During DFU_UPLOAD, the host could requests more data
as stated in wTransferSize. Limit upload length to the
size of the request buffer (USB_REQUEST_BUFFER_SIZE).
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Fix conditional compilation error when enabling
BT_CTLR_FAST_ENC for central only application builds.
Also added additional compilation to code exclusive to
central or peripheral role.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is yet another bug introduced by the move to runners.yaml.
Sigh. I should have tested this better.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This will also make the reason for a following bug fix easier to see.
Update a comment block to include all the work that needs doing.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This makes its true value clearer, and will make a later bug fix patch
easier to understand.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
When building the tests/bluetooth/shell application without
the BT_CENTRAL feature, compilation fails:
subsys/bluetooth/shell/bt.c:1642: undefined reference to
`bt_conn_create_auto_le'
Signed-off-by: Vinayak Kariappa Chettimada <vinayak.kariappa@gmail.com>
Wrong option length in IPv4 header options testcase
added. This should cover malformed packet case.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If IPv4 header options has wrong options length
(e.g. options length is more that actual data),
then parser decrements opts_len without checking
actual data length. Which crashes the network stack.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Fix problem of not checking if the remote device key is actually our
own. This bug was intruduced in
46a95f12ad and causes failure of models
that use app_idx BT_MESH_KEY_DEV_REMOTE. Since this is used by cfg_cli,
it was not possible to do self-configuration.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
It is observed that after each test, weird characters appear on
console. This problem goes away if deep sleep is disabled.
The theory is that the CPU runs to deep sleep (_sys_suspend())
faster than UART can shift all the bits out. If we spin wait
for UART FIFO to clear, this is no longer an issue. This is
circumstantial evidence to the theory. So for now, put in
a workaround to spin wait for UART FIFO to clear before
going into deep sleep.
Relates to #22885
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The "fixed-clock" value referenced in the documentation is actually a
compatible value, not a property name. Fix that.
Harden the "expected to have a clock-frequency property" language to
use "must" instead of "expected". The scripts error out if a node with
fixed-clock compatible is missing a clock-frequency property; it's not
a soft expectation.
Be explicit about clock-frequency units.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add Kconfig option to support building the controller
optimized for speed.
Fixes#21601.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix local initiated Data Length Update procedure from being
stalled when a remote initiates a procedure with instant.
Fixes#23069.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds Device-Tree instances of the Flash controller
to the SAM3X, SAM4E and SAM4S series. The Flash-Controller
is used to get the unique device identifier.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
CLOE (Code Loop Optimization) does not exist on SAM3x.
Make the EEFC_FMR_CLOE disable depending on CONFIG_SOC_SERIES_SAM3X.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Include stm32XXxx_ll_utils.h in soc.h for every stm32 SoC,
if CONFIG_HWINFO_STM32 is selected.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Remove all "supported: -hwinfo" definitions from the boards
yaml files and documentation. hwinfo can generally be tested
on every board because it returns -ENOTSUP if not supported.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Make the NRF hwinfo driver depending on !TRUSTED_EXECUTION_NONSECURE
because the FICR registers are not accessible from the non-secure
world.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
The test checks for a correct implementation if HWINFO_HAS_DRIVER
is set, otherwise it checks for -ENOTSUP return value.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Introduce the HWINFO_HAS_DRIVER Kconfig symbol to get
the information if hwinfo is supported on the current platform.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Change the doxygen doc from "negative on error" to -ENOSUP and
negative value on driver specific errors.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
The service registration logic was using the wrong variable to check for
a pending service to be registered, which led to the same service being
registered twice in some cases. Fix the logic so that a pending service
is only registered once.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Under Sharing FP registers mode we would like to verify the
correct preservation of FPSCR during thread context switch.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Upon reset, the CONTROL.FPCA bit is, normally, cleared. However,
it might be left un-cleared by firmware running before Zephyr boot,
for example when Zephyr image is loaded by another image.
We must clear this bit to prevent errors in exception unstacking.
This caused stack offset when booting from a build-in EFM32GG bootloader
Fixes#22977
Signed-off-by: Luuk Bosma <l.bosma@interay.com>
Upon reset, the Co-Processor Access Control Register is, normally,
0x00000000. However, it might be left un-cleared by firmware running
before Zephyr boot.
This restores the register back to reset value, even if CONFIG_FLOAT
is not set.
Clearing before setting supports switching between Full access
and Privileged access only.
Refactor enable_floating_point to support initialize
floating point registers for every CPU that has a FPU.
Signed-off-by: Luuk Bosma <l.bosma@interay.com>
Add missing dependency in mesh.conf.
Handles this warning: Warning: BT_MESH_SHELL was assigned the value 'y'
but got the value 'n'. Check these unsatisfied dependencies:
BT_MESH_HEALTH_CLI (=n)
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove CONFIG_CONSOLE_HANDLER from project configuration. When building
for native_posix this produces the following warning:
warning: CONSOLE_HANDLER was assigned the value 'y' but gotthe value 'n'
Check these unsatisfied dependencies: SERIAL_SUPPORT_INTERRUPT (=n)
The shell works without this option since this is handled by the shell
itself instead.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix Tx pool from being corrupted when rough central device
uses invalid packet sequence numbers, causing NULL pointer
to be released into free data Tx pool.
Fixes#22968.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Xtensa uses two instructions to perform atomic compare-and-set
instruction: first the comparison register, then the actual
instruction to do compare-and-set. There is a potential that
context switching is performed before these two instructions.
A restored context may have the wrong value in the comparison
register. So we need to save and restore the comparison
register during context switching.
Fixes#21800
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
zephyr_smp_write_at is supposed to write len bytes of data at
the offset of a given net_buf, overwriting existing data and extending
beyond current buffer length, if needed. Unfortunately condition
checking if written data would fit within the buffer size has been
incorrectly implemented, making write impossible, when there has been
less bytes of space left within buffer tailroom than required to write
len bytes of data, even if len bytes written starting at given offset
would not cross the buffer boundary.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The sample contained calls that were not using the return
value, which was detected by Covery Scan as an issue. This
commit fixes it by changing to (void).
Fixes#18378
CID#203537
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
While testing statvfs operation, same mount path has been tested twice,
instead of two different mount points as intended.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
sys/timeutil.h could not be used without including first
<zephyr/types.h> because s64_t type definition was missing.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Added references to missing settings API groups so them
will be generated in documentation build.
Missing API are doxygen subgroup of already referenced doxygen group,
but subgroups aren't automatically extracted to the documentation
output.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
If the client is change-unware and disconnects the spec requires that
the stack still sends the error out of sync for the next request:
'The ATT_ERROR_RSP PDU is sent only once after the client becomes
change-unaware, unless the client _disconnects_ or the database changes
again before the client becomes change-aware in which case the
ATT_ERROR_RSP PDU shall be sent again'
Fixes#23110
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Resend transport segments for groups on the advertiser interface, even
if a connected proxy node holds the group.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
This patch activates the boost mode for the main regulator
when the system frequency above 80MHz for stm32l4Rx/stm32l4Sx
soc series.
To save power, the boost mode should be disabled below 80MHz.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This patch activates the boost mode for the main regulator
when the system frequency above 150MHz for stm32g4xx soc series.
To save power, the boost mode should be disabled below 150MHz.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This patches add a delay after setting the watchdog
to wait for the register (Prescaler and Counter registers)
to be updated before leaving (until LL_IWDG_IsReady is true)
Signed-off-by: Francois Ramu <francois.ramu@st.com>
