If the CPU lacks certain features the only writable bit in the
status register is the PIE bit, so just write the saved value back.
Change-Id: I91537ff640aa9977d19587c4b0ae414028752341
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
No longer necessary as all the stubs which didn't use their
parameters have now been implemented.
Change-Id: I0ab3f024431426fbdac6d17de21e9c7338879f6e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A recent change modified the fiber stack size of these tests
to 256 bytes, which causes a stack overflow on Nios II. (This
arch has lots of registers)
Increase to 384 bytes, which still compiles well on RAM-constrained
targets like Quark SE SS, Nucleo, etc.
Change-Id: I2152ea9fc1fac693638b8f7a00a6b6628e0c42d3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The return value of _Swap() is often treated as a "don't care" value and thus
often ignored. However, there are cases when it is desirable to have a
meaningful return value. This meaningful value can be assigned via
fiberRtnValueSet(). To that end, a new field has been added to the coop
register struct to store this value for when _Swap() needs to return that
meaningful value.
Change-Id: Ic4967fa7d602850c09ebde18e8bfd4c97cda9ec8
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is used in many other test cases. However when implementing this
function it's helpful to have a testcase dedicated for it, without
dependencies on other kernel objects.
Change-Id: I66a7cdd0b13712665384d5ad4e79050c82d32e3a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For this implementation, the presence of a value in global
_offload_routine signifies to the exception code that we should
enter the IRQ handling code even if there are no bits enabled
in ipending. The 'trap' instruction gets us into the exception
handling code.
Change-Id: Iac96adba0eaf24b54ac28678a31c26517867a4d2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We check to see if the stack pointer is somwhere on the
interrupt stack.
Change-Id: Ic9d21e9f03476b9c8955c44cbfa2e61dd1daed22
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This new target works much like 'make qemu' but fires up a local GDB
server on port 1234 and pauses execution
Change-Id: I87fd174c66dcc9f2f43b5b1204cc5c34f741622d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Not all CPUs implemement the mul, div, or mulx instructions. Ensure
that any runtime handling of these works correctly.
Change-Id: I50426bd5704cd913f290c9677d1760d53c9e4b56
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds flags parameter to write callback which can be used to indicate
that data only need to be prepared with use of BT_GATT_WRITE_FLAG_PREPARE
fixing qualification tests that needs to check authorization or other
errors that cannot be verified with just the permissions.
Change-Id: I3d662b2027718ffb52a280e3bbc9750be14f89ae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes it easier to document and more aligned to other parts of the
API that do make use of bitfields.
Change-Id: If1ff89d653537d854a4f788bf845d2ab6fe5bc23
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the regression of included services in nble.
Because user_data of BT_GATT_INCLUDE_SERVICE points to the first
attribute of service to include, and the bt_gatt_attr_read uses
memcpy, the pointer to pointer is needed to copy the address contained
in user_data to the buffer.
With this patch, included services work on nble as well as Zephyr.
Change-Id: If360014675c399fafc365185d5c1e41c913c8109
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
BT_GATT_INCLUDE_SERVICE user_data shall point to the service declaration
of service to be included. So user_data_len shall be set to 0 to avoid
copying the contents of bt_gatt_attr to the server_buf, and just use
pointer to the actual attribute.
Change-Id: Id770daeb6d64644c51f2bc5d3962dd80363ec8c3
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Add HRS simulation to shell allowing to switch on / off HRS simulation
helping testing GATT notifications.
Change-Id: Idf99b74ac73d45d2f0d3279d50431be4027fef8a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
ip_buf_sent_status is only available for TCP, but uip_send_udp is only
called for UDP. Remove the else block.
Change-Id: I9695b33f975042ec15fde718d91ab901617437f2
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
When udp_packet_receive is called, ip_buf_len is set 4 bytes too big.
This ends up with the client program receiving 4 bytes more than the
board actually received. Initialize it correctly alongside other values.
Change-Id: I0012aa7e8c6a440a618dfa03c4fdc2b898d592fc
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
This way it is easier to understand what bits are being set.
Change-Id: I17cbcc8adcbacb32d20142b557060759e5b7cd81
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
attr pointer is local here, so it may be overwritten anytime, because
this attribute user_data will be used out of scobe of this function.
Change-Id: I85b390299980dac213d8ce1939078fe8b242c887
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This makes the code be a bit clearer by letting it specify a more
descriptive value than '0'.
Change-Id: I2e6b46f0924581d0d13f13479aa15170cc9e0e70
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Applications or higher level profiles that are not part of the core
Bluetooth stack may need an easy way to generate random numbers. Since
we already have an internal helper for this export it for others to
use as well.
Change-Id: I29af7cab30ad8f60d481bc847984e781eaecd6bf
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fixed resources leak in pTable when the lseek command
fails.
Change-Id: I414276399b0d0ca3dee0c18d307ccc2035d66198
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Adds L2CAP configuration response protocol definitions to be able handle
response from remote in reaction to issued local request to exchange
MTU. Current optimistic path of configuration initiated from local
assumes to set MTU contract in one iteration.
Change-Id: If86d96b37e9cd888ad10a624a79c864a137e027d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Triggers conditionally outgoing configuration request to start exchange
MTU just after incoming PSM connection request was aknowledged by local
host. If local MTU differs from default (672) add MTU option in request,
otherwise send empty configuration meaning default is wanted.
Change-Id: I4eb382cc496345c051967640422e926f595ce854
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds to BR/EDR L2CAP client channel object required handlers and allocate
room for channel data traffic to make it operational when fully
setup and to be interactive with internal stack.
Change-Id: Id1e90d7ea318ed8a875383995e4d175e124939eb
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Status shall be stored to be returned in the response to the
on_nble_gatts_write_exec_evt.
Change-Id: I03172e4b8833f83bd9b60f10d3cb52a067cc9f34
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
FIFO object has to be initialized before being used.
Change-Id: I3bd774f60e2585d09cfba657cb2aa50c95e0c2f5
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
These are no-ops since this is not an arch that isn't byte-
addressable.
Change-Id: I09b0fd8b8d85f67bcca2dcb6ebc35843c19afa45
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Required by microkernel, currently does nothing.
Change-Id: I256886e3a52817d9216599bbf5691bc27c1d0ad8
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Per Altera these files for the /F core are freely distributable.
README included with instructions and links to necessary software.
Origin: Altera
Change-Id: I58c0dbcb5a2b11f0845d4e390e6aa0020d8b3ed5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fixed group end and undefined refs.
Change-Id: Iad0ab7b0dd858955d95f298a772d8d84bb4ee1c9
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Tickless idle is not yet supported. We program the timer period
to the desired system clock tick rate (sys_clock_hw_cycles_per_tick).
This was renamed to the same name used in the Altera Embedded IP
Peripherals Guide; used by other CPUs than Nios II.
Change-Id: Ic4fca8c16b923295b77b63f98f45cd3483c5f560
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
uart_register_input()'s signature changed with the addition of a
callback. gdb_server.c was never updated so now the compilation fails
when enabling the GDB server.
Fix by setting a NULL completion (as seems the code would not use it
anyway).
Change-Id: I4c0df65a31bd906db704f7f4a564e7d6f065aae7
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
supported_features_cmd is a string which part of is added based on a
However, the semicolon to do so was being only included if the #define
was there; if not it was generating a syntax error. Place it out of
the #ifdef block.
Change-Id: Idd7e80519719b5ad432971e758a05546df8a89e2
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
If conn is not in BT_CONN_CONNECTED state we get extra reference.
Change-Id: Id78db628e776576ea120bda08e3f906c221015c7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Global data and device setting can be messed up by concurrent
API calls. This change is to serialize the access.
Jira: ZEP-454
Change-Id: I520722aecab7db443d053fd45498a22e165889de
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add some macros that drivers and applications can use in describing I2C
clients.
Change-Id: Ic7af97804e88ed3b9d4f68f9ac358a425f4cc17c
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Define some configuration structures and macros that can be used in
device configuration. These usage scenarios are as follows:
* device drivers will use SENSOR_DECLARE_* macros in their device
configuration structures and SENSOR_GET_* macros in the init
functions;
* application code will use SENSOR_TRIG_* to fill in the device
configuration structures.
Change-Id: I3a897999175b14a4cd1111da4c26434741294e52
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Add DMA shim driver based on QMSI 1.1
In order to enable this driver, the following options must
be set.
CONFIG_DMA
CONFIG_DMA_QMSI
Jira: ZEP-354
Origin: Original
Change-Id: I604cbf34e90f7653b956a6e4d428424beee3ef87
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Using macros does not let the compiler verifying about the type we are
providing, which usually give an error easier to understand.
Also, this will let the compiler deciding how to actually optimize
(inline or not) the code.
Change-Id: I17fb1f5a1c1854461fad101bbb40c9be33844c8b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is a workaround until we can modify the kernel to pull this
value out of system.h instead of Kconfig.
Change-Id: Iaafa9003d2bbcb5b38a050c371466a206f716ae7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
