In order to test the coaps_server sample app on
Arduino 101 board.
Change-Id: I7b393dac03a8020b7bd515c3b5b2fd961940bc21
Signed-off-by: Wu Jiequan <jiequanx.wu@intel.com>
Layer code should be made so that masking them don't overlap with
another one in net_event code logic. Earlier it was possible to get
an IP addr event for IPv6 even though code would be only listening
for IPv4 one.
Reported-by: Xiaorui Hu <xiaorui.hu@linaro.org>
Change-Id: I8341a91d55556033dd228f68f8ca64e196f52bec
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This makes net_ipv6_nbr_add able to update entries so it can be reused
when receiving RA or NS requests, so it now performs a lookup before
creating a new entry (using nbr_new to reuse more code) and in case it
finds a match attempts to update the lladdr.
Change-Id: I305a67a955e037cbbb862fef947a5fcfe131507c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
net_ipv6_nbr_add shall init the delayed work as nbr_new does, so this
unifies both codes into nbr_init which does take care of initializing
the fields properly.
Change-Id: I91746276d346a3dc3c36be20d49bcf1968245fc5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This creates a test case that enables all the currently known
network related Kconfig options. This is useful so that we can
compile test various Kconfig options. Note that the result binary
is not meant to be run anywhere and it will probably not run as
some of the enabled options do not make sense in real life.
Change-Id: Iede36131b43d95acb78b4094004626e1b86e0f95
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Route lifetime was printed using wrong modifier.
Change-Id: Ib503d50b5817491984d51bbdaadf7457fdde178b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure the RPL is compiled ok if CONFIG_NET_RPL_MRHOF is
enabled in the configuration.
Change-Id: I51fc0e20f854164c7e0374fa6a1ebf1d4e4dbc5b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If multicast routing is set meaning that MOP3 (Mode of Operation)
is enabled, then the code was not compiling properly.
Change-Id: Ice8a9f7b705c781536d3c2c5ca6cc2bb77a7acc1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that CONFIG_DNS_RESOLVER_MAX_SERVERS and
CONFIG_DNS_NUM_CONCUR_QUERIES are defined even if
CONFIG_DNS_RESOLVER is not enabled. This fixes compilation
error in this special case.
Change-Id: Icf1f247c138c379246ece57e78b04e70ae43cc1e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print information about configured DNS servers when starting
in order to ease the debugging.
Change-Id: I3ba71e514e463db790b82913e4c66a67160366dc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to set the resolved IP address family and length
before calling the user callback so that callback does not
need to figure out these values itself.
Change-Id: I724909fc1707608ab8728231a0311795b6a313f3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added bt test code in the http_server sample app and in order
to test on Arduino 101 board, added prj_arduino_101.conf file.
Change-Id: Ie68a81ee809e8618f70b5fab6fdbd66692401014
Signed-off-by: Wu Jiequan <jiequanx.wu@intel.com>
Check net_recv_data() return value, if it returns an error release
the net_buf. Based on a fix in eth_mcux driver.
Change-Id: I44ca5fd8dfb7175620b7e8850a68443100039db6
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Since commit-id 1ab40390c9 arp_input()
unrefs the buffer on success (NET_OK) so no need to do it afterward.
Change-Id: I84ab7e8eb07f50d52b329e4c025d88753a5de4db
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The default hop limit is defined in struct net_if. It is possible
that user might want to tweak it for each network packet. For this
purpose, a net_nbuf_set_ipv6_hop_limit(buf) function is created.
Change-Id: I7568330358f80f0f5007d6d3c411c120b043c04f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The Kconfig.rpl file was missing option to actually collect
RPL statistics. Unified the config option name to be
CONFIG_NET_STATISTICS_RPL as there was two conflicting settings
in the code and both of them were missing from Kconfig file.
Change-Id: I4ce4fcbaa317b36cac315ea3b3f710fa7a344b25
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The probing_timer is only available if CONFIG_NET_RPL_PROBING
is defined.
Change-Id: I2835d17e6c3d616f815f8beefd87d2571a5ad94c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
After failing to send the buf we need to release it.
This is not done for Bluetooth or IEEE 802.15.4 links which
create a copy of the sent buf and the failure case is already
checked by net_tcp_send_buf().
Change-Id: Ia556376b58ad74f68accb64eb2221a78d59dc2ec
Signed-off-by: june li <junelizh@foxmail.com>
In case CONFIG_NET_BUF_POOL_USAGE is defined use print pool->name
instead of the pointer.
Change-Id: I0be5fd8283a887145e61bdad02f721265453ce20
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use UNALIGNED_GET in net_addr_ntop as the uint16_t pointer used in this
function can point to an unalined address.
Jira: ZEP-2012
Change-Id: Idfbfa8da4c8d4e10299c4ae4d6431b10466cc988
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Add two testcases for mqtt_publisher and mqtt_subscriber.
The combination of the two, covering most of the MQTT APIs.
Change-Id: Ib663ee1f550362ca493501046ddf8508a25ac956
Signed-off-by: Wu Jiequan <jiequanx.wu@intel.com>
Ensure that the CRC16 functions compute a few test values properly.
Change-Id: Ie98049aefac8a330b9b81d3bf333deb09bc35c39
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Add the simplest possible CRC 16 function that computes the CRC value
without the help of lookup tables.
Change-Id: I9163389adaa4a70c4e8ce8ce6d5f0661f40c7871
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
If the IPv6 fragmentation support is enabled, then print current
status of the IPv6 packet reassembly in "net conn" command.
Change-Id: I384e35928b67dd39ac720c77683b1767e2a1ce88
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Figure out what is the last extension header in IPv6 packet
and return offset to it. This is needed by IPv6 fragmentation
when fragmentation header is added to the packet.
Change-Id: I925ab806a5de076a425ff354711730d4f4b3c52f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds support for IPv6 packet fragmentation when
receiving (IPv6 reassembly) and when sending larger than 1280 bytes
long IPv6 packet. See RFC 2460 chapter 4.5 for more details.
Jira: ZEP-1718
Change-Id: Ia31c147cce4d456ee48f39276cca99aa09ce81d6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add net_nbuf_split() function that can be used to split
an existing net_buf fragment into two arbitrary length pieces,
and return the two new fragments to the caller. The data from
the original fragment is copied into these two new fragments.
Existing fragment is not modified.
Change-Id: I463e675232c6e19c2a42929f480893a6d1265873
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check net_recv_data() return value and if it returns an error
then release the net_buf in order to avoid leaking it.
Coverity-CID: 158884
Change-Id: I10d411a2de4b7c7bbe2475df65d93f5b1e619679
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Incorrectly use variable even if it is null.
Coverity-CID: 157593
Change-Id: I883421a16870e5fe3c1d81e461f55f912ea168c0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not try to cancel query if the DNS query index is < 0.
Coverity-CID: 166770
Change-Id: I03c1f274453640d0ff80694628b8e8f18e8de900
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use UNALIGNED_PUT() to store the MSS value into network packet
because the memory location cannot be guaranteed to be properly
aligned.
Change-Id: I77fd7a70ef45eedb657cac29457b0239b0a1d4c2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
TC_START was missing from some tests. For this reason automated testing
parsing wasn't unified for all tests. This patch fixes the issue and adds
TC_START to tests where it was missing.
Change-Id: I7e27a3fd8eaef9c3d0b0e0aeba9bca5b97eb0c58
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
This test takes a bit longe than specified and fails on a daily basis
due to the low timeout specified.
Change-Id: Id774c35cb1b0d0dcc5455e4121a8e9e1612baafd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit 1c06065941.
Breaks cc3200_launchxl really bad:
CC drivers/serial/uart_cc32xx.o
/projects/zephyr4/drivers/serial/uart_cc32xx.c:39:18: error: ‘TI_CC32XX_UART_4000C000_BASE_ADDRESS’ undeclared here (not in a function)
.base = (void *)TI_CC32XX_UART_4000C000_BASE_ADDRESS,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/projects/zephyr4/drivers/serial/uart_cc32xx.c: In function ‘uart_cc32xx_init’:
/projects/zephyr4/drivers/serial/uart_cc32xx.c:65:5: error: ‘TI_CC32XX_UART_4000C000_BAUD_RATE’ undeclared (first use in this function)
TI_CC32XX_UART_4000C000_BAUD_RATE,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Change-Id: If46c239bc8d6b4296494f638e900f6044a92ce26
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch fixes an issue with mixed case node names. Node names
containing upper case letters were causing key match errors during
post processing. This patch maintains the case of the node names.
Change-Id: I153a186fa09dcf958c9de55b578dbc63e615a076
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Tinycrypt 0.2.6 fixed the issue with the definition of 'bool'.
Issue: ZEP-1722
Change-Id: Ie470e25dfe02a58d9c3f2324cab85bc02f574b51
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
_power_save_idle_exit() was removed long ago. All arches now just
call _sys_power_save_idle_exit() if PM is enabled.
Change-Id: I9cce3eecc8cbf1cbce15a355be420e747fb978de
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A patch moved the specification of debug flags to a
KBUILD_CFLAGS_OPTIMIZE, but this Makefile wasn't updated.
Change-Id: Ic0d23f95609798473298cda4c044981edabb3ed5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
it covers the story "Port AES-CMAC-PRF-128 [RFC 4615]
encryption library for Thread support"
ZEP-734
Change-Id: I6213309b51da435060c3e3cfadde67e21a927b2b
Signed-off-by: ethan gao <ethan.gao@intel.com>
Deleted the instance of app_kernel in tests/legacy/benchmark.
JIRA: ZEP-1980
Change-Id: I5a6e073d9b0c870be0cc7d8ae5bb352b11d7f97e
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
When running with qemu often times the developer want to enable all
sorts of debugs which end up not working with only 192K.
Change-Id: I8d784618b9a0d911944f831a4058b34abc0c3e35
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The filter expects CONFIG_, otherwise it is noop
Change-Id: I2b0a02b6450287a090b69a12324fe7f7cf494999
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Filter was wrong and sample was not being built on any boards. Exclude
platforms that do not support interrupt based UART drivers.
Jira: ZEP-2014
Change-Id: I84a690e7c93fae52335434830b83086019cfd00d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
