Use of `ldr` triggers unaligned memory access when loading SVC
instruction to r0. This is caused by the fact that SVC is a 16-bit
instruction, hence with a 2 byte offset, we are performing an non-word
aligned access. Prevent this by using `ldrh` to load a halfwords rather
than full words.
Change-Id: Ieae60c2ce86c6cfe15c89627d3a450797ce7e714
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add support for use of HSE (incorrectly named PREDIV1)as input of PLL,
along with HSE bypass for stabilized external clock, and XTPRE
prescaler. Update PLL handling so that we do not unnecessarily enable
PLL clocks, instead enabling only the clocks sources that are required
as per user's configuration.
This change allows higher SYSCLK clock values, up to 72MHz.
Change-Id: Ia7c2be3ce11ac0de2efa664b20e7ab5fddd57a51
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add mapping of registers for embedded flash controller.
Change-Id: I81f891551124e9f124ff59dfe0b3c737ec5b3b63
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
If the received packet is corrupted and the IPv6 extension
header is too big, then just discard the packet.
Change-Id: I5071fc48a927d14f02ed3dda199f67c095d05b91
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the fragment is corrupted and tells that the total packet
size is too big, then we must discard the packet.
Change-Id: I6257d677d1d2cfc30f37ad6fe4d59051d0e041ef
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now start discovery GAP function interprets scan type flags (active,
passive) and starts discovery with specific LE scan parameters.
Change-Id: Iecb942e24d68790966afe893d3543433c33192dc
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Since user_data can be added with gatt_db_add, Set Value
command handler can be simplified.
Change-Id: I86d3ed411cc897488e9073492ff85e0754b2ab93
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
When bond is required only for current connection session, don't store
the link key value in keys database when such link key is generated.
Release the link key storage on disconnection complete.
> HCI Event: IO Capability Response (0x32) plen 9
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
IO capability: DisplayOnly (0x00)
OOB data: Authentication data not present (0x00)
Authentication: No Bonding - MITM required (0x01)
> HCI Event: IO Capability Request (0x31) plen 6
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
< HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
IO capability: KeyboardOnly (0x02)
OOB data: Authentication data not present (0x00)
Authentication: No Bonding - MITM required (0x01)
> HCI Event: Command Complete (0x0e) plen 10
Change-Id: Ibd29457a9183f33f28264b857dd2de01f96d266f
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds user flag to enable a user to input interactively requested
passkey and releases the context flag after user interaction is
finished.
Change-Id: I5822ebdf5a7a78578d927d8b0cb272656cb26142
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
During handling User Confirmation request, set user flag to allow stack
handle interaction with user authentication callback mechanism.
Change-Id: I7779e3dd8e5cee4caf9f182f02c7409bb5bb8c61
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Rejects by negative reply to authentication request if HIGH
security is required on local and both devices IO Capability values
disallow to interact with user.
Change-Id: Ia670d0b3c5c66a27175f4f5f38cd56e845e393b0
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
For now as local host works as pairing acceptor, the pairing context
flag is set when remote IO Capabilities is received.
Reply to the request uses remote's authentication requirement
cross-checked against predefined authentication methods that are based
on local and remote IO capabilities.
> HCI Event: IO Capability Response (0x32) plen 9
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
IO capability: NoInputNoOutput (0x03)
OOB data: Authentication data not present (0x00)
Authentication: No Bonding - MITM not required (0x00)
> HCI Event: IO Capability Request (0x31) plen 6
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
< HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
IO capability: DisplayYesNo (0x01)
OOB data: Authentication data not present (0x00)
Authentication: No Bonding - MITM not required (0x00)
> HCI Event: Command Complete (0x0e) plen 10
IO Capability Request Reply (0x01|0x002b) ncmd 1
Status: Success (0x00)
Address: 00:1A:7D:DA:71:13 (cyber-blue(HK)Ltd)
Change-Id: I0f95a58178618f06de16cce0e9d9cf6c85209677
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
According Core Spec 4.2 [Vol 2 Part E, 7.7.41], remote authentication
and IO capability requirements have defined valid ranges.
Change-Id: I0f7cfb79097abbf96b3fee79a757431b6beef665
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Extended Inquiry Result Event shall always have one report so there is
no need to iterate over array.
Change-Id: Id6c550074395666b36d4dc6b956c9e4ae4154938
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Move re-enabling logic to the NBLE stack.
Change-Id: I1b895aa952a241dc41e2fc9faa2794a8c2c2d2db
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
These options shouldn't show up unless the HCI stack has been
selected.
Change-Id: I0f07c56f899ec833bec64ff062e1456341845027
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When capping the the absolute value of the width modifier in printf(),
it must first be cast to an 'unsigned'. This stems from the fact that
in two's complement, not all negative numbers have a positive counterpart.
Change-Id: I3e6f92f68ab1b8dab48bbf883c5ad4b078a93f87
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Before moving pinmux related code to 'drivers/pinmux' fix their return
codes to be consistent with the rest of the API.
Change-Id: Ie84f64e93745d44bef8b9d2119f6a05cdc8cb8c4
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Fix for imperative API descriptions, note needs work (see comment).
Change-Id: I300ff03ee5c6b6cb50cf2b1614f22940a0b10213
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Add enum value for full-scale attribute, so we can implement runtime
alteration if needed.
Change-Id: Ib71b4cac6e8841e3f082c07ee75939d1c51209b4
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Add generic sample that continuosly read magnetometer data from
the first device that finds available within a predefined list.
Change-Id: Ia9b5fd434f462fb4704896852415f90eb633e1eb
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Minor edits to clarify wording, readability of rendered documentation
Change-Id: I4144cfb8e191234d5fb3b6aa0fc3324b85cd286a
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
To enhance readability, add bold, lists in sentence form (as per
the style guide) and other parallel content from microkernels section.
Change-Id: Ida989ec7187bf7a035803644b5cc710571b66e3e
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Add driver for the HDC1008 temperature and relative humidity
sensor.
Datasheet:
http://www.ti.com/lit/ds/symlink/hdc1008.pdf
Origin: Original
Change-Id: I63cb4cdd94120b80d0d6f3205da073f0817c4f17
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
This moves both the Bluetooth HCI and NBLE drivers under
"Bluetooth Drivers" category. This also adds a selection for
choosing Bluetooth stacks as the bulk of both HCI and NBLE stacks
cannot be compiled together.
Note that this does not move the source files. That should be
done in a separate change.
Change-Id: I32fa7097ada0fdc52bcc745adb78c7273f4023c6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add :dfn: and other .rst kinds of syntax and parallel format to
other documents in the microkernel sections. Corrected a few
typos.
Change-Id: I8e0d36a2f9091f551674fdf0518bb66453ada49b
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Add device driver for the BMA280 I2C-based triaxial accelerometer
sensor, which supports reading data from the accel-x, accel-y, accel-z
and temperature channels. The driver also has support for data-ready
and any-motion triggers.
Datasheet:
http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf
Origin: Original
Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
This patch fixes the QMSI UART shim driver so we are able to use it in
Quark D2000 based platforms. Differently from Quark SE, the peripheral
clock gate bit (CLK_PERIPH_CLK) is not enabled by default in Quark
D2000. We have to explicitly set this bit in order to properly initialize
the device.
Since this drivers is now properly working on Quark D2000, this patch
also sets the QMSI driver default options in arch/x86/soc/quark_d2000/
Kconfig.
Change-Id: I817b7703554be162ac628dcd8d3d07512b9eb3f5
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch fixes the gpio, i2c and watchdog shim drivers so they set the
CLK_PERIPH_CLK bit during driver initialization. Differently from Quark
SE, the peripheral clock gate bit (CLK_PERIPH_CLK) is not enabled by
default in Quark D2000. We have to explicitly set this bit in order to
properly initialize the device.
This issue has been masked so far because the CLK_PERIPH_CLK bit is set
when UART NS16550 driver is enabled. The UART NS16550 driver is enabled
by default for Quark D2000 so gpio, i2c and watchdog sample apps were
working just fine. But if we disable the NS16550 driver, these samples
applications stop working.
The remaining shim drivers already set the CLK_PERIPH_CLK bit during
initialization so there is no need to fix them.
Change-Id: I3f658da564f87e9d52092ce7aac423c7b3e0c890
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Corrected an "is is" and other minor punctuation + grammatical edits.
Change-Id: I26f51809215a8ac77a20bc9d424e6a806e29ee50
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
For zsh users, to successfully source this environment set up script,
the version of zsh need to be 5.0.6 or above. Users can download the
newest zsh at http://zsh.sourceforge.net/Arc/source.html, and then
install it manually.
Change-Id: I1877b4030cf8688bce6b2483c302f957f4a5506f
Signed-off-by: d0u9 <d0u9.su@outlook.com>
An example of button driver.
Change-Id: I8af860058166d7ca5653f50ff585bc9784008f78
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add a driver for Independent Watchdog (IWDG) commonly found in STM32
MCUs. The driver has been tested on STM32F1 family MCU.
Change-Id: Idc6ac35990e46901a206b4af0ce3767eb4875de9
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
