This patch adds support for Read Using Characteristic UUID which is one
of the procedure to read the characteristic value especially when the
client only knows the characteristic UUID and does not know the handle
of the characteristic.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
By selecting CONFIG_THREAD_NAME. It makes sense to have this enabled
by default for tests, to easy debugging in a case of crash.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It's relatively hard to figure out what thread a crash happens in
from the crash dump. E.g, it's usually not immediately possible to
find it out from linker map due to the fact that static symbols are
not there (https://sourceware.org/bugzilla/show_bug.cgi?id=16566).
So, try to do it as easy if possible, by just printing thread name
in a dump, if thread names are enabled at all.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We need to re-initialize the trickle->timer delayed work to use
trickle_timeout() if there are multiple triggerings.
Fixes#15606
Signed-off-by: ling wei <lingwei@cisco.com>
Existing sntp_request() function has a coarse integer seconds
precision, discarding fractional part as returned by SNTP.
Deprecate it, and instead introduce sntp_query() function which
returns both integer and fractional seconds as a newly introduced
structure sntp_tstamp.
Fixes: #15596
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
1. Output what steps the app performs, so it doesn't look to user
that it simply hanged.
2. Don't use infinite timeouts, because that will hang.
3. Clearly note which requests are for IPv4 vs IPv6 server.
4. Define IPv4 gateway. This sample is configured to run against
SNTP on local Linux host, but standard distros (e.g. Ubuntu) don't
run SNTP server by default, so usual outcome for running this sample
will be timeout. A realistic way to get successful output would be
to run it against a server on the Internet, for what a gateway is
required.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Previously, a case when poll() call timed out wasn't handled, and
recv() was called unconditionally. In the case of timeout, recv()
itself would hang indefinitely.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When there is no need to divide the PWM clock (i.e. the requested
period cycles fit the 15-bit PWM counter), the prescaler value
should be 0, not 1.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
When making a build folder pristine until now we were running the
'pristine' build target. The issue with that is that ninja/make or
whatever build tool is being used might decide to re-run CMake itself if
some of the dependencies have changes. This might trigger an error that
is unfriendly and unnecessary, since the user is explicitly asking for
the build folder to be wiped before starting a fresh build.
To avoid this issue restor to running directly the CMake script that the
'pristine' build target itself uses, so as to make sure that the build
folder is wiped unconditionally regardless of changes made to the tree.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The test is to run for boards that have memory protection
enabled; having MPU capabilities on the SoC level is not
sufficient (the user, or the board itself, might not enable
memory protection support). This commit applies that policy
to the mem_protect/protection test suite.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Added implementation to pause data PDU transmission during
PHY update procedure in order to comply to BT Spec. v5.1
Vol.6, Part B, Section 5.1.10.1 Packet transmit time
restrictions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor refactoring to move PKT_US into ULL internal header,
and rename ull_conn_allowed_check to ull_conn_llcp_req.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ported implementation of Data Length Update Procedure to
ULL/LLL architecture of the Link Layer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The GPIO driver for the Intel Apollo Lake has so many pins it has to
export ten devices to shoehorn its one device into the GPIO API. The
current implementation uses the shared IRQ driver because these
pseudodevices all share one IRQ. However, since the GPIO driver is
aware of all the possible interrupt sources, it's smaller and faster
(and not even messy) to handle it internally, so this patch eliminates
the dependency on the shared IRQ driver.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This commit prevents a situation when stored and possibly modified
commissioner dataset is overwritten with default configuration during
OpenThread initialization.
It introduces a new function, openthread_start, which verifies if the
dataset is already stored, and if not, depending on configuration,
preloads the default configuration or initiates the join procedure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The function net_pkt_get_info() is found in net_pkt.h and not
in buf.h. This caused
"implicit declaration of function ‘net_pkt_get_info’"
warning if CONFIG_NET_BUF_POOL_USAGE was enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the NET_IF_NO_AUTO_START network interface flag is set, then
do not take network interface up during the initialization of the
network interface. The network device driver can set the flag in its
network interface initialization function if needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Provide access functions for manipulating network interface flags.
There is no need for the caller of this API to know about the inner
details of the flags.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add more Kconfig options to prj.conf file. In the future we need
to compile also in other hw than qemu_x86 in which case we need to
create separate test cases for those configurations.
Fixes#15282
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Migrate from "legacy" PCI support (drivers/pci) to new PCI(e) support.
The e1000 driver is merely for testing with QEMU and so should not be
a model for the use of PCI(e) functions. Consult instead "real-world"
PCI(e) drivers like the NS16550 UART (drivers/serial/uart_ns16550.c).
Signed-off-by: Charles Youse <charles.youse@intel.com>
Add board support for 96Boards WisTrio LoRa Tracker board from
RAK Wireless. This board is one of the 96Boards IoT Edition platform.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
This commit adds the STM32CUBE HAL for STM32L1x series MCUs.
Origin: ST Microelectronics
License: BSD-3-Clause
URL: http://www.st.com/en/embedded-software/stm32cubel1.html
Commit: 1.8.0
Purpose: HAL layer for STM32L1
Maintained-by: External
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Using the new option --timestamps, any output from sanitycheck will have
a timestamp to help identify bottle necks and monitor execution time.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When detecting changes to boards, make sure we test all board
configurations available in that board directory, not only the main one.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We already select HAS_DTS at the arch level for X86 so we don't need to
duplicate it at the board level.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
None of the UART drivers actually reference the PCI data members
declared in this header, so they are removed.
Signed-off-by: Charles Youse <charles.youse@intel.com>
