According with MISRA-C every switch-clause must terminate with an
unconditional break.
MISRA-C rules 16.1 and 16.3
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
According with MISRA-C every switch-clause must terminate with an
unconditional break.
MISRA-C rules 16.1 and 16.3
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Rephrase prompts for a few options in drivers/spi/Kconfig.nrfx
so that their purpose is presented a bit better.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In Nordic SoCs, SPI and TWI peripherals with the same instance number
share certain resources and therefore cannot be used at the same time
(in nRF91 Series this limitation concerns UART peripherals as well).
This patch adds Kconfig checks ensuring that only one of such mutually
exclusive peripherals can be enabled.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Definitions of these two options were missing, altought the symbols
that would be created for them were already referenced from
`ext/hal/nordic/nrfx_config_nrf9160.h`.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
These entries should have been added in the initial version of
this file (in commit 99bab3f478)
but their absence was overlooked.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This patch adds missing SPI_3_NRF_SPIS Kconfig option (referenced by
`ext/hal/nordic/nrfx_config_nrf9160.h`, although not defined anywhere)
and adds support for SPIS3 instance in the nrfx_spis driver shim.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Fix issue reported by coverity regarding using volatile
variables in zassert_equal macro.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix issue reported by coverity regarding using volatile variable
in zassert_equal macro.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
App shared memory defines a bunch of symbols in the
linker script. Namespace them properly as private
zephyr variables.
The variables which indicate the bounds of the entire
partition now end with "_part_start", "_part_size",
and "_part_end" to make them easy for scripts to
distinguish them from other generated symbols for
data/bss sizes.
Finally, the bss size is not rounded up, this was
causing unnecessary memory to be zeroed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit removes build warnings in the SimpleLink SDK's driver.c file
by updating CMakeLists.txt
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
When using the wifi driver, we should automatically select
CONFIG_POSIX_API and CONFIG_PTHREAD_IPC. This is necessary given the
code in the new SimpleLink host driver from the SimpleLink SDK uses
pthread and sem.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
We should use the headers from Zephyr, not the ones provided by TI for
their posix implementations.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
We are using the external spawn option, hence must make a change
to point to our os_Spawn implementation.
We are also supplying errno values that are missing from Zephyr errno.h
and the external errno setter function, to allow the SimpleLink
driver.c to compile.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Add/Update files taken from TI CC32XX SDK, including
- peripheral drivers
- driverlib (HAL)
- WiFi host driver and porting layer interface headers
Origin: Texas Instruments cc32xx SimpleLink SDK
URL: http://www.ti.com/tool/download/simplelink-cc32xx-sdk
Purpose: Provide driver libraries and HAL for TI CC32XX SoC
Maintained-by: External
Fixes#11126
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This is done to conform with how the rest of the socket APIs are
implemented during socket offload. Otherwise link error would
result due to the symbol being redefined in lib/os/fdtable.c.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
We need to set CONFIG_HW_STACK_PROTECTION=y, instead of the
internal symbol CONFIG_MPU_STACK_GUARD, in order for fatal.c
to be able to parse the error code. MPU_STACK_GUARD is,
anyway selected if HW_STACK_PROTECTION is set.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The L2 documentation was describing functionality that has changed
recently. Now it should match the current reality.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
net_pkt_alloc_with_buffer() takes IP header and protocol header
length while calculating total length internally. Need not
specify explicitly. Also mutex was not properly initialized.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
As per RFC2131 4.1.1 requires we wait a random period
between 1 and 10 seconds before sending the initial
discover. But tests can not wait that longer. So this
option helps test to configure the value to minimum.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add useful information to the error message printed when the installed
SDK does not fulfill version requirements.
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
The mbedtls library has some globals which results in faults
when user mode tries to access them.
Instantiate a memory partition for mbedtls's globals.
The linker will place all globals found by building this
library into this partition.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some init tasks may use some bss app memory areas and
expect them to be zeroed out. Do this much earlier
in the boot process, before any of the init tasks
run.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Based on the definition of _ARCH_THREAD_STACK_DEFINE() macro
for ARM, the MPU Stack Guard region is placed inside the
allocated stack object, only if
CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT and CONFIG_USERSPACE
are both set. For ARM stack objects, allocated using the
_ARCH_THREAD_STACK_DEFINE() macro, such as the threads' stacks
and the interrupt stack, the above must be reflected on how we
set the initial start of the stacks.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Previously, _prf function was used when present and _vprintk
was used otherwise. _prf supports reacher formatting but at
cost of 3k flash and >250 bytes on stack. Stack usage then
depended on which function was used and that was causing
troubles when trimming stack sizes.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
No Kconfig symbol called NET_GPTP_STACK_SIZE has ever been defined in
the Zephyr repo. Drop the CONFIG_* prefix from the #define.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Converts the rv32m1 timer driver to use 'DT_' prefixed defines instead
of deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts the rv32m1 pinmux driver to use 'DT_' prefixed defines instead
of deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts the rv32m1 interrupt controller driver to use 'DT_' prefixed
defines instead of deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts the rv32m1 clock control driver to use 'DT_' prefixed defines
instead of deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts the rv32m1 gpio driver to use 'DT_' prefixed defines instead of
deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The LwM2M public APIs were never well documented. Let's fix
that by adding the needed information to include/net/lwm2m.h
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/12958
Signed-off-by: Michael Scott <mike@foundries.io>
Check the return value of mayfly_enqueue() and assert if not successful.
Coverity ID: CID 190991
Fixes#13833.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Inside ll_test_end(), result of lll_clk_off() is not checked
which might result in releasing resources acquired for radio.
Coverity-CID: 190954
Fixes: #13861
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
This example combines 2 HID classes and 2 CDC ACM classes to create
a composite, multi-instance device.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
