Set the received network packet priority according to VLAN priority.
Currently this mapping is 1:1 but can be changed if needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently the VLAN priority is the same as packet priority but
if such conversion is needed, then this function can be used
for such conversion.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This enables / fixes VLAN support in mcux ethernet driver.
The commit contains these changes for enabling VLAN:
* Increase the size of the ethernet frame if VLAN is enabled.
* Enable VLAN in chip if VLAN is enabled
* If VLAN is enabled, then the iface in context struct should
not be used directly as there can be multiple VLAN iface
related to this physical device.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This application just enables VLAN tag for ethernet interface.
Set CONFIG_SAMPLE_VLAN_TAG option to define the desired VLAN tag.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add commands to add, remove or get information about VLANs
attached to network interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add tests to verify the bit manipulation functions in net/vlan.h
file. Also check that we can check if given network interface has
VLAN enabled or not. Verify also that received network packet
contains correct VLAN tag.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows creation of virtual lan (VLAN) networks. VLAN support is
only available for ethernet network technology.
Fixes#3234
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removing ${} variable evaluation fixes the issue.
For sam4s_xplained:
Before:
/repos/zephyr/samples/hello_world/build$ make VERBOSE=1 | grep march
/repos/zephyr/samples/hello_world/build$
After:
/repos/zephyr/samples/hello_world/build$ make VERBOSE=1 | grep march
...
-mthumb -mcpu=cortex-m4 -march=armv7e-m
...
Signed-off-by: Paolo Teti <paolo.teti@gmail.com>
Some of the sanitycheck tests were having too small limit for
network buffers when compiling for sam_e70_xplained board.
Increase the buffer limits when testing this for this board.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As we have E70 ethernet driver enabled, we need to enable the
generic ethernet L2 driver too so that the ethernet is actually
useful.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently sleep and usleep functions are into unistd.h file.
unistd includes toold chain secific unistd.h file and this file
too has declaration for these functions. This is in conflict when
posix specific unistd.h is included.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Clarify the difference between the buffer length and threshold Kconfig
options available in the nRF5 entropy driver.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Improve the documentation of entropy_nrf5.c by adding a comment that
clarifies it's characteristics.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Update Kconfiglib to upstream revision 981d24aff7654 (+ local Zephyr
modifications) to get commit 981d24aff7654 ("Set is_menuconfig True on
the top menu") in. It will be needed by the menuconfig implementation.
Origin: https://github.com/zephyrproject-rtos/Kconfiglib/tree/zephyr
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Logical or is unsufficent for setting up new tmod: it's required to
remove previous one first. Indeed, 0 as tmod is valid (tx-rx mode), but
previous tmod could be 10 or 01, so a logical or will keep the previous
tmod leading to a bogus transaction.
Fixing also a rebase issue visible when debug mode is enabled. Slave
callback is a left over from a test on spi slave.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There's a small but real chance of a race-condition when sending
messages to the local node (through the local network interface) that
expected parameters will be NULL in the message handles. Add
appropriate NULL checks for them.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Commit 29f8b23b broke "make menuconfig" due to a missing newline in
this Kconfig.quark_se file.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Refer to the samples/net/eth_native_posix sample app
and mention that this driver only works on Linux
with admin rights
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Update Kconfiglib to upstream revision 2259d353426f1 (+ local Zephyr
modifications) to get commit 2259d353426f1 ("Generalize is_menuconfig to
non-symbol items") in. It will be used by the menuconfig implementation.
Origin: https://github.com/zephyrproject-rtos/Kconfiglib/tree/zephyr
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
The sensor channel type for the nRF TEMP peripheral is incorrectly set
to SENSOR_CHAN_AMBIENT_TEMP. This peripheral measures die temperature,
not ambient temperature.
Fix the sensor channel.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
It involves a minor change on which register is configured.
Most of the change is with threshold handling.
Handling the Kconfig based supported mode per-port.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This adds to the spi_loopback test board-specific configurations
for the following boards:
- nrf51_pca10028
- nrf52_pca10040
- nrf52840_pca10056
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This adds a translation layer to make the nrfx driver for the legacy
(i.e. without EasyDMA) nRF SPI peripheral accessible via the updated
Zephyr's API of the SPI driver.
Configuration files are already prepared for adding support for SPIM
(Master with EasyDMA) and SPIS (Slave with EasyDMA) peripherals.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Now that MCR20A supports the new API, legacy support from mcux dspi
driver can be safely removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And adding support for GPIO CS as well.
It looks like the driver could benefit from centralizing all SPI access
into a unique function, the protocol does not seem too convoluted to do
so, like CC2520 or CC1200.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adds support for the new spi api to the mcux dspi shim driver. Does not
remove support for the legacy spi api since there are still consumers of
that api, particularly the mcr20a 802.15.4 driver.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
