Due to bug #9054 this boards is being disable from sanitycheck
temporarily.
Revert when the board is fixed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add new kwyboard to board definition to allow blacklisting boards. This
is needed when a board is broken causing CI to fail without a fix in
sight.
Add:
sanitycheck: false
to the board yaml file to disable the board. By default, the value is
set to true.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use modular arithmetic in statistics prints so that wraparounds are
automatically handled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If -fno-strict-overflow compiler flag is disabled, then this warning
is printed:
samples/net/throughput_server/src/server.c:157:6: \
error: assuming signed overflow does not occur when assuming \
that (X + c) >= X is always true [-Werror=strict-overflow]
if (new_print > curr) {
Fixes#8924
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Intel SDM Vol3 10.5.4.1 states that "A write to LVT Timer Register that
changes the timer mode disarms the local APIC timer".
This implies that LVT Timer register needs to be programmed before
Initial Count register, otherwise the LOAPIC timer could not be armed.
Signed-off-by: Zide Chen <zide.chen@intel.com>
If IOREGSEL register is not accessed with 32 bits, it may not be
intercepted by type 1 hypervisor correctly.
Signed-off-by: Zide Chen <zide.chen@intel.com>
Test that user is able to turn on/off promiscuous mode and
also receive any data from network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to set the network interface into promiscuous mode
and then receive all the network packets that are received by
that interface.
Fixes#7595
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that user is able to toggle promiscuous mode flag
in network interface level and that flag value is passed
to device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test in ethernet mgmt level that promiscuous flag is passed
properly to the device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User is able to set the network interface to promiscuous mode
and query the promisc mode status.
Note that currently this is only supported for ethernet bearer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor the prj*conf files so that there is only one master
prj.conf and several overlay conf files that add / change
only minor subset of functionality.
Use the overlay files like so:
cmake -DBOARD=nrf52840_pca10056 \
-DOVERLAY_CONFIG=overlay-ot.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The controller already has a minimum of 1, and the host should mirror
that (in particular to avoid Kconfig warnings). A single buffer is
unsafe in some scenarios (such as with LE SC enabled) however there
are valid scenarios where a single buffer makes sense, so leave it up
to the developer to choose this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This allows network stack headers to be included even if
no L3 networking support is enabled in Kconfig.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit adds the implementation that allows the ARM CPU
to recover from (otherwise fatal) MPU faults. A new error
reason, _NANO_ERR_RECOVERABLE, is introduced. The error
reason is used to suppress fault dump information, if the
error is actually recoverable.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit does several things:
- It unifies the way the fault inspection is implemented,
irrespective of the selected fault dumping level.
- It removes the dumping of the Thread ID and faulting
instruction address, as these are now displayed by
_NanoFatalErrorHandler.
- It introduces a new debug print directive, to be used
for the highest dumping level (2).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit implements two changes.
- It splits out the dumping of the Secure stack information to a
separate function. Dumping will only occur if the highest dump
level has been selected.
- Forces _Fault() to invoke _NanoFatalErrorHandler, instead of
_SysFatalErrorHandler. In addition, early return statemets are
implemented in _Fault(), so the fatal error handler is only
invoked once.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit improves the documentation of function _Fault(.),
in order to better describe the actual implementation and the
use of the function arguments.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
CONFIG_DNS_RESOLVER is the master switch for DNS resolution support,
for both native and socket APIs. Avoid confusing link errors by
compiling out both dns_resolve_name() and getaddrinfo() if that
option is not enabled.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If echo-server receives a IPv6 packet with large header (e.g HBHO)
build_reply_pkt() function failed to remove IPv6 header. Reason is
net_buf_pull() doesn't work if header length is more than one
fragment. net_pkt_pull() solves the issue.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current implementation does not handle large extension headers
(e.g HBHO). Which resulted network stack crashes or due to
misinterpretation of lengths network packets are dropped. Also
caused issues while preparing IPv6 packet (e.g. large HBHO header
with IPv6 fragmentation support).
Issues fixed and provided more unit tests.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
name command can be used to read or write the GAP Device Name which is
used by the advertise command.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This force CONFIG_BT_DEVICE_NAME_MAX to be set even in boards where
CONFIG_BT_SETTINGS won't be defined so it exercise such configuration.
In addition to that set a long name that would not fix in the
ScanData.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables the user to provide a ScanData, as long as it contain
names, and set BT_LE_ADV_OPT_USE_NAME.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces a new advertising flag BT_LE_ADV_OPT_USE_NAME which can
be used by applications to make the stack automatically include the
Bluetooth Device Name in the Scan Response.
The name is also updated in case there is already an advertising
instance using it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes GAP name writable if CONFIG_BT_DEVICE_NAME_STORAGE is > 0
which means the name can be persisted.
Fixes#8357
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This uses bt_dev to store the name and allow changing it at runtime, in
addtion to that if CONFIG_BT_SETTINGS is defined make the name
persistent.
Fixes#8357
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
sanitycheck not printing QEMU console in some cases where a crash
happens and when state is not set correctly.
Fixes#9061
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
No need to run the tests in real hardware as there we can run
out of network buffers that happened with Atmel SAM-E70.
Fixes#8966
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Generate proper error if we run out of network buffers which means
so that the test can fail properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This code path for returning from an exception wasn't
updating ERET with ESF->pc, resulting in any updates to
the PC by the fault handler being ignored.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This extends the NS16550 driver to support 4 ports.
Also, this adds the necessary bits to enable PCI enumeration
on port 2.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
LOG_MODULE_REGISTER() was missing setting compiled-in log level
which was evaluated when message was filtered if runtime filtering
was disabled. As the outcome logs were not printed when runtime
filtering was disabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit enables accurate (based on 64-bit math) tick <-> ms
conversion if system clock rate is determined at runtime.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Set device state to DEVICE_PM_ACTIVE_STATE before making it busy.
Also improves the kernel/device.c coverage.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add test for z_early_boot_rand32_get() API.
This also improves the coverage for kernel/init.c
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
