Convert older DT_INST_ macro use in esp32 drivers to the new
include/devicetree.h DT_INST macro APIs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rename DT_INST_{0,1,2}_ESPRESSIF_ESP32_UART_IRQ_0 defines to something
non-DT prefixed. This way we know which defines are one's we generate
and which ones are driver created. It should be easy enough to replace
these INST_{0,1,2}_ESPRESSIF_ESP32_UART_IRQ_0 define with DTS generated
one macros once esp32 has interrupt controller support in DTS.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix so that different isochronous synchronization modes can be used.
It filters out the synchronization mode before sending the endpoint
type to drivers.
Signed-off-by: Johan Carlsson <johan.carlsson@teenage.engineering>
LOG_LEVEL_SET was ignoring level argument and was setting default
log level always.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Update the ticks_current value on last stopped ticker
instance, so that when a new ticker instance is started
the anchor ticks calculation uses the correct current tick
with respect to supplied anchor ticks.
Fixes#23805.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
AN521 is a dual core FPGA on MPS2+ with both cores are CM33. Add openAMP
to support on it.
Core 0 is primary core, it runs as master, core 1 is remote, it runs
as slave.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Add configuable shared memory address for openAMP samples. There is a
plan to add more platforms supported for openAMP in zephyr.
Each platform can specify the shared memory address and device by
device tree and add it's support in openAMP samples.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert older DT_INST_ macro use in silab drivers to the new
include/devicetree.h DT_INST macro APIs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Out-of-tree code can still be using the old file locations. Introduce
header shims to include the headers from the new correct location and
print a warning message.
These shims should be removed after two releases.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit renames the `cortex_r` directory under the AArch32 to
`cortex_a_r`, in preparation for the AArch32 Cortex-A support.
The rationale for this renaming is that the Cortex-A and Cortex-R share
the same base design and the difference between them, other than the
MPU vs. MMU, is minimal.
Since most of the architecture port code and configurations will be
shared between the Cortex-A and Cortex-R architectures, it is
advantageous to have them together in the same directory.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit re-organises AArch32 configurations for consistency.
1. Move Cortex-M-specific includes to `cortex_m/Kconfig`.
2. Relocate the "TrustZone" configurations to `cortex_m/tz/Kconfig`
since these are really the TrustZone-M configurations and do not
apply to the TrustZone-A.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Convert older DT_INST_ macro use in cc13xx_cc26xx drivers to the new
include/devicetree.h DT_INST macro APIs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert older DT_INST_ macro use in stellaris drivers to the new
include/devicetree.h DT_INST macro APIs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The documentation was not updated following a change to the way
DT_PROP_LEN works which was made in review. Fix it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We get the following error:
ValueError: max() arg is an empty sequence
if the compatiable section of the device tree is empty or doesn't exist.
Fix this by havingin max_len get a default value of 0.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds multi-processing support for Intel Apollo Lake ADSP.
Some of the start-up code is borrowed from ESP32.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the per CPU address offset for intel_apl_adsp, so
the correct base address can be calculated under SMP.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The GCC 9.2 toolchain for intel_apl_adsp has builtin atomic
functions already so we can use that instead of the custom
one in arch. This allows the atomic function calls to be
inlined.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a rather primitive driver for use with the Intra-DSP
Communication (IDC) on the DSP on certain Intel SoCs. The IDC
generates interrupts from one core to another by writing to
certain registers. This is also being utilized as
the scheduler IPI since it can interrupt other cores.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the DTS binding for the CAVS Intra-DSP Communication (IDC)
driver for the DSP on Intel SoC.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a sys init level which allows device and sys_init
to be done after SMP initialization, z_smp_init(), when all
cores are up and running.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Under multi-processing, only the first CPU#0 needs to go through
setting up the kernel structs and clearing out BSS (among others).
There is no need for other CPUs to do those tasks. Since each
Xtensa core starts using the same boot vector, CPUs other than #0
need to skip all the startup tasks by not calling to z_cstart().
So provide another entry point for those CPUs. Note that Xtensa
arch is highly configurable. So the implementation of the entry
point is up to each individual SoC config.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
