Add testcase for validating poll events by manipultaing thread
state to improve code coverage. Also, add multiple threads to
wait on same event.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
Add support for the STM32 Real-Time-Clock leveraging the LL APIs
Signed-off-by: Johannes Hutter <johannes@proglove.de>
Signed-off-by: Kiril Zyapkov <k.zyapkov@allterco.com>
PTS version 7.3.0 incorporates some errata which change the expected
behavior of the heartbeat subscription state. Update the code so that
the following tests pass successfully:
MESH/NODE/CFG/HBS/BV-01
MESH/NODE/CFG/HBS/BV-02
MESH/NODE/CFG/HBS/BV-03
MESH/NODE/CFG/HBS/BV-04
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some things, such as UUID, URI or even the local name may be different
when bt_mesh_prov_enable() is called compared to when bt_mesh_init()
was called. Create the advertising data on-demand each time when
enabling PB-GATT.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In some cases the application might only initialize its UUID after
calling bt_mesh_init(), e.g. in the case of deriving the UUID from the
identity address. To avoid confusing logs, only print the UUID when
actually enabling one of the provisioing bearers.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With the recent changes to identity address handling the local
identity address is only guaranteed to be available once
settings_load() has been called. Move the initialization of dev_uuid
to the appropriate place.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a sample application to show the LP5562 driver. The three RGB
channels are used to set multiple colors after each other under the
assumption that accordingly colored LEDs are connected. Blinking is also
shown in multiple colors.
Signed-off-by: Johannes Hutter <johannes@proglove.de>
Add support for TI LP5562 I2C 4-channel LED driver.
Supported blinking period: 1ms - 1000ms
Supported brightness value: 0% - 100%
This driver supports the entire currently available API.
Signed-off-by: Johannes Hutter <johannes@proglove.de>
Fix the osSignalWait timeout calculation in cases when
waiting on more than one signal event.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
FE310 is the name of one SoC out of a range of products in the SiFive
Freedom line. The FE310 SoC port in Zephyr is compatible with all of
these products, so rename the SoC to SiFive Freedom
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
When a DTS node has no 'compatible' property and its parent node has a
list for its compatible property, return only the first element of the
parent's compatible list.
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
Add tests for kernel managament APIs and enhance memory
pool tests with bulk allocation, free and negative cases.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Add support for usbotg_fs, by adding the DT fixup, pinmux macros,
and the DT entries in stm32f2.dtsi.
Signed-off-by: Istvan Bisz <istvan.bisz@t-online.hu>
Instead of having just one static "UART console" device, allow to
instantiate buffered, interrupt-driven POSIX-like "tty" wrapper for
any underlying device. Then, use this functionality to provide
compatible "console API".
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
In order to be able to place the generated HTML content directly in a
folder of the user's choice, make the Sphinx HTML output folder
configurable.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
PTS test cases MESH/NODE/TNPT/BV-07-C, MESH/NODE/TNPT/BV-12-C, requires
to receive 8 segment of data which summary requires 108 bytes of SDU.
This patch make test cases PASSing.
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@codecoup.pl>
Thise uses the new net_pkt_append_memset() function to generate the
required zero filling instead of calling net_pkt_append_u8() in loops.
Fixes#9287
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
Some locations like DHCPv4 client create a prefilled packet by appending
new fragments in a loop with one byte each via net_pkt_append_u8() which
is wasteful and noisy. This patch adds the new functions
net_pkt_append_memset() which creates fragments as needed in the desired
size and initialises it to the specified value.
This change also adds a unittest for the new function.
Prerequisite for #9287
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
Echo server crashes upon reception of fragmented packets. This
occurs when fragmentation is enabled with the default prj.conf
of echo server. The cause is that by default with logs disabled
net_sprint_ipv6_addr returns NULL.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Commit ac92a01f5a changed the net_ipv6_hdr
definition. The ieee802154 fragment test wasn't updated to match this
change.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There exist two symbols that became equivalent when PR #9383 was
merged; _SYSCALL_LIMIT and K_SYSCALL_LIMIT. This patch deprecates the
redundant _SYSCALL_LIMIT symbol.
_SYSCALL_LIMIT was initally introduced because before PR #9383 was
merged K_SYSCALL_LIMIT was an enum, which couldn't be included into
assembly files. PR #9383 converted it into a define, which can be
included into assembly files, making _SYSCALL_LIMIT redundant.
Likewise for _SYSCALL_BAD.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Commit 8525944c54
tests: power: refactor power_states test
Re-introduced CONFIG_ARC_INIT=n that isn't required and causes build
errors for sanitycheck.
Fixes#9444
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rather than having some implied name for the logging name, explicitly
pass it in the macros LOG_MODULE_REGISTER & LOG_MODULE_DECLARE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit is a fix for Issue #8226
- Error flags are assigned to the correct mailbox now.
- set_filter_mutex is moved from can_stm32_attach to the wrappers
can_stm32_attach_isr and can_stm32_attach_msgq. This protects
response_type variable.
- Waiting for empty mailbox semaphore return value
is checked for none zero values to check all error states.
- The mailbox tx_int_sem is reset before the sending is triggered.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
The error is detected if USART1 TX configured to PA9 and RX to PA10.
The serial cable removal stops the USB communication.
In case of VBUS sensing deactivation, erroneously
both USB_OTG_GCCFG_VBUSBSEN and
USB_OTG_GCCFG_NOVBUSSENS are set in GCCFG.
Correct handling is:
- VBUS sensing deactivation: set USB_OTG_GCCFG_NOVBUSSENS in GCCFG.
- VBUS sensing activation: set USB_OTG_GCCFG_VBUSBSEN in GCCFG.
ST Bug Tracker ID: 34714
Signed-off-by: Istvan Bisz <istvan.bisz@t-online.hu>
The eth_stm32_hal has been tested to work correctly on Nucleo-F207ZG,
Nucleo-F429ZI, Nucleo-F746ZG and Nucleo-F767ZI.
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
This patch adds support for Ethernet in the STM32F2 family of
microcontrollers and enables it for the the Nucleo-F207ZG.
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
Move the MEPC increment logic in __irq_wrapper such that the saved MEPC
is only incremented on a syscall (ecall instruction).
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit removes the depreciated "default n" entries from
boolean K-config options in arch/arm.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
These work like def_bool, setting the type and adding a default at the
same time. This extension fixes some Kconfig inconsistency.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A design flaw of 'gsource' is that there's no way to require at least
one file to match the glob pattern. This could lead to silent errors.
Switch to a new design, where a plain 'source' is globbing and requires
at least one file to match. A separate 'osource' (optional source)
statement is available for cases where it's okay for a pattern (or plain
filename) to not match any files.
'orsource' combines 'osource' and 'rsource' (relative source).
This commit search-replaces 'gsource' with 'source', but backwards
compatibility with 'gsource' is still maintained by making it an alias
for 'osource' (and by making 'grsource' an alias for 'orsource').
The three Kconfig files arch/{nios2,posix,xtensa}/Kconfig source
arch/{nios2,posix,xtensa}/soc/*/Kconfig, which doesn't match any files.
Use 'osource' for those. The soc/*/Kconfig files seem to be for
additional SoC-specific symbols, only none exist yet on those ARCHes.
Also use 'osource' for the source of $ENV_VAR_BOARD_DIR/Kconfig in
boards/Kconfig, which doesn't exist for all boards.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Document that the boilerplate code included in all applications must
now also include
cmake_minimum_required(VERSION 3.8.2)
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
