The function gets 32bits wide data, converts host order to little
endian and then puts the data on protocol stack to be send.
Change-Id: I29e4040b302a16b551a0922133c327ff694fec5d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Remove the homegrown sensor delayed work API in favor of using the
system-wide workqueue. Drivers still have the option of using their own
fiber.
In a second step, drivers can be refactored to start and use their own
workqueue.
Change-Id: I70dea6fc2abcbc9e04ac1ed3c837483a3d3c4424
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Add a generic API for drivers to start workqueues and submit work
items. This is needed by drivers which need to schedule code that might
sleep from an ISR to run in fiber context.
Also add the option to start a system-wide workqueue.
Both additions are optional. They can be deactivated for systems that
do not need them.
Change-Id: Ia843568fde5daf6d4279ef7bf241c26c1e3dcfb7
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Call bt_conn_security() the same way it is done in upstream code for
NBLE. Currently use BT_SECURITY_MEDIUM as default sec level.
Makes at least following cases pass:
...
1/6 GATT TC_GAR_CL_BI_05_C PASS
2/6 GATT TC_GAR_CL_BI_17_C PASS
3/6 GATT TC_GAR_CL_BI_22_C PASS
4/6 GATT TC_GAR_CL_BI_27_C PASS
5/6 GATT TC_GAR_CL_BI_33_C PASS
6/6 GATT TC_GAW_CL_BI_06_C PASS
...
Change-Id: I2a0c177a187db931e88e2f82a5bda1c0cc04a112
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add driver for the Grove Temperature Sensor which measures ambient
temperature.
Sensor reference page:
http://www.seeedstudio.com/wiki/Grove_-_Temperature_Sensor
Change-Id: I4f56224be5fa7a968749d5d4df8cb99a462c3c21
Origin: original
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Add driver for the Grove Light Sensor which detects changes in ambient light.
Sensor reference page:
http://www.seeedstudio.com/wiki/Grove_-_Light_Sensor
Origin: Original
Change-Id: I88ae20cc9faa8ab8f274b0bd7a114db5c1a87a91
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
We had wrong logic and confusing config options for debugging
Quark SE sensor subsystem. The new option will be used for GDB
debugging. The existing DEBUG option will be used for printing
additional messages on the screen while booting the sensor
sub-system.
Change-Id: Ia54d22e872edafe531ccde271e7504fe9c48a73a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Using ARCH variable to select different configurations for the different
architectures is misleading and conflicts with the variable ARCH being used by
the build system. The variable is not needed, it is application specific and
an application can be built without the need to specify ARCH on the command
line.
This is yet another item specific to samples and test cases that
wrongfully being used and documented for every application. We need to use
another variable and just make it clear it is specific to samples and how they
are written. One possible solution is to have a script that gets the
architecture based on the board being used. Attachments
Jira: ZEP-238
Change-Id: Ieccbc087a41858fb96fb361c0aaa04705e968a4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Moved comments from code to header.
Jira: ZEP-160
Change-Id: Ifd0f3c930289256e682b5941d77433aca3d3f941
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the same Kconfig infrastructure and options for all SPI drivers.
Jira: ZEP-294
Change-Id: I7097bf3d2e1040fcec166761a9342bff707de4dd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most of the values are SoC specific and come from the SoC definition,
not need to define them in Kconfig.
Jira: ZEP-294
Change-Id: I962ce36b7e2361ea77ae4178bb7c86c19a241c4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Most of the values are SoC specific and come from the SoC definition,
not need to define them in Kconfig.
Jira: ZEP-294
Change-Id: I7688ca523915e3fa8a1d28dea7a1d84a66b39d56
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds a notify_le_param_updated function to call registered
le_param_updated callbacks with new connection parameters.
Change-Id: Idd660f7ca024c2f7712a6a41a51db77e4fc82a00
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This issues connection parametrs update on new connection event,
to mimic Zephyr stack behaviour.
Change-Id: Ic3fa86a02ff9a5135a026dfff6d2fbfb890656c1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds implementation of bt_conn_le_param_update function.
Connection parameters can be only issued while in slave role,
because, nRF51 supports this procedure over L2CAP only.
Closes ZEP-222.
Change-Id: I2bb5f718b60b8be279f333c9721629662c029a32
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Use appropriate scope for 'random' and remove unnecessary empty lines.
Change-Id: Idb8d527fa0a88ca738e91887b56a123a5a8831ce
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
on_nble_gap_conn_update_evt gives information about new
connection parameters. These shall be stored in conn.
Closes ZEP-222.
Change-Id: I69e36136cfae98821b1f5467c72c94dbc6f1d10f
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This function will be used by bt_conn_le_param_update to validate
parameters.
Change-Id: Icd60d74dae3bf467af4b7277d1516b978ba937a5
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
According to the data from nble_gap_connect_evt,
role_slave is "0 if connected as master, otherwise as slave",
so to be consistent with our API, this shall be mapped to
either BT_CONN_ROLE_MASTER or BT_CONN_ROLE_SLAVE.
Change-Id: Icf31ef02ea178e04cb28b2611e09b06c23f49704
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Separates LE and BR/EDR L2CAP signal channel context and starts accept
incoming PDU traffic on BR/EDR signal channel. For now all valid L2CAP
commands are send back as rejected on BR/EDR signal channel.
Change-Id: If4392b2d3ccbe157cb7eeafcaa0804e90f44e2be
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
It is valid to call set_ad with NULL data as long as length is 0.
Improve code comment for unusual condition check explaning why it
is correct.
Change-Id: I29440fb04747f6df06dc4df466eb43e160ff3be4
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Adds implementation of the BR/EDR connection L2CAP notifier. It makes,
for each registered BR/EDR fixed channel, basic validation and channel
initialization using two local helper functions.
Change-Id: I6393a43b25ff0d9f23deaf93562add08861ea1d2
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Moves, specific for BR/EDR transport, register fixed channel handler
to l2cap_br.c file and make it local. Then using it register BR/EDR
signal channel (CID 1) context during channel layer initialization
in 'bt_l2cap_br_init'.
Change-Id: I5e23fc5d43ae3d7838ecb44ad4fa631eccc8cb4c
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds dedicated function informing L2CAP layer about established BR/EDR
connection. Existing 'bt_l2cap_connected()' connection notifier is
refactored to use new API 'bt_l2cap_br_connected()' which is implemented
in l2cap_br.c file.
Currently the new handler is just stub since proper internals of
BR/EDR L2CAP signal channel management are not yet implemented
in l2cap_br.c file.
Change-Id: Idef9be63338c6bb4b3315ec0452d84f2431fbaa2
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Moves initialization of signal buffer for BR/EDR transport to
l2cap_br.c unit and removes existing references to signal buffer in
l2cap.c file to prevent compiler complains.
Change-Id: I784b926df814e632944f3a12b0b6d03d144d2438
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The stub label is created with ISR and IRQ number since the same
ISR can be used by several IRQs
Change-Id: I0ea909fddbce7a70c754befd095b7a3b36fffab4
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
Added CONFIG_KERNEL_EVENT_PROFILER_DYNAMIC flag for enabling that
capability. When set, nothing will be logged by default
Change-Id: I03552483e5a6bfd9e2505eda56908f0d0ae98618
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
OS tick period (usually 10 ms) is not sufficiently precise for task
execution analysis (like processing CPU load per context)
With that modification, the timestamp used by the kernel event logger
is 32-bit LSB of platform HW timer (for example Lakemont APIC timer
for Quark SE).
This timer period is very small and leads to timestamp wraparound
happening quite often (e.g. every 134s for Quark SE).
This wraparound must be considered when analyzing kernel event logger
data and care must be taken when tickless idle is enabled and sleep
duration can exceed maximum HW timer value.
Change-Id: Idc545da8f828a7357a69d83ff25c9afd09dab3c4
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
IC_CON_SPEED_MASK isn't used, but I see it was defined wrong.
It should be a 2 bit mask.
Change-Id: I1003ae13b831ff481574bcf956daf2c54dbe7e47
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The function i2c_dw_isr() in this file appears to have the wrong
decl for the IRQ_CONNECT macro. It should be: void i2c_dw_isr(void *arg).
Also, at the 2nd use of IRQ_CONNECT there was a variable created
and then marked as UNUSED. I've removed this.
Change-Id: I3f2c4ecb5c13147d577c82a0ec4fe486ae38a475
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Added default value for min-conf-desc-length = 1 for kconfig help.
Jira: ZEP-303
Change-Id: Ieab66a5cb76e2ab8dea4e80b056600173c333c01
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Add a way of finding if a microkernel task is the idle task instead of
of duplicating:
task_priority_get() == (CONFIG_NUM_TASK_PRIORITIES - 1)
which could be subject to change.
Only available for microkernel, since there is no such concept in the
nanokernel.
Change-Id: Ie8930981f1a2ac5ff16f905f4eb4e333c8b59c5d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Update openocd configuration file allowing to flash with make
flash for the majority of boards. Old versions still might be flashed
with zflash. This also helps debugging boards.
Change-Id: Ie9701c09e1806e0c4de39f95bd34bce9f66051cc
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
