Fix the use of BT_DEV_KEEP_ADVERTISING and BT_DEV_ADVERTISING
so as to permit multiple peripheral role connections if the
controller supports Bluetooth Spec. v4.2 LE Topology.
Change-Id: Ia363181754cb788c13e9050e5fe5416201593c07
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Place common code in hci_evt_handle() so as to avoid code
duplication in the handling of command complete and
command status events.
Jira: ZEP-726
Change-Id: I35ffcb63518b52a2b209f83ef6b8bbb1d1b4a849
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Handle all instances of an unknown OCF in a common place
instead of it being spread in multiple functions.
Jira: ZEP-726
Change-Id: Ibd9ebe429754980b243cb8772702cfeb59b0a18b
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Controller implementation supports all Bluetooth Spec. v4.2 LE
states. Include the LE Read Supported States Command in Read
Local Supported Commands HCI command complete returned by the
Controller.
Change-id: I399f7c0326b058577e97e6d8a2676afbeb73b6fe
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Use net_buf helper whenever accessing data by reference.
Change-Id: I3c7eb3af33a3d22741f73c094fb4a39e3e3d3440
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds helper support for handling 32bit UUIDs
Change-Id: I4874b5f092bdbe30039b8031485bf856e4268f2a
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Use stack_analyse in the recv fiber to print actual stack
usage, use this as default in Kconfig option, and declare a
rx fiber stack of Kconfig supplied stack size.
Change-id: Id97ad2de4f7be3069f93271d60544f760abbf575
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
HID over GATT Profile Specification states:
'The HID Device shall use LE Security Mode 1 and either Security Level
2 or 3.'
Change-Id: I2cfc1d9df76b4e8a8b2be7e87d18a7a5f3a19ea8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a sample that implements HID Service peripheral, the current
descriptor map is for a generic mouse so when connecting to a Linux box
it will create a input device like in the following output:
input: Test HoG mouse as /devices/virtual/misc/uhid/0005:1D6B:0246.0035/input/input98
hid-generic 0005:1D6B:0246.0035: input,hidraw2: BLUETOOTH HID v5.29 Mouse [Test HoG mouse] on XX:XX:XX:XX:XX:XX
Change-Id: Iccf07926ecc7363f4f47e1aa9df506a722e7e2d3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a HoG service sample which can be shared with application
samples.
Change-Id: I6893ff409b254d0a616b2ba558fd629ce9edf1d4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds commands to the Bluetooth Testing Protocol for L2CAP.
Change-Id: Ie9ea180c4db62c238ce1450e5714ffd7b0ca2f5f
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The CCC value behind the 'buf' pointer in bt_gatt_attr_write_ccc() may
not be appropriately aligned. It should therefore be accessed with
sys_get_le16() instead of sys_le16_to_cpu(). This also eliminates the
need of a separate uint16_t helper variable in the function.
Change-Id: I93d50f894e877f25ec6ed2f576cf6bf6d440190b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To fully support BT Spec. v4.2 LE Topology use LE read supported
states HCI command to find the supported states in the
controller.
Change-id: I6b4cf4cbefdff44e51bb0a4242e0aef3755f43db
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
This adds UUIDs related to HID Service as defined in the assigned
numbers.
Change-Id: I73e8659546587aa9330bcd7d483bc097448e5ced
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
GCC requires __builtin_offsetof() to be used whenever
sizing arrays with its help. Now that stddef.h
includes conditional compilation, use the macro instead
of hardcoding the GCC usage.
Jira: ZEP-732
Change-Id: Ieb5c694e1dc8323bd1fa2d18711a893f8824c5b1
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Rename nrf51_enable() to nrf51_wakeup()
and nrf51_disable() to nrf51_allow_sleep().
Change-Id: Ie8e8fa2dde281f212e231e0c4b751d3e0021b6b6
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The path refers to a directory so it must have a / at the end to be
identified as such.
Change-Id: I10ca81ff14666d47c1a63ab16b9f18c24cece96f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Profiles uses this helper to allocate net buf, so it should include
2 byte length in RFCOMM header and FCS which will be appended in the
tail by RFCOMM.
Change-Id: I0118eb9b0e0ab1daa9267c165af62bb50f1575d9
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Remove BT_RFCOMM_SEND_RESERVE usage since it will be removed
eventually.
Change-Id: Iada20cf0692ae12996e7ed820601bb77fe47d438
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Intorduces CONFIG_BLUETOOTH_RFCOMM_L2CAP_MTU which sets default as
CONFIG_BLUETOOTH_L2CAP_IN_MTU since it will make sure that RFCOMM
frames can be fit in ACL buffer to avoid fragmentation and at the
same time profiles can utilize the size of ACL buffer while configuring
RFCOMM MTU.
Once fragementation is handled, this can be configured to higher values
based on the profiles supported and its L2CAP PDU size requirement.
The maximum value possible is 32676 which is max RFCOMM frame size
given in the spec.
Change-Id: I57e178ea4da846243067c3e072d1f4c5536a3ee3
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Those are needed only for BR/EDR and in fact was read was never issued
on LE only system due to pages count being 1 in such case.
Change-Id: I8facb77edb9cd03b392034423d8bb261f685b725
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Profiles can use this helper to create buffer which reserves the
headroom for rfcomm, l2cap and acl headers
Change-Id: I22f97b54423d66fe0c133a8e9903b652fb6a6854
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
GATT implementation fixed so that two or more non-bonded peers
can now independently enable/disable notification and/or
indications; and subsequently receive them too.
Change-id: Ifae78297b6ba13f8ea3db58694302bb7f3449e97
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
The most common convention is a space between "config" and the
variable name.
Change-Id: I0f97d5fee56b7db1808dcf07f21016b11f821fa3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Currently set value as 200 since the HFP needs atleast 132 for CIND
response. AVDTP requirement is less that that and SDP protocol can
handle partial responses.
Note that currently only A2DP offload is considered and for non offload
case (which will need a seperate Kconfig anyway) another default will be
required.
Change-Id: Ief0854365ec47baf754b0a657203e1dc93f0d154
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
In preparation for the unification of the code in:
drivers/bluetooth/controller/hci
with the existing HCI definitions in Zephyr,
this change addresses both the required usage of spaces
in the alignment of line components that require matching
the alignment of other adjacent lines and also adds all
missing Bluetooth 4.2 LE commands and events so that the
controller code can make use of them.
Jira: ZEP-726
Change-Id: Iabcee6898a09ddaf4479cfe4ecb0eedc194da8a3
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The Zephyr libc doesn't currently support %zu (it just produces
garbage), so use %u instead.
Change-Id: Ifcaaec79e21f600f00a9336b5267d2d1654adfd7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The lmp_*_capable() macros were neither following the appropriate name
space (BT_*) nor the appropriate style (macros should be upper-case).
Introduce a new BT_FEAT_TEST() macro which gives a clearer mapping to
the feature tables found in the core specification. Each specific
feature test macro is now also named with the appropriate BT_FEAT_*
prefix.
Change-Id: Ia6b18b066927908f9bda646e737e63d46a1d17df
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Controller's fiber is expected to read all enqueued events
and data, hence wait on semaphore only after all events and
data are read.
Change-id: I0150f042b0ba91efa712b38903752b20198e5e6e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Single-mode controllers only have features page 0 (plus the LE
features), so allocating three pages in struct bt_dev is a waste of
space.
Change-Id: Idad73ded12bd153776019d0e5f8adbdb74724845
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Page 0 should be read with the "non-ext" HCI command whereas pages 1-n
with the extended features command (and only if the controller
supports extended features).
Change-Id: I1ddddd367e6883eb83e98983b545f3ffb6159e97
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make is possible to use lmp_ext_feat_capable() both for local as well
as remote features.
Change-Id: I05bb6a25303c0dd2f5e0bbc4f7f412210f668aa3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use Read Local Extended Features command to read local features and
extended local features on init.
Change-Id: I4c8594783895f439af36214881aeff24e116e783
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If P256 Link Key is received in Link Key notification event is should
be marked appropriately.
Change-Id: I09c2f5560d95dd360ef046330e5d85451b02821c
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Make sure that Link Key flags are always synced with key type received
in event. Also make sure that no garbage data is stored in key value.
Change-Id: I06d91da19a7c3497a3051d66f43c0d22f24f5e7d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Adds functionality to do connect to remote PSM. Connecting to remote
PSM other than SDP when both support SSP involves raising security
to at least BT_SECURITY_MEDIUM before any CoC traffic on L2CAP layer.
If connection response is send back with status 'pending' it means
remote doing additional job, so restarts RTX timer. If the command
timer is fired detach the apps channel from connection and make it
ready for reuse.
Change-Id: I81f57bc2f5738754f872ce52cb25027db6db5ccf
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
For power consumption matter, UART between quark and BLE chip shall
be disabled in absence of messages. GPIO NBLE_BTWAKE_PIN is used
from Quark to notify BLE chip payload is coming and so enabling UART.
The UART will be disabled by deasserted NBLE_BTWAKE_PIN signal, once
a message has been transmitted.
Change-Id: If538909784363f415f4266f62be57d8d9ff48b09
Signed-off-by: Jonathan Gelie <jonathanx.gelie@intel.com>
Using the shell application, starting advertisement while
the scanner is already running caused the controller to
assert.
The work which is supposed to set the radio active state to
active is not executed before the radio ISR resets the radio
active state, causing the assert. This can happen when a
newly started role is initialized to setup the radio trx and
the radio start code then detects that its hard realtime
instant has passed (as time was spent setting up the ticker
and ticker then firing thereafter) and hence cancels radio
trx.
Optionally (without this commit), dynamic calculation of
preparation time can be disabled by setting a constant time
in the define RADIO_TICKER_PREEMPT_PART_US in ctrl.c to
avoid the assert.
Change-id: Ib4415ec4b1bfdcc89aa0f3912e5a8fdd2e817fde
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Remove use of (void) before unused functions return values.
Replace use of (void) with ARG_UNUSED for unused parameters.
Change-id: I9ffea666f10dbdc01710df723e0df253a1cdd6e6
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Sets new command in BT shell app to send data to peer
Syntax:
>br-rfcomm-send <number of packets>
Change-Id: Ic795d007a03f657afb833719ae0e800ca0ac6e0b
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Sends the data to l2cap after adding rfcomm header. Profile should
reserve the head room for rfcomm, l2cap and hci headers. Data length
should not be more than dlc mtu.
Flow control is not included in this patch
< ACL Data TX: Handle 256 flags 0x00 dlen 38
Channel: 64 len 34 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Info with Header Check (UIH) (0xef)
Address: 0x09 cr 0 dlci 0x02
Control: 0xef poll/final 0
Length: 30
FCS: 0x40
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff 40
Change-Id: Ib97dbf85e236a5f75fda6037bb75bc6be00b9dc7
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
