An application-supplied main() routine is now considered to be
essential to system operation. Thus, if main() experiences an
error that aborts the main thread a fatal system error is raised.
Note: If main() completes its work and does a standard return-
to-caller the main thread terminates normally.
Change-Id: Icc9499f13578299244a856a246ad2a7d34a72f54
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
A thread defined via a legacy MDEF that belongs to the FPU or
SSE task group must set the thread option bits for FP or SSE
register use prior to being spawned.
If this is not done, and the kernel is configured for SSE support,
the kernel will auto-enable the thread's use of floating point
so that the thread saves SSE register context info even if it
belongs to just the FPU task group, which could cause the thread
to overflow its stack.
Note that this change only increases footprint for x86-based
applications that enable floating point register sharing.
Change-Id: Idfe4d20bcd7bc42b4cee6ac40ad7987e2a45ccf6
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This routine is non-existent. (Fix for ZEP-1240)
Change-Id: I85a538037aac000207f5f01414fb53810691d349
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This reverts commit 0c9152d42d.
This was not ready for merge yet.
Change-Id: I08f69e27929867606bc58cdeffed6540725069a1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update with commit 577f12c07e4edd54730dc559a9c7bc44d22bf7dc from the Linux
kernel.
Change-Id: I6314dd41eb200c87cdcc6f212f13d3351128de0d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With this commit we provide header and HAL/LL files for all STM32F3
SoCs (V1.6.0).
Using STM32Cube provides generic access to all families, maximizes
code reuse across different STM32 families and helps taking benefit
of a mature SDK.
Origin: STM32Cube
URL: http://www.st.com/content/st_com/en/products/embedded-software/mcus-embedded-software/stm32-embedded-software/stm32cube-embedded-software/stm32cubef3.html
Purpose: Introduction of STM32F3xx STM32Cube definitions
and Abstraction Layers
Maintained-by: External
Original STM32Cube tree structure has been modified to a minimum
structure for a better fit into Zephyr. hal is split into 2 parts:
-driver: initially Drivers/STM32F3xx_HAL_Driver, contains HAL and LL
-soc: initially Drivers/CMSIS/Device/ST/STM32F3xx, contains stm32f3xx
socs header files
Change-Id: I542bec71130bcfc7b720c546b5671e4af4baf2e3
Signed-off-by: Adam Podogrocki <adam.podogrocki@rndity.com>
Change the included kernel header file from nanokernel.h
to kernel.h
Change-Id: I76cc952316430d618ea3ecb526d9bc2a99f04cef
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Reorganize the code tree so no forward declarations are needed
(basically, move main() to the bottom).
Retag as not build only so it can be run on Quark*
Convert to actually verify counter readouts are increasing /
decreasing over busy empty loops and the alarm is being called.
Change-Id: I746efe595b8d1ac4471dccc2e87f8b36f5cc8ebe
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The header uses struct device * plus stdint types.
Change-Id: Id4b817682afa4cc229f98a289adf6646d26d18bc
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Does a general cleanup including:
* adding descriptions for APIs that are missing them
* adding information that would be helpful to users
and removing information that wouldn't be helpful
* correcting errors
* aligning the terminology with the terminology used
in the Kernel Primer document
* standardizing the way information is presented
Change-Id: I536644a7dc60b62100e379a199a645344430beb7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Updates x86 floating point support to reflect changes that have
been made in recent months.
* Many, many, many cosmetic changes (mostly revisions to comments).
* Elimination of unnecessary function aliases that were needed
to support the task and fiber versions of certain APIs.
* Elimination of run-time code to enable a thread's "FP regs"
option bit if the "SSE regs" option bit was set. The kernel
now recognizes that the thread is using the FPU as long as
either option bit is set. (If the thread has both option bits
enabled this is the same as if only the "SSE regs" bit is set.)
Change-Id: Ic12abc54b6fa78921749b546d8debf23e7ad232d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Add a sample app to demonstrate the usage of Fujitsu SPI
FRAM.
It uses SPI 1 on quark spi controller and gpio 20 as CS.
Change-Id: I30c83bdd8312ca0cab7a62e397c0cb4ade0821cb
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Many APIs needed to be converted into inline functions first.
Now all APIs here are deprecated, or #defined to something that is
deprecated.
Change-Id: Ibad55adec113eb8913ebe07134a2e4935616bc1d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
PRIMARY, SECONDARY, NANOKERNEL, MICROKERNEL init levels are now
deprecated.
New init levels introduced: PRE_KERNEL_1, PRE_KERNEL_2, POST_KERNEL
to replace them.
Most existing code has instances of PRIMARY replaced with PRE_KERNEL_1,
SECONDARY with POST_KERNEL as SECONDARY has had a longstanding bug
where the documentation specified SECONDARY ran before the kernel started
up, but actually ran afterwards.
Change-Id: I771bc634e9caf7f17dbf214a270bc9967eed7d32
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
sanitycheck already sets this and we need to allow deprecation
warnings.
Change-Id: I3d6bf652403bcbdba47663c8cd0d17682a8a842d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add an Arduino 101-specific configuration that enables flash-based
storage support as well as the file system shell.
Change-Id: Ic10ea958dd2446df4942a8dfd3cce1e3368852b2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This consolidate code around LE signalling header handling which has been
duplicated in many places.
Change-Id: I0c2cd48c155b751e1bbbd26070965d075cdc2cc5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When a peer controller does not recognize one of the LL control
PDUs received, it will issue an LL_UNKNOWN_RSP PDU to let the
peer know that it does not recognize the request.
The controller now handles this incoming PDU and completes the
procedure by issuing the appropriate HCI event in the case of
an LL_FEATURE_REQ and _RSP pair.
Jira: ZEP-1220
Change-Id: I7c04a346441f04deee41198daa6309c11ae1b571
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This suppresses warnings for platforms where SERIAL can't be provided.
All the platforms that these drivers are interesting for already
default to SERIAL=y.
Change-Id: Id692f99e018009b30903db8a2c046a6086be01c2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
'private' is a C++ reserved word and will lead to compilation errors:
C++ ble.o
In file included from ble.cpp:7:0:
include/bluetooth/bluetooth.h:284:10: error: expected unqualified-id before 'private'
uint8_t private[4];
Change-Id: I36aef5a84af4fc66e1c810bd0c56e5ab5f803294
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The convention for Zephyr sample names is to use _ instead of - for
delimiting words.
Change-Id: I08a63e9f600deb38183f81ddb8f8bf407b6eec2e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In function at_get_number check for the value if gets computed.
If not return error. Also change the end state handling.
Change-Id: I193b04fa2880dfb44e7727b30b67c1ec2e051cc7
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Implement a new "clear" command to exercise the bt_storage API. The
command can either take an address parameter to clear storage for a
specific device, or, if called with the parameter "all", to clear the
entire storage.
Jira: ZEP-181
Change-Id: I1ebd17033f2062951abeeb7d7c448a34a3672577
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add an implementation for the bt_storage_clear() API.
Jira: ZEP-181
Change-Id: Iae01c571c161317ea0cc44513d108301c7b5a069
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add basic implementation of an internal storage handler that uses the
local file system. The root directory for all Bluetooth related data
is /bt. Each remote device has its own subdirectory and each key its
own file. This helps keep the implementation very simple, but does
come with the meta-data overhead for each file.
As an example, the value of a key 0x0001 for a device with a static
random address cc:11:22:33:44:55 would be stored in the following
file: /bt/cc11223344551/0001. Local values such as the identity
address are stored directly under /bt with a file name that matches
the key the same way as remote-device files.
For full functionality the implementation requires a file system that
can support file/directory names of up to 13 characters in length. If
the file system supports less than that (as is the case with FAT12)
then only local values can be stored (in /bt/abcd). Local values
include the identity address as well as the local IRK.
Jira: ZEP-181
Change-Id: I7dc696af6353a154cb00dcd01a5f4ac3d7127e6b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
