rfcomm_make_uih_msg() only needs session to get the role while creating
msg. This is mainly done since some commands like Test and RPN may come
even before dlc is created.
Change-Id: Ifd5a2ceaf17c20db3f00604cd2b4f1759155123e
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
l2cap_br_conn_req_reply expects valid bt_l2cap_chan pointer but this
is achieved only on accept() callback. Use l2cap_br_send_conn_rsp
instead for rejecting cases where no channel was accepted. This also
makes success path being 'primary' function path ie erros all always
handled inside if() statements.
Jira: ZEP-1405
Change-Id: I890b4fcf029afce65eba4f2ebae0b1094feb007f
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
The buf.h header file is a more natural place for these than the
hci_driver.h file.
Change-Id: I1eedcf03ae6ffa374403b382ec665ae554d6847b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Not all users are in an ISR context where we can't block, so give the
callers the freedom to choose if they want to block or not.
Jira: ZEP-1481
Change-Id: I19bd7e2df94c4eeb60886a17a78f872bd7bea887
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds validation check when 'sdp discovery' API is to be called
by client, to reuse existing connection if valid or initiate new one
if posssible to set SDP L2CAP link to remote.
Change-Id: I47ce33cb5e95cf2616f9b23712641b912ce40f37
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Added a Pending Request structure, this will keep
a track of the last sent AVDTP Singnalling Message.
This will be used to verify the response from the remote device
Memory will be allocated by the application.
Change-Id: Ic31df154b52ce9013e5039ab195a9651d1811a7a
Signed-off-by: Arun Jagadish <arun.jagadish@intel.com>
Adds for now stubs of handlers responsible for taking a connected and
disconnected state of SDP L2CAP channel.
Change-Id: I21b76b755168fb63f6cade5f6b0c0bab93d0a01f
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds basic functionality to be able to trigger establishing outgoing
L2CAP channel to remote using as PSM SDP channel. The number of such
outgoing connections is limited by configured pool of connections.
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Change-Id: Ie5428e5b1b5f5c57f473ee0adfd4621cd9fe6e3e
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This patch contains API's which is used to parse range of values
eg. (0,3). This patch also parses the string, reads, process and
move the buffer accordingly.
Change-Id: I8dba5b7d630f65b87967c101557c5c7ffd297dd1
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
If more inquiry results were received during discovery than fits in
storage results with lowest RSSI will be skipped. This is to improve
API usefulness in busy environments where results with low RSSI (likely
more far away than high RSSI) could consume provided result space,
Change-Id: I1e9ca901b693f608d58575916809e8bd8bfe710f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to specify length of discovery from command line.
Change-Id: I3ad80e74b5cdc263e549ce309b75c1f5c117b653
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
at_get_number which converts the string into number now operates on
at_client to get the string buffer. This patch also improves API()
skip_whitespace to be operated on at_client. Also the the API's
get_cmd_value, get_response_string are updated to work with buf
increment.
Also in this patch the return type of the function str_has_prefix
is changed from 'int' to 'bool'.
Change-Id: Ia626e0d13212b84413cce0444349975f4abe1cf6
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
The execution time of k_sem_give() increased slightly recently, and
since it was being called from the radio ISR this had an impact in the
deadlines not being met.
This change moves the actual call to k_sem_give() to a lower-priority
job and thus out of the ISR to avoid its execution time affecting the
ISR's timing.
Change-id: I76c82df895c6daaffef52786b0c900ee15acb0aa
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The ECC emulation synthesizes its own HCI events so we may need up to
two available priority buffers at any point in time.
Change-Id: I88b37c7e9e9f64483d80cde9243470a7f0477321
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If an attribute has no special access permissions (e.g. it's
notify-only) it would set the permissions to 0. Having a dedicated
enum value for this makes the code a bit more readable.
Change-Id: I0d3d8716a2544379353148735ba29b1a137f7173
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Merge build system and application primer into one and put
all in one file to make it easier to follow.
Jira: ZEP-686
Change-Id: I64ec7ef7a6aa2ad80496ca0ee3ddc3d7fe09a5d7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When CONFIG_SYS_POWER_DEEP_SLEEP is enabled, spi_qmsi_ss will
keep entering deep sleep because it needs to wait until the
current transfer completes, which blocks the current thread.
The system keeps entering deep sleep again and again and the
transfer will never complete.
Add device_busy_set() to spi_qmsi_ss driver to indicate that
the device is busy and block the system from entering deep
sleep during transaction.
Jira: ZEP-1488
Change-Id: I5a4456933249def93eaa529b30b99d730af74482
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
When CONFIG_SYS_POWER_DEEP_SLEEP is enabled, i2c_qmsi_ss will
keep entering deep sleep because it needs to wait until the
current transfer completes, which blocks the current thread.
The system keeps entering deep sleep again and again and the
transfer will never complete.
Add device_busy_set() to i2c_qmsi_ss driver to indicate that
the device is busy and block the system from entering deep
sleep during transaction.
Jira: ZEP-1487
Change-Id: Ia681d242349bce5a9867e54df4e65dba09005930
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
The addresses used by the client were still made reference to the types
used by the old network stack.
Change-Id: Iaba919cb072e3295c9b371cc8fe493284c5b523b
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Enable arc to access the i2c controller on I/O fabric.
There are two i2c controllers on quark se SoC. One is attached
to the I/O fabric and the other one is in the sensor system.
X86 cpu is only able to access the i2c controller on the I/O
fabric and the access is supported by existing code. HW allows
arc to access both controllers. But, the existing code only
gives arc access to the controller in the sensor sub-system.
Let's grant arc the access to the controller on I/O fabric as
well by the following changes.
1. Add i2c_qmsi.c into arc compilation.
2. Use the already defined macros to choose interrupt numbers
and do interrupt unmasking automatically based on the
compilation targets.
3. Add new symbols in Kconfig including driver names for both
controllers
Jira: ZEP-1189
Change-Id: I317da6038c50e0c8bd16f446182c1f8bdf6d3ba2
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Enable arc to access the spi controller on I/O fabric.
There are two spi controllers on quark se SoC. One is attached
to the I/O fabric and the other one is in the sensor system.
X86 cpu is only able to access the spi controller on the I/O
fabric and the access is supported by existing code. HW allows
arc to access both controllers. But, the existing code only
gives arc access to the controller in the sensor sub-system.
Let's grant arc the access to the controller on I/O fabric as
well by the following changes.
1. Add spi_qmsi.c into arc compilation.
2. Use the already defined macros to choose interrupt numbers
and do interrupt unmasking automatically based on the
compilation targets.
3. Add new symbols in Kconfig including driver names for both
controllers
Jira: ZEP-1190
Change-Id: I40a5d423d4b7986a897834d1a3831938005eda6f
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Use new kernel header file and k_sleep from unified
kernel instead of nano timer.
Change-Id: I1c98c07f880382eaa87f6e0c45967a4b8b6bfd7d
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
HW allows both arc and x86 to access the pwm attached to the
quark soc I/O fabric. The existing code only allows x86 to
do this. Let's give arc the access.
Change-Id: Ie88649fea41bf86b84876c260f97dd4c12fd0b81
Signed-off-by: Baohong liu <baohong.liu@intel.com>
Make the buffer length for tx and rx are the same for
spi_transceive API call. QMSI only supports equal length.
This is clearly specifed in spi header file.
Also correct some coding style issues.
Change-Id: Ifd34683e8813dae9b692ad453176a93cb3848427
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Obsolete, replaced by _set_thread_return_value().
Change-Id: I23e9cfc07e43542f0965817edc3552d456fd2ef3
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Some tick frequencies lend themselves to optimized conversions from ms
to ticks and vice-versa.
- 1000Hz which does not need any conversion
- 500Hz, 250Hz, 125Hz where the division/multiplication are a straight
shift since they are power-of-two factors of 1000.
In addition, some more generally used values are made to use optimized
conversion equations rather than the generic one that uses 64-bit math,
and often results in calling compiler intrinsics.
These values are: 100Hz, 50Hz, 25Hz, 20Hz, 10Hz, 1Hz (the last one used
in some testing).
Avoiding the 64-bit math intrisics has the additional benefit, in
addition to increased performance, of using a significant lower amount
of stack space: 52 bytes on ARM Cortex-M and 80 bytes on x86.
Change-Id: I080eb338a2637d6b1c6838c119af1a9fa37fe869
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Like ceil() for real numbers, but for fractions.
Change-Id: I8387732a2b2fd8b5c2bed57a78726eab7cea2c5b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
From code inspection, the driver always took timeouts in milliseconds.
The only sub-ms wait uses k_busy_wait(), which has microseconds
granularity, but its granularity does not depend on the system clock
tick rate.
Change-Id: If48363fd1fbeeb8e5ff0f0f2ca86e671d63bc571
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
It receives a timeout in ms, but was still converting it to ticks, while
the unified kernel API takes a value in ms.
Change-Id: I8ff7f44090716385764fe4b2a087043a2e0d70af
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This limits the execution contexts that will go over the loop in
_unpend_first_thread() to only ISRs of very high priority that are
preempting the system clock timer ISR, and only during the time it is
handling timeouts.
Change-Id: Iaf0500d28a2de5e077c9cf9861a5a70244127d58
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The legacy IP stack was removed from the source tree, so this changes
were made to adapt to the native IP stack, but this might not work on
the galileo platform due the ethernet driver not being tested on the
new stack on TCP, but to have the reference application ready when
it gets integrated
Jira: ZEP-1448
Change-Id: Ifa6ea0afb3bc532dfb92b09debbf6eee59e38a25
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Adds optional support for tap and double tap sensor triggers to the
fxos8700 driver using the pulse detection hardware function.
Default configuration values were taken from NXP AN4072, section 6.3.
http://cache.nxp.com/assets/documents/data/en/application-notes/AN4072.pdf
Change-Id: Ia95091628a853eb956f6fd1df099a9e6e101b707
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Introduce tap and double tap triggers to the sensor interface.
Change-Id: Ic91d73e4393d643abc4119850d5b02164b1b6843
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
