DEV_* error codes are being deprecated so hide them from
public documentation, to prevent mis-use.
Change-Id: Iee2f59502c9470c14ddf2fb1ed19b3526609e43b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Doxygen complained about "Unsupported xml/html tag <user> found".
Make the correct indentation to signify a code block, since it is
indeed a code block. This gets rid of the warning.
Change-Id: I78ea7709f1d45b2ff48c86153151d4f71a41d1e3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Doxygen complained about @defgroup not closing. Fix it by moving
code around, as doxygen was confused by all the #ifdef-#endif.
Change-Id: Iacc2e983cc82b0dfcaaea423ff64bdcc4db8577f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The dir/file names in .gitignore are relatively to the root
of the git tree, so amend it.
Change-Id: I532b3fae4f66590fb34555dd8407576f1e27f744
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The @file tag should follow by a file (or nothing for current file),
instead of file description. Fix it by separating the description.
Change-Id: I1944b164ebe420fbdc03fc65b314ac53493a5d2c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The @file tag should follow by a file (or nothing for current file),
instead of file description. Fix it by separating the description.
Change-Id: Iabe3550568cdfdda6ad71be6fab3e8b5dfbeb940
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Use \p to refer to parameters instead of using "@" which
doxygen complains.
Change-Id: I0e8384084497f422ea635caf656ae4a8b06fde94
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The param "pwm" is not in the argument list of pwm_all_set_phase().
So remove it.
Change-Id: I960b5b42de33edc4a6216fb5a65e0f1352bd637d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Note that the failure case can only be reached when compiling
for ARC side of Quark SE. Otherwise, the code is never compiled
which reduces code size for other platforms.
Change-Id: Ic76890cbaf22da5c3563e056cba9b39615d3da0c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Note that the failure case can only be reached when PCI is enabled.
Otherwise, the if-block is always false, which reduces code size
for non-PCI platforms.
Change-Id: I71656468eaee702bc481f5fbd490677b7bc491c1
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Note that the failure case can only be reached when PCI is enabled.
Otherwise, the if-block is always false, which reduces code size
for non-PCI platforms.
Change-Id: I1f9def66b2ce7f08fc13b8f03e675ce4cd469e6d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Note that the failure case can only be reached when PCI is enabled.
Otherwise, the if-block is always false, which reduces code size
for non-PCI platforms.
Change-Id: Ib98b78a75cc2a5f124e67f32f2bf82960a963aec
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This converts the pinmux/dev drivers to use DEVICE_AND_API_INIT(),
since the driver_api assignment will never change.
Change-Id: I0063b19e2afe932e1daf3255e718455aaa200ff1
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the DEVICE_AND_API_INIT() macro to take in a parameter
to assign to device->driver_api. This eliminates the need to
assign to driver_api during runtime device initialization.
This provides an alternative way to declare devices. This should
save a few bytes in ROM for those devices that will never fail
initialization (in other words, never need to manipulate
driver_api pointer at all).
Also clean up the documentation a bit to remove duplicated
block of information.
Change-Id: I6abed1abe75db2e8babfcf1ecf590491132a5543
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Enables to get right channel reference on both connection transports,
LE and BR/EDR.
Change-Id: Ia577963132e3a600cd9a95b90f218a5bffee8e58
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds the missing @ingroup for counter API so it appears
under device driver category.
Change-Id: I763faab802d3a6453ab46ee969b5ffd082282f1d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The L2CAP reject command can now be propagated over both connection
transports, LE and BR/EDR.
Change-Id: Ie8466490ed205e194a586646f496ebfce5ceea70
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Primary and secondary service attributes discovery uses att_find_type,
include service and characteristic uses att_read_type.
Change-Id: Ia3539b446a4afb5c72bc1aba443167be6f893d0d
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
With this patch net_buf based heap will be used to store attribute
user_data and UUID. This is the first step to remove gatt_buf.
Change-Id: I578f26b781e01f5f3464c05f7210dc27cdea8edf
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
We have not found any use-cases for dynamic IRQs where a static
IRQ did not also suffice. Deprecate so that we can eventually
remove from Zephyr and nontrivially decrease the complexity of
the kernel.
Change-Id: I509655371773aeaca7d01134dd850eb4cd95f387
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This mechanism does not add enough value to the kernel to be worth
maintaining it. Drivers that need deferred processing of interrupts
can simply define their own task and have the interrupt handler
release an event that the task waits on.
The API is marked as deprecated and it is removed from unit test
coverage as well as the documentation.
Change-Id: Ib87b91cb41e9b6d7fdf0dc62b240a531b6a8889f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Most iuts data base are intended to have its attribute database builded
in sequence and its constant (except attribute values, parameters,
permissions). Patch allows btp specification to cover also devices
which cannot assign an ID right after issuing add attribute command or
set attribute component (which points to defined attribute ID).
Change-Id: Ie8e5ed223609cca2b6e3fb8444065f33b1408142
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This fixes conn->gatt_private = NULL pointer dereference that occurs
in the next Read Blob Response, here:
/* TODO: Get params from user_data pointer, not working at the moment */
params = conn->gatt_private;
Change-Id: Icf280c856133a4c91fc10475d3a047809f917f46
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This allows to accept or decline incoming pairing that would
otherwise result in JustWorks pairing.
Change-Id: I759ea067ef298b437e0112b8b7ef3bedf106dc52
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
GPIO is not needed for quark_se_devboard for now when dealing with
NBLE.
Change-Id: I0dedf2bee0af153e1d6e224d90f4662f5601b2b7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
