At some point these were moved to include/drivers/
Change-Id: I5130a4d48b3bbff6ab03b6103bec0f53d88deb7b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
0 should be fine; no need to make this an FIRQ or non-maskable
Change-Id: Ifdf89a72e4864a2c2bbd83752cd814e2cb9aa16e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Replaced the term "platform" with "board" or "SoC" depending
on context as per, ZEP-534.
Change-Id: I14c13d4eed429fe6e41e2221d6ff6afe97e942eb
Signed-off-by: Evan Couzens <evanx.couzens@intel.com>
Disable tx fifo empty interrupt at the completion of a receive
transfer. If the API caller does not send "STOP" at the end of
a receive transfer, unnecessary tx fifo empty interrupt will
come one by one endlessly.
Jira: ZEP-556
Change-Id: I54739459dfab81c28713f6a3c77789e7903bb7f9
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Incase of slip or ethenet use, if these is too much incoming data
current buffer count is not sufficient. Noticed with TCP client
and server example. So increasing it to avoid not enough Rx buffers
issue.
Change-Id: I6eef51c28c7c4751955aa4403122bf17d55ce12c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We are also seeing qemu failures in the synchronous wakeup tests,
where the fiber should be resuming instantly but in practice sees a
one-tick delay due to the emulation environment not being
deterministic. Allow one tick of slop in those too.
Change-Id: Idab7c45ea0b10bd955b90a98d3884b5fe0571187
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fix i2c failure while multiple slaves are connected to the
same i2c interface. Higher load on the i2c bus makes i2c
signal less nice. The requirement for signal ramp up and
ramp down time needs to be loosened.
Jira: ZEP-646
Change-Id: If698d7ba741788857694f166ecc602c2a94cb12e
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The app has updated the text it prints (which we were looking for) so
this was causing a false negative.
Change-Id: I3223a0dec8e44b0f89caf73626ffff82d74ab24d
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The per-platform blocks were just specifying defaults and didn't
need to exist.
Change-Id: I9f4c7db4cd16417d5a2c172c3f850f7758dcbd00
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The GPIO and UART drivers were failing to build due to some
missing soc.h defines.
Change-Id: I6811e3699449da0a61ccc8376a8e11b96ad7a4e5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The eventhandler gets called with NULL buf, but it can't handle it. Add
a NULL check to prevent crashing.
Change-Id: Id16c2aa093a145e0442dfc61dd0b6e1b81b701f5
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
README files are updated to include information about the
warnings displayed by the compiler.
Applications affected: DNS, NATS and MQTT.
Jira: ZEP-681
Change-Id: I482c3bbf37c5d9af3bb43b7ef5e58957bac2852a
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
We map legacy and SSP link keys to equivalent security levels so there
is no need for storing if key is legacy. This flag was never used
anyway.
Change-Id: I6867f43a1ed132f67a564de34436cf83b922a138
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need to ifdef type definitions and whole file is already
under (CONFIG_BLUETOOTH_SMP) || defined(CONFIG_BLUETOOTH_BREDR).
This improves file readability.
Change-Id: I9bcceb01023f75e016ad71873f87b3393a09fe26
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Add a Kconfig option to select between the Hard and Soft Float ABIs. We
also default to the Hard Float ABI as this is what older SDK versions
supported.
JIRA: ZEP-555
Change-Id: I2180c98cd7556ab49f5ca9b46b31add2c11bd07b
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The data sample registers are ordered as X, Z, Y (not X, Y, Z), so the
driver also needs to extract the sample components in this order.
Jira: ZEP-679
Change-Id: I317994bb545539b049e2ebf3d2af94e63c7d2511
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
This was merged prematurely.
This reverts commit 758355779c.
Change-Id: I19d27df0b9ea9acf49382d27b5ef6ce49b915542
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The parent commit for this was merged prematurely.
This reverts commit d38208b977.
Change-Id: I4f05f303eac7bdf176fb0522e30eabb839602b25
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Disable tx fifo empty interrupt at the completion of a receive
transfer. If the API caller does not send "STOP" at the end of
a receive transfer, unnecessary tx fifo empty interrupt will
come one by one endlessly.
Jira: ZEP-556
Change-Id: I311aba843e28685e8cca36733ac3f1e09b70d900
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Correct an error in ADC Kconfig. The # in the beginning of
the code lines unintentionally commented out the "if" condition.
Jira: ZEP-645
Change-Id: Ieee1bdbf4865fc39aef9a0986036fd81a75e5b58
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
On some hardware (Qemu) the timer guarantees aren't honored as well as
we like, and these tests are observed to spuriously fail in practice
(e.g. CI testing). Allow for one tick of slop when testing sleep
durations.
Change-Id: I4b694c0a9ddfc1ee48510fa5deda2bb31499debf
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This reverts commit 15c1fed5b6.
This workaround is no longer needed as it was verified that pairing
succeed without it. Also I'm no longer sure if initial pairing issue
was due to missing bit in key distirbution field or if it was due to
iOS already had device with this address paired (ie removing device
bonding from settings application fix the problem).
Change-Id: I6d69b9afb04afc83139d57d2dffe1b62d40afe5b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
We should prepend CONFIG with macro name, otherwise it is not possible
to enable debug.
Change-Id: I9a4ec4da7607c6bc9894eecc42fe7c4556b62c6b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
etimer_expired will return true only once. This means periodic timers in
the netstack won't get to run since etimer_process calls etimer_expired
for all timers in the stack.
Jira: ZEP-475
Change-Id: I28da638789b0604f9dd0a0598a7fa590e6b0a746
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
NET_TESTING_USE_RFC3849_ADDRESSES not defined as a Kconfig option.
Enable this in Makefile like this
ccflags-y +=-DNET_TESTING_USE_RFC3849_ADDRESSES=1 incase if you need
it.
Change-Id: I96b05d069cf5baa56cc27489b3c38b84412eec97
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Update the comment for spi frequency. The QMSI shim driver
only accepts clock divider.
Jira: ZEP-461
Change-Id: I4d89a3810b002d594b0c10bf6d33544b7549191f
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The event logger nanokernel sample application spawns
application fibers and system fibers. This commit reduce
the application's fiber stacks to reduce the global
application RAM footprint and allow it to run on smaller
platforms like Quark D2000.
Jira: ZEP-526
Change-Id: I98f899892e5c5d8ce84f97f6768444cf67277a1a
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
the traverse step length should be sizeof(struct uip_udp_conn)
in uip_process when matching the right uip_udp_conn for net_buf
Change-Id: I33c0499582a96e5031ba94f147ff2376726b3f9c
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Added rule to ignore net/ip/contiki content in the checkpatch style.
Change-Id: I06d8575d2a00d0032099c8a6d804fef3aaad8381
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Zephyr's MQTT does not implement a client's message queue.
So, a race-condition may be present when multiple messages are
received and processed.
We remove the pinreq function call to allow the mqtt_read function
to handle all the incoming messages.
CONFIG_IP_BUF_RX_SIZE is also updated to allow more messages to be
queued by the IP stack.
Jira: ZEP-669
Change-Id: Ie3ef55b17020e04c6540adf975a66fb004933914
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Use the goto statement to create a common exit point.
Remove redundant code when possible.
Change-Id: I2e22483c6fca4cb501b401164faf97d585ecec3c
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The previous version of the pingreq handler function leaves
the semaphore blocked if an error condition is detected.
This patch solves the above described situation.
Change-Id: I4897609fae3f6523244892ae38ffdc5ae85f852d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Sanity check script was not handling non utf-8 characters as a result
it crashed and didn't kill qemu and test used to hang.
Now tests fail upon untranslatable bytes.
JIRA: ZEP-673
Change-Id: I885a185e0481083501fce15cd51412bfdd26a7d7
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Once again, broken commits have been merged with incorrect author
information. Fix this in .mailmap.
Before this patch (git shortlog):
viggo.jf.intel.com (2):
doc: Move code contribution info to wiki.
doc: Move code conventions to Zephyr wiki.
After the patch:
Evan Couzens (2):
doc: Move code contribution info to wiki.
doc: Move code conventions to Zephyr wiki.
Change-Id: I382c06b49fdc5f6c81bc9ec952c5958b4e1ca144
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
net_context_get will obtain ip addr from uip_hostaddr when the local
ipv4 addr is set to INADDR_ANY. So local_addr->in_addr.s_addr[0] is
represented for the local ipv4 addr content.
Change-Id: Ie6d77f27bdde5ea8568428a61b129eccb253df0a
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
The previous version of the DNS Client sample code assumes a
little-endian machine as a target. In this patch we use the byteorder.h
functions to handle the cpu to network order conversions.
Theoretically, this code must run on little and big endian machines.
Cosmetic changes are also applied to other files.
Change-Id: I2b47f6252fa070e0a0253666fde1785530d6aebf
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
