This reverts commit 6d5ac1c089.
Looks like this was not correctly done, building btsim is needed on all
nodes.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Building docs and running various checks is now being done in another CI
job that runs in parallel and reports directly to the PR.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We should leave ZEPHYR_BASE alone and create the test output wherever
we are running.
This will support running sanitycheck on test roots other than zephyr's
main git repo.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
right now we assume we are running the tests inside the Zephyr tree and
things do not work well when someone tries to use sanitycheck on tests
outside the tree with a different test root. Cleanup the name handling
and support running outside of Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Logging subsystem could take few extra bytes when enabled.
ECC thread stack has been unconditionally increased to
support it.
During my test, I noticed a usage of 1052 bytes when logging
subsystem is enabled.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
Adds the virtualcom device to the nrf52840 SoC dts and adds a board
specific nrf52840_overlay.dts file, copied exactly from the
arduino101_overlay.dts file, to set the console device name
appropriately for the subsys/usb/console sample project.
There were no clear alternatives to add a usb_cdc: virtualcom device to
all known SoC devices with USB support as should probably happen.
There was also no clear alternatives to add a non-board specific overlay
to the example.
This fixes a specific problem with the nrf52840-dk board for this sample
project.
Signed-off-by: Tom Burdick <thomas.burdick@gmail.com>
RTT backend was returning number of transfered data equal
to requested amount because it was not taking into
account value returned by SEGGER_RTT_Write. As the outcome
data could be lost.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The call to z_clock_set_timeout() was being made outside the timeout
lock, which can race against other contexts setting sooner-expiring
timeouts.
Also add a long comment to one spot (timeslicing) where this call is
made outside the timeout spinlock (inside the scheduler lock) and why
this is OK.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Adds support for debugging and flashing the mimxrt1050_evk board via
pyocd. Support for this board has not yet been merged in upstream pyocd,
therefore the default in zephyr is left as jlink.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
We use the sector size rather than the page size as some
modules that consumes the flash page layout (such as FCB)
assume the page size is the minimal size they can erase.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
This is a follow-up to commit b3ca789ef25627bcf7b02ec2aa7fa900fba37227.
Apparently, another driver needed to be updated but this was not caught
up in CI builds at that time.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Modem driver for WNCM14A2A was erroneously leaving the
selection of UART_INTERRUPT_DRIVEN up to CONSOLE_HANDLER.
Now, with the move to the new SHELL backend, this is no
longer happening.
Let's select it from the modem driver, instead of depending
on it.
Let's also add a dependency on SERIAL_SUPPORT_INTERRUPT
which the serial drivers enable to let us know
UART_INTERRUPT_DRIVEN is available.
Signed-off-by: Michael Scott <mike@foundries.io>
- Support sending status to github
- Support license checking
- Make every test a class
- Use junitparser instead of custom xml for junit output
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When users are configuring applications they are given the option
to enable the DesignWare SPI driver. But they should not be given this
option on SoCs that don't have the DesignWare SPI HW.
This commit hides the driver by default by introducing the config
option HAS_SPI_DW.
Fixes: #10825
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds support for STM32L471xG. Since STM32L475 only adds
USB, stm32l475.dtsi now includes stm32l471.dtsi
Signed-off-by: Kiril Zyapkov <k.zyapkov@allterco.com>
This patch adds a flash driver for the Atmel SAM E70 SoC. The driver has
been kept simple by considering that the flash is only composed of 8-KiB
blocks. Indeed an area at the beginning of the flash might be erased
with a smaller granularity, and the other blocks can also be erased with
a higher granularity. It also only handles the global read/write
protection, not the 128-KiB lock regions. A write error is returned if
a region is locked.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove having ${BOARD_DIR} in the global include path for Zephyr builds.
Needed to add this to the arch/posix because of how posix "boards"
define various things like interrupt handling.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Merge up_squared_dts_fixup.h and up_squared_sbl_dts_fixup.h into
dts_fixup.h. This allows us to remove BOARD_DIR from being included
everywhere.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The 'FindPythonInterp' that is distributed with CMake 3.8 is affected
by bug: https://github.com/zephyrproject-rtos/zephyr/issues/11103
To work around this, until we upgrade to 3.13, we copy and patch the
3.8 version of 'FindPythonInterp' into the Zephyr repository.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Copy the 3.8.2 version of FindPythonInterp.cmake into the repo so that
we can patch it and fix#11103.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
With this commit now it is simple to understand flow of logic when
NODE receives any message & how it proceed things one by one.
Plus NODE will immediately send GET status to Client instead of
waiting for things which has less priority.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
In order to prevent failing tests on i.MX RT the following samples were
limited to a minimum 140k of flash: http_client, http_server,
socket/echo_client and sockets/echo_server.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Enables Networking hardware on i.MX-RT 1050-EVKB board.
Pinout enabled board specific etherenet connection, also pin
initialization was moved later to PRE_KERNEL_2 in order to have
sysclock initialized before.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Enables Networking hardware on i.MX-RT type drivers.
Reuses the same eth_mcux driver used by Kinetis family; initialization
sequence refactored to work with this board as well. Unlike Kinetis
family, i.MX has a single ENET interrupt and we need to discriminate
between interrupts using a status register.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
The gen_isr_table test now tries to install two dynamic
IRQ handlers.
RISCV32 has a workaround due to limited number of SW
triggerable interrupts that can be configured.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Modified log_filter_set function to limit level if requested
level is not compiled in. Additionally, extended function to
return actually set level. Removed redundant code from log_cmds.
Change fixes shell log backend initialization which was setting
log levels without taking into account compiled in limits.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This makes it clear that only request need to set an opcode since they
require a error response in case it fails.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The comment was suggesting that write callback was reading and storing
buffer when in fact it should write to the attribute value.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Application may need to handle the write differently depending on the
write operation so this adds a flag called BT_GATT_WRITE_FLAG_CMD which
can then be checked by the callback, for instance one can respond with
BT_ATT_ERR_WRITE_REQ_REJECTED when that flag is not set which should
indicate to the client to use write command instead.
Fixes#11206
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>