GCC 6.x for ARC does not recognize the options
-mARCv2EM and -mav2em anymore.
Both options replaced in Makefile by -mcpu=quarkse_em.
Change-Id: I9dec26dd64b4738976704a39455fe4241406db9e
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
GCC 6.x for ARC does not recognize the options
-mARCv2EM and -mav2em anymore.
Both options replaced in Makefile by -mcpu=arcem.
Change-Id: Ic86bf51cd5fb1a67ba2cd75998cd907e26996347
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
SW0_GPIO_INT_CONF shall allow boards to define the
interrupt configuration for SW0 without having to modify
the button sample app.
If SW0_GPIO_INT_CONF is defined set EDGE to it, otherwise
used default EDGE value.
Change-Id: Ia697e06debc341463ed9cdee1db564f3727d27e3
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
The sensor_attr_set() wrapper deals with drivers that do not support
the attribute set API, there is no need to provide a per driver
implementation that only return -ENOTSUP.
Change-Id: I1568ab018988fc560bd89ab96f2f2256ddd5b7e1
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
UART 16750 is basically a UART 16550 with a 64-bytes FIFO.
The 64-bytes FIFO can be enabled via register FCR.
Account for it in the uart_ns16550 driver whenever the
CONFIG_UART_NS16750 variable is set.
Change-Id: I2342b28a41d03c96410bbfbe57e4b5a4e335731d
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
It's possible for the Public Key to be available by the time that the
bt_hci_cmd_send_sync() returns, so we need to make sure the flags have
the right values no matter what.
Change-Id: I053093b6611af360f52b14ddca50d409388f9475
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since RTTWriteNoLock is not thread-safe or preemptable, it is necessary
to lock interrupts around the calls to it.
Change-id: I38b7e37a0f46e77bf82c1e07d549414393e84a51
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In the documentation you can now reference issues in JIRA using the
following macro:
:jira:`ZEP-308`
This will link to the JIRA in the macro.
Change-Id: I3785d4abd243f5c5b75e9e3b58a449e2a3225415
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With LE Secure Connections the longest packet we require is 65 bytes
long: 64 bytes of Public Key data + 1 byte SMP opcode.
Extend the size of the L2CAP pool blocks so that they can fit such
packets and therefore one can use 70-byte
CONFIG_BLUETOOTH_CONTROLLER_TX_BUFFER_SIZE to achieve LE Secure
Connections pairing without HCI fragmentation.
Change-id: I2f11b4277ec5a24ceba79bccc7d84c64065b6e84
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
As per the spec, the station which disconnects the last dlc
should disconnect session also. In case if remote does not
do it we need to disconnect otherwise rfcomm will be connected
without any dlc. So this starts an idle timer to handle the
above scenario.
This also starts a disconnect timer to handle in case remote
does not respond to session disconnect request.
Change-Id: I3b45aa5bf4c35fd81dc10974f2b0b6d4cfe4ea7d
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Rename cind_status_handle_values to ag_inidcator_handle_values.
Because the same function will be reused internally for +CIEV
Callbacks.
Change-Id: I875064de17700d72ea89dbbe0f5cb6554c813a5e
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Reset AT and COMMAND state to process unsolicited response received
after processing result recieved for AT command sent to AG.
Change-Id: Id2a5827ce5b098336291696157027699479478cf
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Displays the present value of the indicators in the Handsfree
application.
Change-Id: I666ff2b15e70de8c1a26b902077d79c5c1a9d5fe
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Confirmation callbacks needed not be registered with AVDTP
during A2DP initialization
Change-Id: I2cdf8c5a283775e49fa6e7e9404024e26d05a767
Signed-off-by: Piyush Itankar <piyush.t.itankar@intel.com>
This basically implements timer for connection and disconnection.
Conn timer will be started when dlc is initialized and stopped
when it is connected. Authentication if any, will be also included
in this timer.
Disc timer will be started during disconnect initiation.
Change-Id: Ia4b74e478fefa42db21aef528e623a24c72ddf7f
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Moves rfcomm_send_disc() and rfcomm_session_disconnect() to call it
while doing timer implementation.
Change-Id: I5805d31fb45181193385f055716c8518d68cc4a1
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Adds more descriptive comment to the code responsible for handling no
resolved UUID case.
Jira: ZEP-1112
Change-Id: I1af07949e19246d51bab9df05504a90f5fb22bb2
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
User may want to know when getting called user UUID callback handler
on what UUID the result data was retrieved from server.
Jira: ZEP-1112
Change-Id: Iabb2dbdf0f3cfdb24244e052f094c7549164b199
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
In order that host can continue a connection event by
enqueuing packets, the number of completed packets event
needs to be generated as soon it arrives on air. Hence, the
Controller now calls the radio_event_callback on every radio
Rx complete ISR.
The callback executes at the Radio ISR priority, take care
to only do as little as necessary in the callback, say, just
a semaphore give to wake up the hci_driver's thread.
Change-id: If48afd0f1390d450bc1e7ec66f1c9fd45208d9a4
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
For the host to be able to block on the recv_thread while waiting for a
number of completed packets HCI event, those are pulled from the radio
in a new, higher priority thread that also schedules the execution of
the lower priority event/ACL data recv_thread.
Change-id: I9d356bd297d0504cb16a032fb5fe5530693546e2
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
net_buf shall not be used with k_fifo since net_buf_unref will assume
unused bytes in the beginning are actually fragments causing it to
unref them as well.
Jira: ZEP-1489
Change-Id: I5ce420de73b245dc20eb15ea4d8d0b6ba346e513
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since callers of bt_recv() have so far anyway been required to know in
which context to call it (based on e.g. bt_hci_evt_is_prio) it's
cleaner to have two separate APIs: bt_recv and bt_recv_prio.
Change-Id: Icd0d9aed9c51ffd2def31432c4ffcc16a9f13ccd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use interrupt based transmission instead of polling.
Change-Id: Iebfd67372044d3e6de9bdbdd6f0c9c6d01d46cb9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The recent redesign of the H:4 HCI driver means that the smallest
safest RX buffer count goes down to 2. Default is left at 3 however to
get a bit better performance.
Change-Id: I879c7bd3a769f973dfb9bd179d196ab91f9d2abe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
So far the use of k_sem meant that there was no major benefit of
having more than 2 or 3 RX buffers since there was no queuing
mechanism. Instead of using k_sem, introduce a k_fifo and use that to
queue up incoming buffers. This way the RX buffer count can be
increased with measurable effects on throughput.
Change-Id: I8122b233aeee7c8e145de3fff5f10bcfe348efaa
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Advertising reports are the only HCI events which we can drop if we
are low on buffers. Allocate them therefore with K_NO_WAIT rather than
K_FOREVER.
Change-Id: I0b7c92647f9be54b8746da837037725f8161a452
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since the controller already uses a thread for receiving data it makes
sense to enable the BLUETOOTH_RECV_IS_RX_THREAD option.
Change-Id: I927b20c1a0afaea8d000df28cc220a69ae817d59
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The controller uses K_FOREVER for the allocations so there's no
benefit in trying to use specialized pools (which exist to try to
guarantee availability of buffers for critical data).
Change-Id: I130f2c44a2f28af1284290e6a0b17dcba438862f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The H:5 HCI driver doesn't need the type-specific bt_buf allocation
helpers.
Change-Id: Iccb9803f32f3143f1cdf972d9229124816a99aa6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Allocate the event buffers after the ECDH operations rather than
before them. This way we don't hold on to the buffer for potentially
multiple seconds while the buffer could be used for other things.
Change-Id: I0fcc34ec4bea2265b7df3c1de3587c2a850c974e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no need to use the type-specific helpers since those anyway
map to the same pool.
Change-Id: I74750f545c989bb921abca58166fe591ed325856
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Completely redesign the H:4 driver to utilize its own thread and
select the new RECV_IS_RX_THREAD Kconfig option.
Jira: ZEP-1483
Change-Id: I0ca0661b66d564e5edc1b8505706d6bb76632e79
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Give more sensible values when RECV_IS_RX_THREAD is configured.
Change-Id: I40b5bd88213d224cc29f63fccef6cecee5868f77
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The separate ACL & event pools will soon be removed, and it's already
now convenient to have a generic API when the exact type of the
incoming packet is not yet known.
Change-Id: I84cb65d17ea69ebeaeb21532fbf76689e4fb59a0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
