Using level will just flood the handler, as the concerned gpio pins
stays on level for some time.
Change-Id: I991d818783170b09c326350c04bb588c7324892c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As the GPIO callback is ran into ISR context, it's thus impossible to
start SPI transactions as these are interrupt based as well. Thus
forwarding the packet reading to an internal fiber.
If CONFIG_INIT_STACKS is set as well as debug mode, it will print out
the usage of the stack after each loop in read_packet().
CC2520 internal fiber stack size is set via Kconfig option, where the
default is set to 640 bytes. At this stage, this value cannot be fixed
so it's more flexible to be able to tweak it from a Kconfig option
rather than tweaking the source code.
Change-Id: I54138c4d1e66f6775b1ae0248574ac8eb5e44f3d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Updates Set Up steps from previous 01.org Gerrit to new Linux Foundation one.
Change-Id: Iab98864b405ff6dc4ea20d687fae77bd59284678
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Updated all the links and references for gerrit to the new gerrit
in LF. Also updated the screenshots to show the new gerrit and
project name.
Change-Id: If56b230379fad4de58032f9d729e6a94f27389ed
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adding in a README file for the external library of TinyCrypt providing
details for origin, commit id, and where to find the original.
Source: Original to Zephyr Project
Change-Id: Ibc7ec33f7f459e8df88978b5b4505e67a2141998
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Search engines recommend having only one heading on level 1.
Modified the headings in the documentation index file to
follow the recommendation and help ensure that search engines
place Zephyr higher on their results lists.
Change-Id: I5590138f88721d1f2cdcbb49ad2aaad1d2dcd466
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Updates files that were previously referencing the no longer in use
01.org infrastructure, now it we refer Linux Foundation name and have
updated links.
Change-Id: I9d03d7c23f855390f74219dbf1617fde1d58b33b
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Removed a repeated heading and set the ther headings
with the correct level.
Change-Id: Ief8b2f9a7f88d0b6c2456d6ae448e86bb0b8d050
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Changed the link to the ReST documentation to a external link for reusability.
Change-Id: Ia575717c0fb92672828bb11854c9a8a1268af464
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Removes the Sphinx specific ReST Markup from th README.rst file.
This allows basic ReST converters to render the README without
markup showing raw.
Change-Id: I9f31afb953802119939d177524c0d283414c3a48
Signed-off-by: Rodrigo Caballero <rodrigo.caballero.abraham@intel.com>
Adding documentation on best practices for a commit message.
Change-Id: I354fc13f641bc93c8fd82aca6310d488ffc30f24
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
gerrit_practices.rst has style and formatting issues. Bringing them back
in line with the recommended practices of the project.
Change-Id: If76406e046ab376cea3e14c0e490e38587b34e6d
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
When you run the script in another console, no bash, the script
won't be able to run the sanitycheck due to the source.
Change-Id: I89d1f0a4e0ae9f8b0bf0cea77e3752c5a1012840
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Supported platforms section (platforms.rst) renamed to "boards.rst"
and broke into two tables instead of one (x86 arch and ARM arch).
Developer feedback was that navigating for board config options
by board architectures should be made easier.
Also updated index w/TOC to make supported board details
easier to find.
Change-Id: Ic014a720fd33ee685bde5809dc5b9e0622f5e989
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Since application callbacks happen from the rx thread we cannot have
the stack as small as just 256 bytes. Make it 2kB for now, but later
this needs to be adjusted to some reasonable minimum with the help of
the stack analysis code, and then probably accompanied by a Kconfig
option for apps to increase if if needed.
Change-Id: Ie8e2ac41701101b874378ded1435a6fb06bae497
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fixes some styles and removes p_buf from debug log.
Change-Id: I861c2c250d8478353f8272e9c59c06f9fc211036
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Make code consistent and make one line less then 80 chars.
Change-Id: I4aff3542dfa150ec08ec878303011e44319b238c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Parameters should be checked according to specification. Previous
implementation don't check properly given timeout. Additional check of
lower timeout limit was required.
Change-Id: Id6d302de9c8c9952c0f61107a1ef8d9fa727bffb
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Update RPC headers to sync with NBLE firmware.
Change-Id: I3231fe16372f2a6a38868edfa543689f631d8b98
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When building 128b UUIDs, the uint16_t needs to be swapped in the
big order case only, as explained in the comments
Change-Id: Ia998d333c9a22c9989763f3729fe42c0edf16545
Signed-off-by: Louis Caron <louis.caron@intel.com>
Registering CEP attributes was not possible because
bt_gatt_attr_read_cep was not implemented causing the following error:
bt: bt_gatt_register: Failed to read attr: -71
Change-Id: Ib0860cf657d6a6001c1fd4dd2712ac7361edee1c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Applications should be able to update the connection parameters.
Change-Id: I446f64fcd0b27b605e636e566fb35a362a92de96
Signed-off-by: Louis Caron <louis.caron@intel.com>
For this demo app, set the 2001:db8::/64 address in routing
table. This way we will be able to pass data using these
addresses. Something like this should not be done in real
networking environment.
Change-Id: I1764d5ae09ab95dd580c6b48d6f368bfe283a6a3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The echo-client will timeout the packet receive after 5 seconds.
This way we at least send something instead of waiting forever
if the packet is lost.
Change-Id: Idc332965786797df4ed04dc8b3ef49af32a3f436
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix assigning negative error code to unsigned int and then compare it
against zero.
Change-Id: Idedaf91dda20a38806ee81d5c488ae8b46c8feff
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
For size_t it is hard to be negative in the following check
...
if (!data || len < 0)
...
Change-Id: Ib995d568e10aa1e3cbaf28f46d267addb876f073
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Since RPC to the NBLE is designed in a such a way that it is nearly
impossible to find out which packet received, create debug tables in
debug configuration. The tables store strings of function names
referenced by function index in a table, created the same way as RPC.
Sample output is:
...
bt: rpc_deserialize (0xa80082c4): on_nble_up
...
Change-Id: Ic91fcf73753aa9b78bdbacd5c8a0279823a4679e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Instead of destroy callback, call discovery_func with NULL attribute to
indicated that discovery has completed. This makes it clear when
discovery is completed and parameters used for it are no longer used.
Thanks to this application doesn't need to abuse user data destroy
callback for detecting if discovery has completed.
Also note that bt_gatt_discover doesn't take any user data parameter
and that destroy callback was acctually called with discovery
parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_discover_params.
Change-Id: Iec4eb9795975ef2555502e13a682e13ff37742e0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Applications that need it can retrieve the connection
parameters at any time, connected callback for example,
and eventually handle the connection update callback or
not, this gives maximum flexibility for handling these
parameters and requesting change.
Change-Id: Iba7d30ade045875ebc721fd332e031d9008e248c
Signed-off-by: Louis Caron <louis.caron@intel.com>
Sometimes the timer fiber was flooding stack usage to console.
Change-Id: I3518cc08f3c8d3ed8ccc19e7bbb6356811e28ab7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The stack analyzer works now same was as the one found in
Bluetooth sub-system.
Change-Id: I75e393882db6ba83f991d37aa2bf81d960b61231
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is the MTU supported by the firmware and is necessary in order to
register bigger services such as vendor specific in the peripheral
sample.
Change-Id: I24b2f9e983d8e2da22d41a40f538f0daf7d526d0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The echo-server uses only one code base for both microkernel
and nanokernel.
Change-Id: I7abdf76dc13c31e4f91d0fd9d3b870ffe20ac71b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The echo-client uses only one code base for both microkernel
and nanokernel.
Change-Id: Ieaf9a969319537286181ba333e3a05bfa0e9363a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Separate setup for different low level bearer. By default the
Makefile will create version suitable for qemu testing using
slip. If one writes "make NET_IFACE=802154" then IEEE 802.15.4
radio specific settings are activated.
Because echo-client does not contain any processor specific
settings, remove the ARM config files and rename the x86
specific ones.
Change-Id: I0608b6172bdd044dd49dedf86477ef8a31391a23
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Separate setup for different low level bearer. By default the
Makefile will create version suitable for qemu testing using
slip. If one writes "make NET_IFACE=802154" then IEEE 802.15.4
radio specific settings are activated.
Because echo-server does not contain any processor specific
settings, remove the ARM config files and rename the x86
specific ones.
Change-Id: I2caf26979f32496c6efb4dd1f625a60e3e5f6744
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
struct bt_uuid is a 'tentative' UUID type and shouldn't be used for
UUID storage. Since tester application doens't know type of UUID
on compile time we need to have a common extra type that would
allow to store both 16 and 128 UUIDs.
Change-Id: Ia2775a457a732cf03ba7e4a59e6d654fcd1ab05d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This type should only be used as a pointer.
Change-Id: Icf656f310344cecbde527e809af6d00dcfc7ef82
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
