Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
MISRA-C requires that every switch clause has a break instruction.
Changing gen_kobject_list script to generates compliance code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
There is no reason why this sample should have a higher version required
of CMake in order to build.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
'find_program' should be used instead of 'set' for determining the
paths of host programs. It resolves#9582 and various other issues.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
In the BLE controller, NRF radio HAL, for the PPI registers used
for the SW TIFS.
To allow easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
As per PTS, IUT is expected to return success for the
Range Get messages (Light Lightness Range Get for
MMDL/SR/LLNS/BI-01-C, Light CTL Temperature Range Get
for MMDL/SR/LCTLS/BI-01-C). This commit take care of
this issue.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Now if transition (instantaneous or non-instantaneous) is due
to delta level, then state binding would be as per it.
This is as per 3.3.2.2.3 of Bluetooth Mesh Model
Specification.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Corrected spelling mistakes for content of enum defined in
transition.h & renamed some functions. Corrected comments
in main.c
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
With this it is possible to get proper target value & remaining
time in status response from Servers when transition in progress.
If transition is not in progress then those things would not
get integrate into status response. This is as per Bluetooth
Mesh Model specification.
It is inspired concept from Bluetooth Mesh Developer study
Guide.
Also updated Transition Time (TT) related parameter calculation.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Added Generic Default Transition Time Server & Client
Models names in list of Models supported by this App.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
All flash controllers have a mandatory compatible property.
Add it to the generic binding that is included by all.
Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com>
UART pins (TX, RX, RTS, CTS) are now configured in DTS files.
RTS and CTS definitions are optional. If flow control is enabled
and RTS/CTS pins are not defined, then compiler will issue
an error message.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
According to https://help.github.com/articles/about-codeowners/:
The `docs/*` pattern will match files like
`docs/getting-started.md` but not further nested files like
`docs/build-app/troubleshooting.md`.
docs/* docs@example.com
In this example, @octocat owns any file in an apps directory
anywhere in your repository.
apps/ @octocat
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
PyYAML 3.13 includes a fix necessary to install on Python 3.7:
3.13 (2018-07-05)
Rebuild wheels using latest Cython for Python 3.7 support.
Support it by accepting any PyYAML at least as recent as the current
version in requirements.txt, currently 3.12.
Signed-off-by: Marti Bolivar <marti@foundries.io>
When config hw cycles=32768 max_wait_cycles maybe small than 60us.
The fix change the condition,make sure the wait time exceeds 80us.
Fixed#9816
Signed-off-by: Frank Li <lgl88911@163.com>
With the new Kconfig preprocessor (described in
https://github.com/torvalds/linux/blob/master/Documentation/kbuild/
kconfig-macro-language.txt), the syntax for expanding environment
variables is $(FOO) rather than $FOO.
$(FOO) is a general preprocessor variable expansion, which falls back to
environment variables if the variable isn't set (like in Make). It can
also be used in prompts, 'comment's, etc.
The old syntax will probably be supported forever in Kconfiglib for
backwards compatibility, but might as well make it consistent now that
people might start using the preprocessor more.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The prefixes might be a leftover from the old 'option env="..."' symbols
(which are no longer needed). Since environment variables can be
referenced directly now, there's no point in having a prefix.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Put all tinycrypt tests into one project. Having project for every small
feature does not scale and slows down testing and CI operations.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This converts the http links within the Zephyr document
into references. This allows the links within the PDF file
to jump to the correct sections instead of going to
the Internet.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The chain of dependencies works for make but not for Ninja.
Make it explicit so Ninja will work to generate PDF.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Rather than having some implied name for the logging name, explicitly
pass it in the macros LOG_MODULE_REGISTER & LOG_MODULE_DECLARE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Replaces direct accesses to the peripheral registers structure
with the proper GPIOTE HAL function added recently to nrfx.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Updates nrfx to the recently released version containing needed
enhancements of GPIOTE and PPI HALs.
Origin: nrfx
License: BSD 3-Clause
URL: https://github.com/NordicSemiconductor/nrfx/tree/v1.2.0
commit: d19018ed334c26f0d9eb35cf7f5a622df8d54346
Purpose: Provide peripheral drivers for Nordic SoCs
Maintained-by: External
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Instead of documenting in rst, pull the API from USB Device Core Layer
header.
Fixes: #5702
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes issue with USB subsystem doc not pulling from header
doxygen comments of USB Device Controller code.
Fixes: #5702
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Clean doxygen documentation and add _usb_device_controller_api group
to be added to the API documentation.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This commit updates the power_mgr sample to use the dts-generated
defines instead of the aliases in board.h.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
This commit updates the onoff-app sample to use the dts-generated
defines instead of the aliases in board.h.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
This commit updates the onoff_level_lightning_vnd_app sample
to use the dts-generated defines instead of the aliases in board.h.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
The LEDs, buttons and necessary aliases are now configured via dts.
This commit breaks the samples under boards/nrf52/mesh:
- onoff-app
- onoff_level_lighting_vnd_app
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
The LEDs, buttons and necessary aliases are now configured via dts.
This commit breaks the sample under samples/boards/nrf52/power_mgr.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
This commit updates the button sample to use the dts-generated
define to configure the button pull-up when the custom define
is not present.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
This patch adds USB capabilities to the stm32f4 discovery board.
As the board has a MicroUSB port that I would like to use as stdout I
just added USB. The needed entry within pinmux.c is already there but
USB was missing in the dts file and documentation.
I tested it with the upcomming commit.
Signed-off-by: Alexander Polleti <metapsycholo@gmail.com>
According to Device Tree specification, previously
defined nodes may be deleted with the followin
syntax:
/delete-node/ node-name;
or
/delete-node/ &label;
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
