extract_controller only handle the first phandle in a cell property.
However we could easily have something like this where the phandles
vary:
gpios = <&gpiod 13 GPIO_INT_ACTIVE_LOW
&gpioc 14 GPIO_INT_ACTIVE_LOW>;
So we need to walk the property list for each phandle and produce a
define associated with it.
Also, if alias to the node is defined, indexed alias define
is generated for every indexed controller define:
#define GPIO_LEDS_0_GPIO_CONTROLLER_0 "GPIOA"
#define GPIO_LEDS_0_GPIO_CONTROLLER_1 "GPIOB"
#define LED1_GPIO_CONTROLLER_0 GPIO_LEDS_0_GPIO_CONTROLLER_0
#define LED1_GPIO_CONTROLLER_1 GPIO_LEDS_0_GPIO_CONTROLLER_1
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we had something like:
gpios = <&gpiod 13 GPIO_INT_ACTIVE_LOW
&gpiod 14 GPIO_INT_ACTIVE_LOW>;
The script blows up in extract_cells. While extract_cells attempted to
handle more than a single item in such a list, it didn't manipulate the
prop list for the recursive calls properly.
Since we pop off items from the prop list as we use them we can easily
pass the prop list to the rescurive call to fix things.
Besides, if alias is defined for the node, indexed aliases defines are
generated:
#define GPIO_LEDS_0_GPIO_FLAGS_0 4
#define GPIO_LEDS_0_GPIO_FLAGS_1 0
#define GPIO_LEDS_0_GPIO_PIN_0 5
#define GPIO_LEDS_0_GPIO_PIN_1 6
#define LED1_GPIO_FLAGS_0 GPIO_LEDS_0_GPIO_FLAGS_0
#define LED1_GPIO_FLAGS_1 GPIO_LEDS_0_GPIO_FLAGS_1
#define LED1_GPIO_PIN_0 GPIO_LEDS_0_GPIO_PIN_0
#define LED1_GPIO_PIN_1 GPIO_LEDS_0_GPIO_PIN_1
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Indexed defines were systematically generated even when there
was only one element to generate.
So we ended up generated a lot of _0 defines.
Then we needed to generate aliases to these _0 indexed defines,
in order to get useful defines.
For instance:
#define GPIO_LEDS_0_GPIO_FLAGS_0 4
#define GPIO_LEDS_0_GPIO_PIN_0 5
#define GPIO_LEDS_0_GPIO_FLAGS GPIO_LEDS_0_GPIO_FLAGS_0
#define GPIO_LEDS_0_GPIO_PIN GPIO_LEDS_0_GPIO_PIN_0
This commit allows to generate _0 indexed define only if a
property has more than one elements to define.
Aliases generation to _0 indexed defines are also removed.
Note: IRQ are left untouched since this is frequent to handle
multiple IRQs in a driver
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Some functions were using y_key and y_val as argument. This was not
quite easy to read. Rename argument into more informative versions.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add usb disconnect pin support.
Some boards use a GPIO pin to controll a transistor,
which drives the pull-up resistor on USB DP pin.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Add few tests to check access permissions of memory partitions
of a memory domain, validate memory domain destroy.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
The mailing list hosting software change introduced some changes to
where mailing lists are hosted. Update the docs to point at the
specific sublists rather than the top-level site. (See issue #7437).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This commit implements consistency checks for the core registers
in ARMv6-M, ARMv7-M, and ARMv8-M architectures, ensuring that
the user cannot accidentally select registers that are not
implemented by the selected Cortex-M processor.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The commit improves the help text of the ARMV7_M_ARMV8_M_MAINLINE
K-config option.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Newlib uses any RAM between _end and the bounds of physical
RAM for the _sbrk() heap. Set up a user-writable region
so that this works properly on x86.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The hts221 requires 2.2 ms at boot time to download
the flash content into the volatile mem and the
calibration values cannot be read before that.
This issue is causing following crash:
***** USAGE FAULT *****
Executing thread ID (thread): 0x20000234
Faulting instruction address: 0x80037de
Division by zero
Fatal fault in essential thread! Spinning...
Signed-off-by: Armando Visconti <armando.visconti@st.com>
With the introduction of --list-tests to sanitycheck, a few rules have
been added to how to declare test suites.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The disco_l475_iot1 board uses the vl53l0x sensor in XSHUT pin
master control configuration mode. So, it has to explicitly
enable it now.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The XSHUT pin, used to shutdown the device when it is not
in current use, is optional and some boards (like ArgonKey)
leave it tied to vdd. So, the driver must provide a way to
make this part configurable.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
NET_APP settings was missing the device name and enabling the net shell
is nice to verify runtime configuration as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commit adds a Context Synchronization Point immediately
after the reset handler switches to use the Process Stack
Pointer, during initialization.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The current doxygen configuration settings create 4096 folders to hold
the generated HTML output (with names such as d3/ddb/). This makes it
difficult to know what an URL would be for a particular module's
(defgroup's) documentation. By not creating these subdirectories,
module documentation file names become quite predictable:
group__<group name>.html
(e.g., group__sensor__interface.html) allowing us to create
links from the Sphinx-generated documentation into the doxygen-generated
HTML content (this part is under investigation).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Most calls to ztest_assert() contain a message with no trailing
newline. So when it fails, we get (eg:):
starting test - test_multilib
Assertion failed at multilib.c:19: test_multilib: (c not equal to 323)
smoke-test failed: wrong multilib selectedFAIL - test_multilib.
when we'd like to get:
smoke-test failed: wrong multilib selected
FAIL - test_multilib.
among other things, because it is easier to parse for correctness.
So this patch adds a trailing newline to the message instead of going
around trying to police every call site to do it.
print[kf]() is used vs k_str_out() as we need something that is
available also for unit tests. As this is not in any hot path,
performance wise is not such a big deal.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This commit adds the following changes from upstream:
- ed38e895ace ("Increase indent for implicit submenus to 4")
Suggested by Carles Cufí. Makes it easier to see the menu structure
at a glance.
- 1d252b30c77 ("menuconfig: Convert the C locale to a UTF-8 locale for
LC_CTYPE")
Makes Unicode input work on many systems with bad defaults.
Also fixes some interface ugliness, like down arrows turning into
upside-down T's.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Instead of manually iterating all app keys and net keys, use the
bt_mesh_subnet_del() helper on all subnets. This will also clear any
app keys, and ensures that persistent storage is cleared as well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Both the local sequence number as well as the Replay Protection List
(RPL) are states that may potentially change very often. In order not
to wear out the flash with these updates it makes sense to try to
avoid too frequent writes.
For the local sequence number a simple solution is not to write the
number on every increment. This patch introduces a new Kconfig option
to define after how many increments the sequence number gets written.
When the stack gets initialized it automatically adds the configured
number to the last stored one, thereby guaranteeing that the node
starts off with a number that's larger than the last used one.
The RPL is more problematic, since in principle it needs to be updated
every single time that we receive and process a message. Especially
security sentitive nodes will want this stored immediately to flash.
To give some use-case dependent flexibility, this patch introduces a
new Kconfig option to specify a timeout after which the RPL gets
written to flash.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These are needed both for bt_mesh_provision() as well as persistent
storage-based network creation.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This variable is both redundant as well as problematic when it comes
to adding persistent-storage-based provisioning information, which
will not come through main.c or the bt_mesh_provision() API. Just
remove it and use bt_mesh.valid which serves the same purpose in
practice.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add APIs for storing core network values, such as Net and App Keys, IV
Index, Sequence number, RPL, etc.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial skeleton for doing settings-based persistent storage for
the mesh network state. This patch only includes restoring some core
network state such as IV Index, Sequence number, Net Keys, App Keys
and the Replay Protection list. The remaining state, and actually
storing the state, is left for follow-up patches.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The sequence number is incremented from several different places in
the stack. The way it was done was potentially race condition prone,
and was also problematic from the perspective of updating the
sequence number in persistent storage. Create a dedicated helper for
incrementing the sequence number (solves the race) which can in later
patches be used to add the persistent storage support.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This for loop runs inside an "if (!sub)" branch, so explicitly setting
sub to NULL in the loop is redundant.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These app key and net key (subnet) helpers will soon be needed to be
called from the persistent storage code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Header was missing after merging PR #6970
`Add support for File System multiple instances`
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Group tests under 'Zephyr Tests' and only document the actual tests.
Create cross references to APIs being tested where applicable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds a board-level config option to select whether the code gets linked
into internal instruction tightly coupled memory (ITCM), external
hyperflash, or external qspi flash. The default is ITCM.
Note that we are not yet building an image vector table (IVT) into the
image, therefore the zephyr binary is not bootable by the SoC ROM as-is.
However, the DAPLink firmware prepends an IVT to the image when you use
its drag-and-drop feature to program flash, and this results in a
bootable zephyr application.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds flexspi and semc memory controllers to the i.MX RT SoC. Adds
hyperflash, qspi, and sdram external memories to the mimxrt1050_evk
board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds 8 MB and 64 MB flash size options, which correspond to the two
external flashes (qspi flash and hyperflash) on the mimxrt1050_evk
board. Adds a 32 MB SRAM size option, which corresponds to the external
sdram on the board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Previously, when !CONFI_XIP, BOOTLOADER_SRAM_SIZE was defaulted
to 16 (K), reducing the size of SRAM available for the program.
Also, though it has no effect, the value for SRAM start in the
dtsi file was incorrect.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The API in the current SDK version is rom-patched, and uses
prcm.c code in the driverlib directory.
But, the PRCMMCU3200Init() API call should be prefixed by MAP_
to allow the option to use the ROM API in a future TI SDK version.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Add comments explaining why these three driverlib files need to be
built rather than using the ROM versions.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
