This function returns an essential boolean type, just changing the
signature to return a boolean type.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Updated flash partitions to extend supported boot scenarios.
Add support for using Nordic nRF5 bootloader to:
- flash a Zephyr application
- flash a MCUboot image as an application
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Changes to Bluetooth shell application related to the
controller split architecture preparation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Preparation to introduce the Upper Link Layer (ULL) and
Lower Link Layer (LLL) split architecture.
- Move SoC dependent HAL to vendor specific folder.
- Preparation to split data structures into ULL and LLL
types.
- Added more role and state conditional compilations.
- Added some work-in-progress implementation of advertising
extensions, will be used as inspiration in the new split
architecture work.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This fixes usage of an uninitialized variable (to_store) as introduced
by commit bfad2a0.
Fixes#12314
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Currently OpenThread commands have to be prefixed in the shell by "ot
cmd", for example "ot cmd state". With the new shell, it is possible to
remove one subcommand level and change it to "ot state".
At the same time validate the number of arguments using
SHELL_CMD_ARG_REGISTER and improve the help message.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Following the introduction of the new shell, the OpenThread shell
wrapper is not well integrated. It outputs the answer to a command using
printk(), which is not necessarily using the same device than the shell
if "zephyr,console" does not match "zephyr,shell-uart".
OpenThread calls the otConsoleOutputCallback() function to output the
answer to the shell. It can provide a callback argument, but defined
when OpenThread is initialized, not when the command is submitted.
Workaround that by taking a copy of the shell argument in a static
variable and use it for the call to shell_fprintf(). It is not perfect
if two or more shells issue concurrent commands, but is already an
improvement compared to printk().
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Check should be done with & instead of | otherwise it will always be
evaluated as 1/true regardless of the flags.
Fixes#12308
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Extend the "slow" flag on tests to inhibit building too. The original
assumption was that building would be fast but running slow, but now
We have tests using a component (OpenThread) that wants to pull and
build software from github for every app.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The current OpenThread integration wants to download (from github) and
configure the OpenThread source tree every time the app is build. We
don't want to be doing this in quadruplicate every time sanitycheck is
run.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These tests were defining a "test_kw41z" case, but that platform is
already whitelisted in the main ("test") case, and this one defines no
different behavior. It's just a dupe.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fixes an ethernet build error introduced with MCUXpresso SDK 2.5.0,
caused by a slight change in the ethernet pll configuration structure.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Xtensa toolchain has a HAL library that needs to be compiled in similar
to how we do this with the Zephyr SDK.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
As mentioned in issue #12265, some APIs
aren't included in the generated
API docs because doxygengroup directives were missing. Also add a
comment referencing defgroups that are just organizational and the
scanning script can ignore.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add uart5 nodes to stm32f1 series dts.
Provide matching dts_fixup add-on.
Signed-off-by: Chen Han <qq1433255094@outlook.com>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Introduced by commit id de78a7af28.
If the sum is 0xffff, a ~sum will give 0.
Fixes#12164
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The 'doc' build has been invoking 'project' with the argument "VERSION
${PROJECT_VERSION}". This is cargo-cult code inherited from the
toplevel build system.
This can be safely removed because in the doc build the versioning
variables that are set by 'project' are unused and PROJECT_VERSION is
not available to be de-referenced at that point in time any way ...
This fixes#12282
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Following the standard GCC RISC-V convetion use __riscv for the RISC-V
specific define:
41d6b10e96/gcc/config/riscv/riscv-c.c (L37)
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Updates the MCUXpresso SDK to version 2.5.0 for applicable SoCs.
Wireless (KW*) and legacy (KL25) SoCs were not included in this
MCUXpresso SDK release and are therefore not updated here.
New in this release is SoC-level and board-level support for external
xip flash in the i.MX RT family.
For RT1050, we are now using the MCUXpresso SDK for the EVKB version of
the board, which correponds to an upgrade from A0 to A1 silicon.
However, we don't yet have Kconfigs in place to support A1 silicon part
numbers, and therefore add a simple cmake hack to convert A0 part
numbers to A1 part numbers.
The SDK flash driver interface also changed slightly in this release,
and thus the zephyr flash shim driver is updated accordingly.
Origin: MCUXpresso SDK
License: BSD 3-Clause
URL: mcux.nxp.com
Purpose: Provide device header files and bare metal peripheral drivers
for Kinetis, LPC, and i.MX SoCs.
Maintained-by: External
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Devices with external xip flash like the rt1050 and rt1060 have
additional support files in the MCUXpresso SDK. Enhance the mcux import
script to pick up these files.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Updates the mcux import script to place fsl_iomuxc.* files into the
device-specific folder rather than the shared driver folder.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This file was moved into a device-specific folder in commit
282d95f655 but inadvertantly added back to
the imx driver folder in commit
a4633da9f5.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The segment size computation has value, but it's actually a very slow
process that parallizes poorly. It seems to be bound by the Python
GIL doing the parsing, so never sees more than about 150% of CPU in
use even on wildly parallel systems. And it takes about 75-80
seconds, which is 15-20% of the entire runtime of the test on that
box!
And the only "failure" case this can detect (unexpected sections in
the output file) is now a duplicate of the orphan section warning
we've since enalbled at the linker level.
This defaults to enabling the test to preserve behavior (as I don't
know where all the existing users of the size report are to change
them), but long term we might consider making "disabled" the default
and switching this to an --enable flag.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
With the new implementation we do not need a NULL terminated list
of kobjects. Therefore the list will only contain valid entries
of kobjects.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This API was using variable number of arguments. Which is not
allowed according to misra c guidelines(Rule 17.1). Hence making
this API into a macro and using the util macro FOR_EACH_FIXED_ARG
to get the same functionality.
There is one deviation from the old function. The last argument
shouldn't be NULL.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This new macro will be able to do FOR_EACH with a fixed argument.
This fixed argument will always be called as the 2nd argument
to the function call(_fn).
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
