If no IP stack is seleceted, selecting one of the 2 cc2520 driver will
automatically select the relevant stack.
Change-Id: Icca22da190dc790ce6d302e14c45732f902e02ae
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- new stack options are renamed and placed in their respective menus
- new stack Kconfig gets normalized (tabs vs spaces, etc...)
Change-Id: Ia68f6589fed464bbdd76dc0812775684b2f94a58
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- tabs are use to indent, no spaces.
- NET_TCP should be defined as an option, though non-promptable for now
Change-Id: I9c5e55e1ab5c82c906fb5650f5d1539c65de1194
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As option list will grow, it will be saner to put them there instead of
growing the base Kconfig.
Change-Id: I72199d1d452986ed7a08d9bb3d1139f49622ec59
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As option list will grow, it will be saner to put them there instead of
growing the base Kconfig.
Change-Id: I610c47540e4fd6784b70198986813b737a38165c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Some old left over, was generating hard to spot errors on some other
places (mostly 'choice' related warnings).
Change-Id: I2ce2b27c8ab2703208a74dd852c0f0a7bcbeaa41
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will be necessary for devices that require to instanciate more than
one network interface.
Change-Id: I01fd4eb220ed63a4fe073614fb2a132cd00c6bc8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add socklen_t addrlen parameter to net_context_bind(),
net_context_sendto() and accept callback.
Currently the address length option is not really mandatory
as we can figure out the length from the address family.
But if we are going to support other protocol address families
it might be needed.
Change-Id: I59206465c3259050c469c5b2150221646a9a08d7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Because of printk fixes in master, some of the networking
unit tests will fail in next merge.
Change-Id: I3e28aae72c0c10b402b78c0f406ecb3513b967a7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Or the build will not go through.
Change-Id: I48f5f8661c4100a76e4624ea64d383055327e2a7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When only the dummy frame format is enabled, some variables are left
unused, causing some warnings.
Change-Id: Ic7bc5560a9fcb573e715c2cc29f308cec5214f64
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
When an IPv6 adress is specified, the port specified in the local
address is ignored.
Change-Id: I1df865c00b9b052e353a9d6fab4bf1152567efd5
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
When running echo-server in the Zephyr device (either a real
device or qemu), set the IPv4 address to be 192.0.2.2. The host
IPv4 address should be set to 192.0.2.1 in this case. This change
is similar to IPv6 address change made earlier (now both IPv4 and
IPv6 addresses on device side end with "2", on host side, with "1").
Change-Id: I639b7be4403b4b2f38f01675d0ef56eaabf0f82c
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The net_if.h is only meant for new IP stack.
Change-Id: I133d576d7c070dd4a2291544bd0b0401bda942b5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adding IP services support entries, documentation enhancements,
testing entries and IPv6 basic support entries.
Change-Id: If443ecaabf6bc8ca92f17eff67da9d9e8f7c797f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Earlier all unit tests are with IPv6 and UDP as next header.
Modified tests with IPv6 only, IPv6 + UDP and IPv6 + IPHC next
headers.
Change-Id: Ie02cecb37e07ceae8a06a0653e2ccdfe0db91239
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We missed that section, so sanitycheck was failing.
Also putting the right section in the relevant array.
Change-Id: I361ffa1707c01f0d3c870a7bc36a86ada66af1d2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Please collect things to do into this document.
Change-Id: I763cd0e3f6ec6b447b5d9efbebcb56f7b50cecc6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We are not just checking the test build but this time
the tests are also run.
Change-Id: I7b0b24c51dfc2dc58f290cca7a593be431b8077f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When running echo-server in the Zephyr device (either a real
device or qemu), set the IPv6 address to be 2001:db8::2.
The host IPv6 address should be set to 2001:db8::1 in this case.
Change-Id: Ia967cecabece4b06a2f5a12b11c68a9de4aeb2af
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The prj_slip.conf file should be used for qemu-to-host
communication only. It is not usable for testing between
two qemus.
Change-Id: Id06813a1b36f33f585e06df3f29479891ea3d2d8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the CONFIG_NET_TESTING option should be only enabled
if we have Qemu-to-Qemu communication, clearly tell this
in the Kconfig help for that option.
Change-Id: Id1c65d17fb9859ead767294b2f43dd7b57b007ac
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix the correct location of net-tools project files to
samples/net/README file so that the user can test the
echo-server and echo-client apps using SLIP and Qemu.
Change-Id: Ic34fa6e67da916c63e4f138e1e0def5d7632c80c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
640 bytes seems too short, raising to 800 bytes.
Change-Id: I8c3418787939369e24fe47c23b0558c36f05af2c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Debugging messages in 6lo are enabled as well.
Change-Id: I8fea044216e3c4e60d742ebc7256489832ae09ac
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Only meant to be used while debugging deeply. Thus needs to be enabled
by hand in the source code.
Change-Id: Idf4e33154fee0e3d7e1da64708e1c7b4d790d790
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Packet is compressed after its ll part has been computed when sending.
And it is then decompressed after the ll part has been validated when
receiving.
Change-Id: Ifebbd5727623e94f1c2273f2211ba0f109ac4a8f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Buf ll addr need to point to the right place, depending whether it's a
plain address field (thus with the pan ID) or not.
Change-Id: I9897b1f9bec0f7cecd01517c69c3bdefe2bc204b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When there is no compressed header following IPv6 one,
the type of such header is set after tc/flow information.
Using it relevantly to set IPv6 nexthdr field.
Change-Id: I78d5ae8b8377f9bed6b682fa070f2b5fe28dd3ee
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is a minor fix where it has to continue decompressing the
header instead of ending it after getting src address.
Change-Id: Ice46ec62b8de07927624b275c2a98158d37316fb
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Also removing a superfluous label.
Change-Id: Ie27e868fe3328162bb3f42312dd2cfcc230aa509
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The given buffer might have an ll part already filled in, so handling
its content if any.
Also reordering the local variable declaration according to Zephyr's
style.
Change-Id: Iaf9c117d39c90d5f71ca3aad02a52ea9d9b34223
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fixing as well minor Kconfig issues related to IEEE 802.15.4
fragmentation.
Change-Id: I4edd3db4501563a473b7cdf15da8262b8443c0ac
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
For consistency as well as for helping when grepping etc.
Change-Id: Ib5e6b3369e510dd2b996f735d801c2b80291ad7f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If compression header watermark is not found, it will successfully
return as it's not an error. It just means there is not uncompression
work to do.
Using NET_ASSERT() to check the argument validity as well.
Change-Id: I907f3f197d59d7ddb546860d232d6ca20a4445e3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_core.h is loading sys_log.h as well, so we need to be
first in order to setup some local definitions.
Change-Id: Ife482bd21e314aa5a5e88433eb8f9a560f9d53a6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to control the state of this routine, as this
will be ran only once.
Change-Id: I2f9f04012d793787ba56ef6403f8a92e8e1b073e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is only meant for the new IP stack.
Change-Id: I643b0556f87423f09555274749db93397ef66c59
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Reassembly IEEE 802.15.4 fragments as per it's datagram size
and datagram tag. Uncompress IP header fragment as soon as it
arrives. Size matches only after uncompression of IP header with
total length.
Support added for multiple IP packet reception. Default is one full
IP packet at a time. Cache size can be modified via Kconfig option
(NET_L2_IEEE802154_FRAGMENT_REASS_CACHE_SIZE).
Note: If you increase the size by 1 means, you should have N number
of data buffers available at max.
e.g. One full IP packet (1280 MTU) needs 15~16 data fragments means,
multiply size by same number of fragments. It requires more memory.
Offset based reassembly yet to be done (fragments can come in any order
[e.g. mesh]). Now assuming that fragments are in right order.
Change-Id: I17baee30a1087eb9ec6dc25f03ed64bbe0df2917
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
