fd8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no state where we'd want the AUTO_CONNECT flag to stay enabled
when requesting explicit disconnection.
Change-Id: I76dc112071d30199bb5201e5d5633125e1035ad5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Calling bt_conn_set_auto_conn one can decide if auto connect shall
be used. If so, everytime the connection is lost, passive scanning
will be enabled to listen for connectable advertisements from
remote device and re-establish the connection.
Auto connect can be disabled if one decide to disconnect from
this device using bt_disconnect or call bt_conn_set_auto_conn
with auto_conn flag set to false.
Change-Id: Ic9952e313cb8612ea6c72838be0755805daeffcf
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
To avoid a forward declaration in a subsequent patch.
Change-Id: Ib3fc482af8f1fadda8e27af99811f73e64cd175a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Modifies ATT transport bt_att_read_mult_req type used in read multiple
request.
Internally now it's been declared as array of handles.
For ensuring validness of minimum PDU length being 4 octets wide for
multiple read request, new define is introduced and used instead of
type sizeof evaluation.
Change-Id: I8b0096497d456c0e6fa6b5b1eb88bb1b8079ae04
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables directly add 16-bit value at the end of operational buffer.
Value is converted to little-endian format before is appended.
Position of buffer's tail is updated during addition.
Usage of bt_buf_add() call enables monitoring available limited room
in the buffer when CONFIG_BLUETOOTH_DEBUG is on.
Change-Id: Id7ac62cd3b11ef03302e94185a7faae747eccb20
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Update test_15_4 makefile and prj files to support
CONFIG_NETWORKING_WITH_15_4_LOOPBACK_UART build.
Change-Id: I8247b67b1beac18f7c62349d049694cf5aa437ca
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add support for 802.15.4 dummy radio driver to send frames
through qemu uart and and receive frames through uart. So
two qemus can send and receive 802.15.4 frames.
Change-Id: I325281d04234f7ec07c66bf31691c18a9d7c4d93
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This adds bt_gatt_discover_descriptors which can used to discover all
descriptors in the given range.
Change-Id: Idf93852ef9d8ba3bfce20dc0b95f4e11aa0dc73d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the advertising event type is not connectable, we shouldn't
try to establish connection with this device.
Change-Id: I5be6427858856a6318553ddc0acf53aa2d991b7b
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
If we have IRK stored for device we try to connect to,
it means we should look up bt_conn based on identity address,
not the address from advertising or connection complete event.
Change-Id: Iccbd766acf9a62cfe5e967cf54597854881f37d5
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
check_pending_conn gives more information about what this function
is actually doing.
Change-Id: Id21580e03bb1c341c7cf3671a666e385738fb3d4
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
During allocation ATT pdu buffer there's possibility to precheck
whether length of such buffer doesn't exceeds ATT MTU.
Change-Id: I7f729e4d7f7474d7f33e417ea61a00ceeb7426c5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This adds above function to stop ongoing advertising.
Change-Id: I16b3913524a61e844a81cbe733f2b8e6072ab442
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
When we already have bt_keys object and want to ensure that it
contains a certain key type it's wasteful to have to go and call
bt_keys_get_type() (because of the extra lookup it'll do).
Change-Id: I97831e6817e734d7e8b6aa18c7917736577f3438
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds function handler for Find Info Response PDU which call the
request callback:
< ACL Data TX: Handle 3585 flags 0x00 dlen 9
ATT: Find Information Request (0x04) len 4
Handle range: 0x0010-0x0011
> ACL Data RX: Handle 3585 flags 0x02 dlen 14
ATT: Find Information Response (0x05) len 9
Format: UUID-16 (0x01)
Handle: 0x0010
UUID: Characteristic (0x2803)
Handle: 0x0011
UUID: Heart Rate Control Point (0x2a39)
Change-Id: I981e9efe75f6eb032d9468549272c82720cb133d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With this patch, Identity Information and Identity Address
Information are properly received. There was a bug when
returning too early from smp_pairing_master function
and not setting BT_SMP_CMD_IDENT_INFO bit in allowed_cmds.
bt: bt_smp_recv (0x0010f054): Received SMP code 0x06 len 17
bt: smp_pairing_encrypt (0x0010f054):
bt: bt_smp_recv (0x0010f054): Received SMP code 0x07 len 11
bt: smp_pairing_master (0x0010f054):
bt: bt_smp_recv (0x0010f054): Received SMP code 0x08 len 17
bt: bt_smp_recv: Unexpected SMP code 0x08
bt: bt_smp_recv (0x0010f054): Received SMP code 0x09 len 8
bt: bt_smp_recv: Unexpected SMP code 0x09
The return should be after distributing LTK, EDIV and Rand if
IdKey was not set.
bt: bt_smp_recv (0x0010effc): Received SMP code 0x06 len 17
bt: smp_pairing_encrypt (0x0010effc):
bt: bt_smp_recv (0x0010effc): Received SMP code 0x07 len 11
bt: smp_pairing_master (0x0010effc):
bt: bt_smp_recv (0x0010effc): Received SMP code 0x08 len 17
bt: smp_ident_info (0x0010effc):
bt: bt_smp_recv (0x0010effc): Received SMP code 0x09 len 8
bt: smp_ident_addr_info (0x0010effc):
bt: smp_ident_addr_info (0x0010effc): identity 88:63:DF:88:0E:83 (public)
bt: bt_smp_disconnected (0x0010effc): conn 0x0010badc handle 64
Change-Id: Ic98cf6fd6ad2f7e41c6cd506d39fc9a9571a491f
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Instead of caring about stop_scanning() failure it's better to have
bt_connect_le() do "best effort" and simply try to continue in this
case.
Change-Id: I14896a4dfbe0bfd2564a190080743f0c9b05d174
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no need to check for BT_CONN_CONNECTED for these HCI events or
ACL data. Even if the connection is being disconnected the stack will
do the right thing when the disconnect_complete event occurs.
Furthermore, these branches were actually leaking the bt_conn if the
state wasn't connected after being looked up.
Change-Id: I2e22d67cb43a86e742663a896e853de02fe9e325
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make the reference counting of bt_conn clearer by having the reference
taken by the first state transition and released by the last state
transition handled in the bt_conn_set_state() function.
Change-Id: Iee04758fcc7f770e6ccfd351f33be60e7d646f19
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Removes a duplicated comment on the FIFO documentation.
Change-Id: Iff81fd0df67e23517c199c866542db28d12cc42a
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
The bluetooth regression script now refers to PLATFORM_FLAG instead of the
obsolete BSP_FLAG variable.
Change-Id: I8cafc01b66004c7bdd76c03d3f3b6aeba134565d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the comments in ctors.c to more accurately reflect the current
state of constructors.
Change-Id: I8bea13ac9b56b4d7c6ce793f175666506fffa446
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes references to old platform names.
Change-Id: I65baa148006fbda916904914844b1b347f8ec654
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes references to old platform names.
Change-Id: I53e9994c794c6b4c292e776355a67b7923c2fdb8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the the names of the x86 platforms so that they are more generic.
generic_pc -> ia32
quark -> ia32_pci
NOTE: it is expected that the two platforms will eventually be merged into one.
one. At present, the two platforms support different hardware. For example,
the ia32 supports bluetooth whereas the ia32_pci does not, and the ia32_pci
supports both PCI and HPET whereas the ia32 does not.
Change-Id: I8a980aaef55be8c59f7d19ddeb7fafbf11253408
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Improves code consistency by abstracting the architecture directory in the
set of assembly include paths.
Change-Id: I4b3638419a1242cb0628f128c5e3b82c3357d83c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
- Lack of some includes
- And bogus function signature
Change-Id: I4d504de83efeaa223c99da3e6fbe69b6e85823ee
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The contents are split in two: Zephyr Kernel and Zephyr Project. Under
Zephyr Kernel is all the content directly about the code base. Under
Zephyr Project is all the content about the development of the kernel
and of applications. Only the Doxygen document needed to be split. The
output of the in-code comments was placed under the Zephyr Kernel while
all the Doxygen guidelines and the extraction process information were
placed under the Zephyr Project.
Change-Id: I4f7b674d19449968e976b63f40bcaa9737cc0ecb
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Move the comments from k_event.c file to event.h. Only external API information was moved.
Minor changes to adapt comments and parameters.
Change-Id: I05124fc48720105a246826c94f3f21a6e30d6043
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Renames supported platform configurations to conform to new platform
configuration naming scheme.
Example usage with PLATFORM_CONFIG:
make PLATFORM_CONFIG=basic_cortex_m3
make PLATFORM_CONFIG=basic_atom
make PLATFORM_CONFIG=basic_minuteia
make PLATFORM_CONFIG=galileo
xxx_ti_lm3s6965_defconfig -> xxx_basic_cortex_m3_defconfig
xxx_generic_pc_atom_n28xx_defconfig -> xxx_basic_atom_defconfig
xxx_generic_pc_minuteia_defconfig -> xxx_basic_minuteia_defconfig
xxx_quark_defconfig -> xxx_galileo_defconfig
Change-Id: I696eb8b9ad9a72d7a72efbe1341ce23500335764
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
