When we're reading the initial state from flash, calling the various
internal functions was leading to scheduling a rewrite to flash. Add
an extra parameter to the appropriate functions so they know when
they're called due to active configuration by a configuration client,
and when they're called due to restoring the state from flash.
This was not only wasting flash space, but also causing erroneous
behavior with the FCB settings backend if there was an intermediate
node reset operation stored, followed by a reprovisioning. The node
reset entries would cause them to be re-appened after the second valid
provisioning, leading to an incomplete node state.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the model publication is not enabled, we should return success,
however no other steps need to be done. This also helps avoid writing
redundant entries to flash when resetting a node that never had model
publication enabled.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There were several things broken with the initialization order during
node reset:
- The model->flags should not be touched since the writing to
persistent storage happends through delayed work, and the flags
need to be kept until that.
- The unprovision() function should only be called at the very end of
the reset procedure, since it calls model-specific init functions
which may clear things which the earlier reset routines depend on.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bcdUSB has been previously updated from 1.1 to 2.0 in default
device descriptor, but not in DFU class. After USB bus reset
performed by dfu-util, alternative descriptor is registered
with bcdUSB set to 1.1. This mismatch causes communication failure.
DFU descriptor's bcdUSB has been updated to match default one.
Relates to #7570
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
Provide flexibility in choosing to use the host defined crypto
functions or the ones provided by the controller
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This adds an Kconfig option to disable GATT Multiple Read support.
This GATT sub-procedure is optional and does not have to be supported.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This function does nothing actually if SMP is disabled.
This excludes att_signed_write_cmd handler from build if BT_SMP
is disabled or BT_SIGNING is disabled.
Note:
BT_SIGNING depends on BT_SMP
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This chunks should be excluded from build if the target application
does not support neither observer not central role.
This helps to reduce the application image size that implement
Peripheral or Broadcaster role.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds dependency upon BT_BROADCASTER and BT_OBSERVER roles.
Those are necessary to implement Mesh device.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Don't build the code that is related to central role if the target
does not support connection creation.
This helps to reduce the application image size that implement
either Observer, Peripheral or Broadcaster role.
Note:
BT_CENTRAL implies BT_CONN and BT_OBSERVER
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The test verifies that the mock framework can handle functions
under test which call more than one mock function, and
correctly processes each call.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Calling __builtin_ffsl(neg_bitmap) returns first bit set in the word,
e.g. 4 if bitmap is 11111000. As this must translate to zero-based index
3, one must be subtracted from the result.
Signed-off-by: Morten Priess <mtpr@oticon.com>
VERBOSE if set to any value enables verbose build output,
setting to 0 does not have the intended effect.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It is quite easy to implement a buggy or security vulnerable
advertising data parser. Provide a helper for this purpose, which uses
the existing bt_data struct which is used for programming the local
advertising data.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
STM32F412/413/446/469 SoCs have 6 bidirectional endpoints
according to the reference manuals RM0402, RM0430,
RM0390 and RM0386.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Also simplify the definition of CC3220SF_DEBUG. 'default's can be other
symbols too, not just literal values. The condition for the symbol to be
visible (user-configurable) can be put directly on the prompt as well.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Also fix the 'default' on XIP. Due to Zephyr's prefer-later-defaults
behavior, it was always set to 'y' (when the dependencies were
satisfied).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
It is not necessary to link 'app' with mbedTLS because mbedTLS is
covered by the 'APP_LINK_WITH_MBEDTLS' mechanism that automatically
links 'app' with mbedTLS.
This patch removes the redundant target_link_libraries invocations.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
It's common for people to put in a 'default n' "just in case", because
it might not be obvious that bool symbols implicitly default to 'n'. To
make it clearer, mention the implicit default value on the reference
pages of symbols without defaults.
Also mention that choices without defaults default to the first
(visible) symbol in the choice.
Note: Adding to the confusion, Kconfig used to generate a
'# CONFIG_FOO is not set' line for 'default n', but no output when there
was no default. I changed that recently in both the C tools and
Kconfiglib. There's no output either case now (unless the symbol is
visible).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Defines a PTP clock driver that can be implemented in those network
interface drivers that provide gPTP support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Julien Chevrier <julien.chevrier@intel.com>
This commit selects HAS_DTS_I2C in bbc_microbit board definition.
It fixes issues similar to issue #8511 for bbc_microbit board
Signed-off-by: Mandar Chandrakant Thorat <mandar.chandrakant.thorat@intel.com>
This is actually the same as #7229 in which we missed this side of
conversion (only PCP to packet priority was implemented).
The conversion is actually the same both ways, thus it uses the map
added earlier.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
intList has been populated with the number of isrs, aka interrupts,
but nothing has not been using this information so we drop it and
everything used to construct it.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Make corrections in state binding of Servers as per Mesh Model
Specifications. Previously, when OnPowerUp state equal to 0x02,
then Light Lightness actual state was not assign to last power
down value. Plus when Generic OnOff state changes by client,
then Light Lightness Actual state value get assigned as Light
Lightness Last value instead of default one.
All these issues has fixed here.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
The SSE and SSE_FP_MATH configs exist only in the x86 architecture, so
extract them to a separate prj_x86.conf file for the fp_sharing test.
Fixes Kconfig warnings when building the test for frdm_k64f:
- warning: attempt to assign the value "y" to the undefined symbol SSE
- warning: attempt to assign the value "y" to the undefined symbol
SSE_FP_MATH
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The commit modifies the I2C-related defines in nrfx
configuration to comply with the updates in (57e3644).
It also modifies the i2c configuration in DTS for board
nrf52810_pca10040 to reflect the nRF52810 capabilities.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit moves the definitions for the LED and Buttons
supported in nrf52810_pca10040 DK in DTS from board.h. Aliases
are kept in board.h to make basic examples pass.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds a compile-time directive for the
nrf52810_pca10040 board that instruct nRFx to perform
certain board initialization. The directive is needed
as nrf52810_pca10040 mirrors the nrf52832 DK hardware.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The nRF52810 is a low-cost variant of the nRF52832, with a reduced set
of peripherals and memory. This commit adds basic support for it in the
arch SoC and dts folders.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <ioannis.glaropoulos@nordicsemi.no>
When adding the nRF52810, which has 24KB of RAM, some of the tests don't
compile anymore due to lack of SRAM. Address this by either filtering
the test out or reducing the amount of memory allocation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since Nordic does not offer an nRF52810 Development Kit and instead
recommends using the nRF52 DK (nRF52832 based), add a board that
enforces the limitations of the nRF52810 but is designed to be flashed
onto the actual nRF52 DK hardware.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <ioannisg.glaropoulos@nordicsemi.no>
nrfx requires specific chip configuration for each IC. Those are not
upstream in the nrfx repository, but rather part of the Zephyr nrfx
port. Add a configuration for the nRF52810.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <ioannis.glaropoulos@nordicsemi.no>
In order to avoid auto-selection by Kconfig, the board needs to define
the specific IC that it contains, in this case an nRF52832.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This allows for scripts using nrfjrog to specify the serial number of
the attached device to use instead of showing a list of available
devices by adding an optional parameter.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdtech.com>
