Added check to see if CONFIG_BT_CTLR_TX_BUFFER_SIZE is defined,
and use that as the BT_L2CAP_MTU if that is the case. Otherwise,
use the previously hard coded MTU size (64). This enables users
to configure the MTU, enabling longer transfers.
The fix was inspired by how this is solved in
samples/bluetooth/hci_uart/src/main.c
Tested on nrf52840_pca10056.
Signed-off-by: Dennis Wildmark <dennis.wildmark@assaabloy.com>
This board and the native_posix board share the POSIX architecture.
Some of the native_posix drivers/backends only rely on the
underlaying operating system API, and do not require any special
HW model to operate.
Therefore it is quite easy to reuse some of them into this board.
Currently the only limitation for some, is the interface they use
in the board to register their command line arguments.
This header provides a minimal shim to rename the, otherwise
equivalent, call.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The function error expects only one parameter. The excpetion handler in
scan_path was calling this function with multiple parameters instead of
formatting the string.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
A new function pcie_irq_enable() is added to be used in lieu of
irq_enable() when the target device is PCI(e)-attached. The function
attempts to use MSI, when configured in the kernel and supported by
the endpoint; failing that, it will verify that IRQ requested is in
fact routed to the device by the boot firmware before enabling it.
The NS16550 UART driver is updated to use pcie_irq_enable().
The PCI(e) shell is extended to dump information about wired IRQs.
The up_squared devicetree is fixed (reverted?) to IRQ5 for UART1.
The galileo enables MSI by default.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The size of the ROM region is now rounded up to the
nearest power of two; we no longer assume that RAM
is in a different part of memory.
Fixes: #15558
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Modified commands which depends on compile time flags to
use conditional macros.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added macros which can be used to create a command which depends
on compilation flag. Macros are a cleaner alternative to #ifdefs
around command registration and command handler.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add a Kconfig option to enable DMA for SPI with SOC_NRF52832 as long as
it being disabled due to Product Anomaly Notice (PAN) 58 is explicitly
overridden. This allows the SPIM driver to be enabled for the nRF52832
SoC for situations where PAN 58 is not a problem.
Signed-off-by: Andrew Fernandes <andrew@fernandes.org>
The init routines are the same for SAMD20, SAMD21 and SAMR21, so
move them into common/ to not have three copies of the same code.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
The Atmel SAMD21 (and therefore also the SAMR21) comes with the same
RTC peripheral as the Atmel SAMD20.
Enable it in dts_fixup.h and enable it in the dts for samr21_xpro.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Add the Atmel SAM R21 Xplained Pro Evaluation Kit to zephyr.
So far, UART, SPI, I2C (depends on #14128), debug LED and user button
have been tested.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Adds Atmel SAMR21 soc which is based on SAMD21, but with a AT86RF233
radio connected internally via SPI.
The AT86RF233 is not yet supprted by Zephyr at this point.
This code is very much copy & paste from atmel_sam0/samd21
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
Atmel Software Framework (ASF) provides a set of low-level header
files that give access to different hardware peripherals of Atmel's
ICs.
Origin: Atmel SAMR21 Series Device Support (1.1.72)
License: Apache-2.0
URL: http://packs.download.atmel.com/Atmel.SAMR21_DFP.1.1.72.atpack
Purpose: Introduction of ASF for the SAM0 series.
Maintained-by: External
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
toolchain_ld_base() represents flags that are fundamental to linking or
otherwise does not belong in any further specified linker flag category.
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
The LINKER variable is introduced to follow the same logic and flow as
the existing COMPILER variable: That is, each TOOLCHAIN is responsible
for choosing COMPILER and LINKER.
Currently, Zephyr's build system is hardcoded for GNU ld.
Reflect this in LINKER by letting all existing toolchains use GNU ld.
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
toolchain_cc_nostdinc does not only obtain flags (to be placed in a
variable), it obtains and applies them.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Add verification that interface number and endpoint addresses are
correctly allocated.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use new method for defining USB CDC ACM devices using UTIL_LISTIFY and
device count from menuconfig.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
DEVICE_COUNT for some USB classes means how many instances of the
class can be supported by USB stack.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The upipe specific configuration options are selectable unconditionally.
This commit makes them depend on the upipe driver being enabled.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
Disable bulk slot image erase when progressive erase is on.
Erase of image bank is performed by image collection procedure
progressively.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Patch adds option for progressive erase of firmware image.
When using this, flash is erased as necessary when receiving
new firmware, instead of erasing the whole image slot at once.
This is useful on some hardware (like nRF52840) that has
long erase times, to prevent long wait times at the beginning
of the DFU process.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Fixes: #15664
This commit improve error messaging in case `west` list fails.
Previously any error messages and stack trace reported by `west` will
was thrown away by zephyr_module.py.
Now the error, as well as any stack traces, printed by `west` will be
re-printed to the user.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
There was a stray close group comment @} that was causing a large chunk
of the watchdoc API documentation to be missing.
Fixes: #15678
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Removed the CONFIG_ prefix from definitions, which are declared in the
test source file. They could be easily confused with Kconfig
definitions.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Since STM32_OSPEEDR_VERY_HIGH_SPEED flag is required for all I2S_CK
pins, lets add this to the STM32F4 pinmux header and remove the
duplicates in board files. While we are at it, let's add the missing
pinmux definitions for I2S_2 also.
Fixes: #9028
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Exclude the two variants of smt32_min_dev (stm32_min_dev_black and
stm32_min_dev_blue) from kernel tests.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Replace image and reword some sections to indicate the presence of two
board variants: stm32_min_dev_(blue|black)
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Add support for blue pill and black pill variants of the STM32
minimum development board by splitting board configuration into
stm32_min_dev_blue and stm32_min_dev_black.
CODEOWNERS: Add myself (@cbsiddharth) as codeowner for stm32_min_dev
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
