Previous SAM E70 HAL version was patched by commit 4dcfc8706 ("Add
missing interrupt number definitions") to add missing interrupt
definitions for SAM GMAC Priority Queues. This has been fixed in the
latest HAL by using a slightly different name. This patch updates the
driver accordingly.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Following the HAL import, reapply the part of commit 133306152 ("Add
missing header files symbols for Atmel SAM E70") which hasn't been fixed
upstream yet. From this commit, only the DACC alternate pin functions
have been fixed.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This is an import of Atmel SAM E70 HAL version 2.3.98, and only for the
revision A of the chip. The files have been passed through dos2unix to
minimize the differences with the previous version which seems to also
have been imported that way. All the patches that have been applied on
the previous version have been removed.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
off_t is int with the minimal libc and long with the newlib libc. The
log messages are assuming that off_t is int, therefore this causes
warnings when building with newlib.
Fix that by casting the offset to the "longer" type, ie long.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Every now and then the 100ms delay for collecting IMEI data from the
modem, wasn't long enough and this presents a bad user experience.
Let's set it to 500ms which seems to be working all the time.
Signed-off-by: Michael Scott <mike@foundries.io>
During development of the WNC-M14A2A modem driver, I felt like the
initialization took too long to make the user wait. However, due
to the addition of other drivers such as OpenThread where delays
during startup are noticable, the modem startup time isn't so bad.
Let's remove the delay work which allows Zephyr to startup before
the modem is fully initialized.
NOTE: This also fixes a long standing bug where samples using the
modem would never know when it was ready (without waiting for the
interface up event). This change makes it always ready once the
sample starts.
Signed-off-by: Michael Scott <mike@foundries.io>
Don't add non-existing include directories, it creates noise and even
warnings in some tooling, like Eclipse.
This fixes#12696
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Rework extract_{controller,cells} so they aren't recursive. As part of
this change we take the flat cell array property and build a proper list
based on what the number of cells each element would represent.
Fixes#12724
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Because of differents in dtc versions the output of a list property may
vary. We would flatten the list of lists to a single list to match how
older dtc versions did things. Rather than doing that flattening in
multiple places, move it to get_reduced() so we do it just once.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Leftovers from legacy MQTT removal commit, now all traces of the
old MQTT implementation are gone.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is the macro name that matters, not its value. Here, that will help
to save 1 bit in struct net_pkt later on.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Introduce the first of the toolchain_cc-family of macros:
toolchain_cc_security_fortify and toolchain_cc_security_canaries.
No functional change expected.
Fortify source is not supported by Clang, but this commit retains
current behavior.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting easier porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Now that the descriptor lists are in non-cached memory, the helpers are
just accessing the w0 or w1 members of the structure. Just drop them and
access the members directly.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Atmel SAM Ethernet module is using a scatter-gather technique to
exchange data with the Ethernet driver. To communicate the location
of the data buffers the driver sets-up a so called descriptor list. This
is effectively a place in RAM containing a sequence of 32-bit words
representing buffer location and its status.
Currently the cache coherency is handled using cache clean or
invalidate. Unfortunately this strategy only works correctly when the
corresponding data size is a multiple of the cache line. This is not
the case here and might lead to data loss or corruption.
Instead of using cache operations, this patch moves the descriptor
listed to the recently added non-cached memory region, as recommended by
ATMEL. A data synchronisation barrier is still required for writes, as
the non-cached memory is defined with TEX=1, i.e. it is not strongly
ordered. The descriptor lists alignment can be decreased to 4 bytes, as
required by the SAM Ethernet module.
The RX/TX buffer are left unchanged, still managed by cache operations.
Fixes#9812
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The RX buffer accounting list is not a list shared with Ethernet device,
therefore there is no need to run a cache clean operation on it.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The MQTT over sockets doxygen group was not referenced, hence the API
documentation was missing. Replace legacy MQTT lib reference with a new
one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
RTT log backend was locking in panic if host absense was not yet
detected (early panic). It is fixed by adding detection of host
absense while pending on data being read by the host.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added display text management to shell_fprintf function.
Now it can be used from diffrent threads with not risk that
displayed lines will overlay.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Removed foreground command functionality from shell source files.
Removed associated example.
Removed enter/exit command functions from the Bluetooth example
Updated project config files.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
After receiving FIN, the TCP stack will send a FIN and start
a timer to track the reception of the associated ACK. In case this
ACK is never received then the context will be released
without calling the associated received callback which leads to
upper layers not being informed that the connection was closed.
This issue was observed when using sockets, the effect is
that in this case the socket would never be closed and stay
in limbo forever.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
The WNC-M14A2A modem is supposed to use HW flow control on the UART
connected to the MCU. In the past, we were able to bypass this
requirement by using only the LTE-M firmware which supported pulling
the CTS line high via "send-ok" gpio.
This does NOT work for the LTE firmware.
Now that MCUX UART driver supports hw-flow-control setting, let's use
it in the modem overlay so that regardless of modem firmware
(LTE vs. LTE-M) the sample will "just work".
Signed-off-by: Michael Scott <mike@foundries.io>
Now that a hw-flow-control DTS binding has been added for MCUX uart,
let's check for the DT_ define and enable support in the MCUX HAL
layer.
Signed-off-by: Michael Scott <mike@foundries.io>
Support for HW flow control was recently enabled in the NXP MCUX
HAL layer. Let's add a DTS binding definition for "hw-flow-control".
The MCUX uart driver shim can use this to enable HW flow control.
Signed-off-by: Michael Scott <mike@foundries.io>
The relationship between lwm2m_engine_context and lwm2m_message
has always been a tenuous one. Let's merge the 2 structures
into lwm2m_message and remove all of the extra stack variables.
This change increases SRAM usage slightly due to the
addition of the context structures to the multiple lwm2m_messages.
However, the way lwm2m_engine_context was being used off the stack
was probably creating hard to debug issues in the longterm.
Also, having all of the structures in 1 place makes sharing them
much easier later.
Signed-off-by: Michael Scott <mike@foundries.io>
Reported by Github user himanshujha199640 using coccinelle:
subsys/net/lib/lwm2m/lwm2m_obj_device.c:172:5-16:
WARNING: Unsigned expression compared with zero.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/11135
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_CONTEXT_NET_PKT_POOL is used by Zephyr's TCP stack as
a way of keeping the original packet data when compression and
other l2 specific actions make the data unusable for retries.
LwM2M uses UDP and this option was never used.
Signed-off-by: Michael Scott <mike@foundries.io>
Convert ssd1306 display driver to use new defines so we can remove
the dts_fixup.h code for it. Also dropped "-i2c" from compatible.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert ssd1673 display driver to use new defines so we can remove
the dts_fixup.h code for it. Also dropped "-spi" from compatible.
Fix up references in reel_board dts and sample.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Make sure we capture data from gcov and do not timeout before all the
data has been captured. Also report on incomplete data capture.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When building with older versions of the toolchain we need to use gcov
from the same tool set, otherwise data formar might not be compatible.
Added an option to point to the gcov tool from the same toolchain used
to build the code. By default the host gcov is used.
Relates to #12571
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The app shared memory macros for declaring domains provide
no value, despite the stated intentions.
Just declare memory domains using the standard APIs for it.
To support this, symbols declared for app shared memory
partitions now are struct k_mem_partition, which can be
passed to the k_mem_domain APIs as normal, instead of the
app_region structs which are of no interest to the end
user.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Convert the lpd880x driver to use device tree and new DT_<COMPAT>
defines. Support both LPD8803 & LPD8806 device tree compats.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
SNTP client sample requests time sync on IPv4 and IPv6 addresses
using socket based SNTP client library.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
As networking libraries and protocols are moving to socket
based implementation, reworked SNTP client library to use sockets.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add sam0_rtc_driver that implements system timer API on top of the RTC
and can be used as a replacement for the default systick timer.
Signed-off-by: Martin Benda <martin.benda@omsquare.com>
