Align the sample and its documentation with the other basic samples.
Adjust the fade algorithm so that it looks better and takes less time
to verify by taking 2.5 seconds instead of 10.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The difference between "blinky" and "blink_led" is not clear.
This rename makes it more obvious that "blinky_pwm", well,
blinks an LED using PWM.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Align this sample's source code and documentation with other basic
samples.
Adjust the logging configuration and output some additional printk()s
at startup to make it more obvious that initial errors are device
specific and related to calibration.
Fix the period calculation logic so the sample does not stick at the
maximum and minimum periods for two consecutive four-second periods.
That is, instead of setting the pin period to MIN_PERIOD_USEC twice in
a row, do it only once before doubling again, and similarly for
max_period.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up the code and fix the documentation, which is out of date and
still refers to information from the days of board.h.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The driver-specific config_info structure referenced from the device
structure is marked const. Some drivers fail to preserve that
qualifier when casting the pointer to the driver-specific structure,
violating MISRA 11.8.
Changes produced by scripts/coccinelle/const_config_info.cocci.
Some changes proposed by the script are not included because they
reveal mutation of state through the const pointer, though the
code works as long as the driver-specific object is defined without
the const qualifier.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Drivers cast the device config_info pointer to a driver-specific
structure. The referenced object is const-qualified; make sure the
cast doesn't inadvertently remove that qualifier.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
These have been removed from the tree. Warn out of tree users about
support for them eventually being removed entirely.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
File system support is built into the Bluetooth overlay, but can now
also be enabled independently for other transports.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Tests should always start with test_, otherwise detection of subtests
will not work through sanitycheck.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the hal_nordic module revision, so that the following commit
becomes effective:
nrf_radio_802154: Use chosen zephyr,entropy to get entropy device
Use the label property of the node pointed by "zephyr,entropy" chosen
entry as the name of the entropy device to bind to. The pointed node
does not necessarily need to be a "nordic,nrf-rng" compatible one, what
was incorrectly assumed when CONFIG_ENTROPY_NAME was replaced in commit
5505d0baa66a89848f643120fafad232876df695.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
At present these can be very long since they include the full path of
the filename with the error.
Assertion failed at /home/sglass/cosarm/zephry/zephyrproject/
zephyr/tests/drivers/flash_simulator/src/main.c:102:
test_write_read: (0 not equal to rc)
Reduce the length by omitting the current directory (where the tests
are being run) from the output:
Assertion failed at tests/drivers/flash_simulator/src/main.c:102:
test_write_read: (0 not equal to rc)
This improves usability for people running tests locally.
Signed-off-by: Simon Glass <sjg@chromium.org>
With this change, the spi transceive with dma function
waits for the spi busy flag reset and for the dma transfer end.
Then it reloads the channels until all buffers are consumed.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This change avoids the reload of the dma channel
in the callback function, just sets the corresponding Tx, Rx flag.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fixes: #24692
This commit fixes an issue where FindPython3 could wrongly select the
Python version not in environment path.
If user installed both 32 and 64 bit versions of the same Python, for
example 3.7.x, the current search would only specify that 3.7 is needed.
In some cases, FindPython3 could select the 32 bit version, even if the
64 bit version is the one on %PATH%.
This is fixed, by setting Python3_ROOT_DIR to point to the tested Python
in %PATH%.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Default values were fixed in the code. Moved to Kconfig to allow
customized configuration. Custom configuration may be used to prevent
line breaking injected on terminal width.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Update to new timeout api. Without this change UpdateHub don't build
anymore.
Fixes: #25230
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Fix Service Changed configuration stored in flash not deleted in flash
when calling bt_gatt_clear from bt_unpair.
When clearing the check for "is bonded" should not be made. If the
bond information is already removed this check will fail.
When clearing the check for "modified" should not be made, clearing
is in itself a modification, and should always be made.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix CCC cfg not cleared when overwriting oldest bond. Calling
bt_unpair with a pointer to the key will result in the key addr being
memset to zero and bt_gatt_clear is called with an zero-set address.
This happens because unpair (hci_core.c) calls bt_keys_clear before
calling bt_gatt_clear.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit updates USB audio class implementation with
DT changes introduced in 7e0eed9235. In particular rename
DT_NUM_INST to DT_NUM_INST_STATUS_OKAY.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
The Atmel SAM D21 SoC, according to the original Atmel datasheet
(Atmel-42181N), has 28 interrupt lines (0-27).
There have been mysterious changes in the number of interrupt lines and
on-chip peripherals in the recent Microchip datasheet releases, but
there is no explicit information available for this (e.g. PCN), so we
take the safest approach by assuming the lowest interrupt line number.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Reduce the system timer frequency on `atsame54_xpro` to prevent timer
from ticking while measuring average context switch time between
threads.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Make it possible for an application to set CONFIG_I2C=n if it wants.
The unconditional select was making this impossible due to resulting
unmet dependencies.
This is also in line with what some other SoC definitions do with I2C.
Fixes#25204
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Include documentation for CVE issues that are now out of embargo. This
includes links to the CVE database, as well as referencing the PRs
within Zephyr that fix these issues.
Signed-off-by: David Brown <david.brown@linaro.org>
This should fix an issue with setting labels. A label was renamed and
ci-tools did not handle the error.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The commit b7e363661d added an additional
busy wait call in the `busy_wait_thread` function -- effectively making
the minimum time required for the thread to exit twice that of the
original implementation.
This commit updates the busy wait thread completion timeout to reflect
that change.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Fix compilation of the I2S API tests with the new timeout API.
Remove the defines for sleep periods and embed them directly into the
code to improve consistency.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The semihosting console test (`drivers.console.semihost`) is currently
only supported on the ARM Cortex-M QEMU targets.
While running this test on real hardware targets is possible, there is
no standardised way for sanitycheck to validate its output, so we
filter by `CONFIG_QEMU_TARGET` to skip running it on non-QEMU targets
(including physical hardware targets with `--device-testing`).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Make sure that we have proper network interface which support
VLAN and LLDP in this sample.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use a complete identifier, first two parts are section.subsection, then
at least another part for the specifics being tested.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
