- Tailor the warning when the symbol has no prompt, explaining how
promptless symbols get values. Add some anti-select propaganda too.
- Reference the 'Setting configuration values' in the Board Porting
Guide. It explains Kconfig.defconfig files.
Fixes: #8388
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
With the update to Sphinx, we no longer need to provide our own updated
version of jquery.js (update is now part of the Sphinx release).
See #5591 and #5618
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update the doc build tools versions listed in requirements.txt (and
mentioned in the doc building instructions).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
When using CONFIG_MULTITHREADING=n, the semaphore primitives are
non-functional and useless. Remove their usage when this option is
enabled.
Signed-off-by: Johannes Hutter <johannes@proglove.de>
Zephyr currently allows users to choose a compiler optimization
between -O0, -Og and -Os, the default being the latter as it offers a
good compromise between speed and flash usage. In cases the speed
matters and/or the flash usage doesn't, optimizing for speed with -O2
is another alternative. For example in case of a simple application
doing cryptographic signature validation with mbedtls, the flash size
increase by about 15% compared to -Os, while it provides a 15% speed
boost for a RSA signature and 30% speed boost for a ECC signature.
This patches therefore adds a new option CONFIG_SPEED_OPTIMIZATIONS
corresponding to the -O2 flag, but keep the default set to
CONFIG_SIZE_OPTIMIZATIONS.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
It is currently not possible to define multiple compiler options using
the CONFIG_COMPILER_OPT Kconfig option. The string is interpreted as a
single quoted option, for example "-opt1 -opt2".
This patch fixes that by splitting the CONFIG_COMPILER_OPT string into
multiple options using the separate_arguments cmake function.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a helper module scripts/ci/list_undef_kconfig_refs.py that searches
the entire Kconfig tree and reports any references to undefined Kconfig
symbols. Use it to add a new check to scripts/ci/check-compliance.py.
Also allow list_undef_kconfig_refs.py to be run standalone.
Example error:
Error: Found references to undefined Kconfig symbols:
BAR
===
- Referenced at Kconfig:12:
config FOO
bool
depends on BAR
- Referenced at Kconfig:16:
menu "menu"
depends on BAR
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This symbol will be added by
https://github.com/zephyrproject-rtos/zephyr/pull/7915.
Having it in there doesn't hurt that much by itself (undefined symbols
default to 'n'), but I'm about to turn references to undefined Kconfig
symbols turn into an error.
Remove the reference.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In the BLE controller, radio HAL, for the PPI registers:
To enable for easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Cleaned up old test hooks.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the BLE controller, radio HAL (TIMER registers):
To enable for easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Cleaned up old test hooks.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the BLE controller radio HAL, for the CCM registers:
To enable for easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Cleaned up old test hooks.
(CCM part)
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the Radio HAL, for the RADIO and RTC registers:
To enable for easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Cleaned up old test hooks.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the BLE controller radio HAL:
To avoid confusion, use SOC series macro instead of board macro.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the BLE controller ECB HAL:
To avoid confusion, use SOC series macro instead of board macro.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the BLE HAL for the ECB:
To enable for easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Cleaned up old test hooks.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the ble hal for the RTC:
To enable for easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Cleaned up old test hooks.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
To enable for easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
To enable for easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
To enable for easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
When the priority of the LwM2M engine was lowered, it causes an
occasional registration update to fall outside of the registration
lifetime. This shows up as the following error:
Failed with code 4.4. Retrying registration
Let's try and retry a bit earlier to account for the priority
change.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Check the return value of close() in socket_dumb_http.c
If non-zero, print the error code
Fixes#8413.
Signed-off-by: Satya Bhattacharya <satyacube@gmail.com>
The prepended 0x causes DTC warnings and shouldn't be there.
Tested by compiling hello_world for nrf52840_pca10056 before and after.
Fixes#8334.
Signed-off-by: Alex Tereschenko <alext.mkrs@gmail.com>
When using CONFIG_MULTITHREADING=n, the semaphore primitives are
non-functional and useless. Remove their usage when this option is
enabled.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
A HID application can no longer write to the default
interrupt IN endpoint because the addresses are assigned
dynamically. Add hid_int_ep_write() function and leave
it to the hid-core to call the usb_write() with the correct
endpoint address.
fixes: #8424
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This enables testing of the scan, connect, and disconnect
wifi_mgmt functions of the wifi shell module for
the cc3220sf_launchxl.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Initiate a SimpleLink WiFi Driver, implemented to the WiFi management
offload APIs for scan, connect, disconnect.
Also registers the DHCP-obtained IPv4 address upon connect.
This was validated on a cc3220sf_launchxl using the wifi
shell module from the Zephyr shell_module sample.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This commit contributes the definition and the implementation
of an API for ARM MCUs to configure and get the configuration
of the security state targeted by a given external IRQ line.
The API is only available in Secure ARM Firmware.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This fixes invalid assert condition.
As stated in Bluetooth Core v5.0 Vol 3 Part F
3.4.4.1 Read By Type Request &&
3.4.4.9 Read by Group Type Request
"The starting handle shall be less than or equal to the
ending handle."
3.4.3.1 Find Information Request &&
3.4.3.3 Find By Type Value Request
"Only attributes with attribute handles between and
including the Starting Handle parameter and the Ending
Handle parameter that match the requested attribute type
and the attribute value that have sufficient permissions
to allow reading will be returned."
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Updates nrfx to the recently released version.
This version introduces a new HAL for the RADIO peripheral (contained
in the "nrf_radio.h" file) and this HAL replaces the one temporarily
copied to the "nrfx/hal" folder in the Zephyr source tree (see commit
619790a9bcb3a6fea7a91af24007eba6404c1a2b). The nRF 802.15.4 radio
driver ("nrf_drv_radio802154.c") is updated accordingly to reflect
the changes between these two RADIO HAL implementations.
Origin: nrfx
License: BSD 3-Clause
URL: https://github.com/NordicSemiconductor/nrfx/tree/v1.1.0
commit: 293f553ed9551c1fdfd05eac48e75bbdeb4e7290
Purpose: Provide peripheral drivers for Nordic SoCs
Maintained-by: External
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
UART_PIPE_ON_DEV_NAME is set to UART_1 by default in
boards/arm/qemu_cortex_m3/qemu_cortex_m3.dts
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Declare and implement convenience wrappers to evaluate Non-Secure
read and write permissions of C variables using the cmse address
range intrinsics.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit contributes the implementation of the CMSE
address range permission checks based on the ARMv8-M
address range check intrinsics exlusicely for Secure state.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Refactor arm_cmse_mpu_region_get(.) function, so its signature,
documentation, and implementation align with the rest of functions
for obtaining MPU, SAU and IDAU region numbers via the TT instruction.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit defines and implements an internal ARMv8-M API
that allows the user to evaluate access permissions of memory
locations, based on the ARMv8-M Tests Target (TT, TTA)
instruction support (for Secure requests).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit introduces additional dependencies and selection
scheme for CPU_CORTEX_M_HAS_SPLIM, for Zephyr Non-Secure builds
on ARMv8-M MCUs with Security Extensions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit introduces the ARMV8_M_SE K-config option
to signify the use of an ARMv8-M MCU with support for
Security Extensions. It also introduces dependences of
ARM_(NON)SECURE_FIRMWARE on ARMV8_M_SE.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit introduces the K-config option
ARM_NONSECURE_FIRMWARE, to indicate a Zephyr firmware image
that is intended to execute in Non-Secure state.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit improves the help text description for K-config
option: ARM_SECURE_FIRMWARE.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adapt functions for new composite interface.
Assign bInterfaceNumber and similar variables of a Interface
default values, these should be valid values for non-composite
configuration. For the case of the composite configuration,
these variables must be set by the interface configuration
function (interface_config) accordingly.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch reworks composite device support. It allows the
functions to be modular and the user to combine its own
functions with the USB functions of the Zephyr OS.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Introduce function to configure interface descriptor at runtime.
It is simple to leave the corresponding function to configure the
interface descriptor and fix bInterfaceNumber and iInterface values,
for example.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Add the routine to validate endpoint address and update the endpoint
descriptors and usb_ep_cfg_data at runtime.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
